Expert Service 1-877-289-7664 [Hours]

Infinity Kappa 10.11T

3/4" Kappa Series Soft Dome Tweeters w/ Crossovers

In Stock
|

List price $259.99

$119.99

with warranty

You Save: $140.00 (53.85%)

Arrives by Friday, Oct. 3 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Fri, Oct. 3

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

Free Gift: One Pair 50% OFF with purchase!

For a limited time only, buy one pair of Infinity 1011T and get one for 50% OFF, a savings of $59.99!

60.00

60701

696

Infinity Kappa 10.11T

$119.99

+

50% OFF

Infinity Kappa 10.11T

$119.99

Special Price $59.99 ($119.99 if purchased separately)

Infinity Kappa 10.11T

(Offer 1 of 1)

Combined Total Price

$179.98

You Save $60.00


Also Available as Open Box (Like New) for $127.98


Hear all the high frequencies that your sound system is missing

The Infinity Kappa Series 10.11T 3/4" Soft Dome Tweeters with Crossovers can turn any car into a high-fidelity audio loverís dream. The tweeter is a soft-dome, edge-driven fabric diaphragm provides spectacular power handling and broad high-frequency dispersion. Youíll roll down the highway with the best sound you can imagine.

2-ohm nominal impedance

The 2-ohm nominal impedance of the Infinity Kappa 10.11t component tweeters allows compensation for any added resistance in thin factory-speaker wiring and provides increased output when compared to factory speakers or others in its class.

Ultrahigh sensitivity

High sensitivity allows a wide range of power to have positive results without overdriving the audio system. With a sensitivity of 93 decibels at 2.83 volts/1 meter, the Infinity Kappa 10.11t component tweeters achieve excellent volume and musicality with as little as 5 watts RMS. This sensitivity means better performance overall with very moderate power, whether the speakerís using a dedicated amplifier or not. The high sensitivity of the Kappa Series makes it ideal for upgrading a factory systemís existing speakers with very noticeable fidelity improvements.

High-quality passive crossover components

The passive filter components in the crossover network of the Infinity Kappa 10.11t component tweeters use only the best parts, including low-hysteresis polypropylene capacitors, low-loss air core inductors and high-quality resistors. We have engineered them to require minimal parts for the desired filtering, which also means minimizing phase-related anomalies. Overall, the combination results in each Kappa Series speaker having a unique filter arrangement with minimal but very effective parts to achieve true high fidelity, clarity and performance.

I-Mount tweeter-mounting hardware

Infinity Kappa 10.11t component tweeters include the I-Mount tweeter-mounting system, which allows easy flush mounting or surface mounting, giving you more installation options.

General Features:

  • 3/4" Kappa Series Soft Dome Tweeters w/ Crossovers
  • Power Handling:
    • Peak: 150 watts per pair
    • RMS: 5-50 watts per pair
  • 3/4" Soft dome tweeter
  • 2 ohms impedance
  • Frequency Response: 3500-35,000 Hz
  • Flush-mount Depth: 3/4"
  • Sensitivity: 93dB
  • Outboard computer-optimized crossovers included
  • Starfish bracket for mounting in factory tweeter locations
  • Authorized Internet Dealer
  • 3-year Manufacturer's Warranty

Priced Per Pair

Tweeter Specifications

Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
3/4"
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Soft Dome
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
150 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
5-50 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
93 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
3,500 - 35,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
3/4"

Warranty and Return Policy

Parts Warranty Duration
3 years
Labor Warranty Duration
3 years
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.0
Features
5.0
Design
5.0
Usability
5.0
Plextorkid

New Albany, IN

Overall
Durability
Value
Features
Design
Usability
great tweets and stylish

October 21, 2013

I am very impressed with these tweeters not only do they look great they come with the ability to mount with multiple mounts. it makes them extremely versatile and able to be used almost anywhere. I absolutely recommend and would buy these again.

0 of 0 found this helpful

Help our customers find the most helpful reviews

mark

New Albany, IN

Overall
Durability
Value
Features
Design
Usability
Perfect for my application

October 3, 2013

Can't say enough good things about these but I'll try. To start they look great and the quality is top notch. Versatile with many different options for mounting I used the flush mount and they look awesome. Even with entire car amplified except these you can still here the highs from them. I would absolutely recommend and would buy again

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Dynamat 10007 Rubber Roller

Install your Dynamat with ease! This heavy duty rubber roller is designed specifically to install your Dynamat!

Your Price $18.95

Universal Window Handle Remover

Remove your manual windows and door panels with this simple and convenient tool.

Your Price $9.99

Door Panel & Upholstery Remover Tool

Easily remove your door panels and other panels to make the installation of your new tweeters easy.

Your Price $5.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Items we think you might want
XSPTW thumbnail
NVX XSPTW

&bull 260W Max • 130W RMS • 29mm X-Series Car Tweeters • Silk Dome Tweeter Construction • 4 ohms Impedance • Robust Tweeter Chamber • Ring Radiator Design • Improved Clarity and Fidelity

Your Price $99.99

M100-CT-SG-WH thumbnail
JL Audio M100-CT-SG-WH

Marine 1" Treated Silk Dome Tweeters • Sport Grilles Included • Flush-Mount Hardware • Treated to Withstand UV and Salt/Spray Exposure • 12 dB Crossovers • Oversized Neodymium Magnet • Corrosion Resistant

Your Price $139.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

10.11T

UPC

050667368623

Weight

2.00lbs

Internal SKU

1011t

Internal Product ID

60701

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Infinity Kappa 10.11T

  • Infinity Kappa Series Speakers
  • Harman International: The Pursuit of Great Sound
  • Sonic Electronix: The X Factor when Shopping Electronics