Expert Service 1-877-289-7664 [Hours]


Did you know that we price match?

It is important that you always get the best price. Call us at 1-877-289-7664 for our best price on this item or check out our coupons page for great deals!

NVX QBUS8 Open Box

8" Quick Bass Universal System Powered/Amplified Subwoofer System

We apologize

This item has been discontinued

Item Added to Cart

NVX QBUS8 Open Box

8" Quick Bass Universal System Powered/Amplified Subwoofer System


Keep Shopping


Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)



Don't see the accessory you're looking for?
View all available accessories for the NVX QBUS8 Open Box.

Get FAST answers from customers ASK a Question See questions answers

It Takes A Special Kind Of Finesse

This bass unit will add the majestic extra low-end to your music that stock audio systems can't produce. The QBUS8 is an 8" enclosed subwoofer with built-in amplifier that can be added to any factory or aftermarket audio system. The compact design allows the amp and sub combo to fit under most seats or in any trunk and takes up little space. Specializing in tight, accurate and punchy bass, the QBUS8 is an audiophile quality component which is tuned for accurate reproduction of the lower frequencies in your music. If you're looking for a nice complement to bring more depth to your music, the NVX QBUS8 is for you!

General Features:

  • 8" Active Enclosed Low Profile Subwoofer System
  • RMS Power Rating:
    • RMS: 80 watts
  • All weather woven fiber glass woofer cone
  • Adds crisp, clean bass to any system
  • Built-in class AB amplifier
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 45Hz)
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • Heavy duty die-cast aluminum alloy heat-sink for extreme heat dissipation
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity:
    • Level: 110mV-0.5V
  • Variable subsonic filter (20-50 Hz)
  • Variable low-pass filter (50-150 Hz)
  • Phase Shift: 0-180°
  • Frequency response: 20-150 Hz ±1dB
  • 8 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this powered loaded enclosure
  • Dimensions: 9-13/16"W x 13-9/16"L x 2-11/16"H
  • Authorized Internet Dealer
  • 90-Day Manufacturer's Warranty

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
80 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 150 Hz
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Final Wired Impedance
This is the final impedance of the system as the amplifier will see it. If the final impedance is for two sets, it means that the enclosure has two sets of terminals at the listed impedance.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Accessory Tools and Products

Accessories added


Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $53.99

Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

Your Price $97.97

Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

Your Price $109.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number




Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX QBUS8 Open Box