5" x 7" 5-Way AciD Series Coaxial Car Speakers
Product highlights
• 180W Max
• 60W RMS
• 5-Way Coaxial
• 4 ohm Impedance
• Injection Molded Polypropylene Cone
• Rubber Speaker Surround
• Polyetherimide Mid-Range and High-Frequency Tweeters
The FLI AciD series is the perfect budget replacement to your factory speakers. These coaxial speakers are designed to be used in low wattage applications, making them the perfect upgrade to a set of factory speakers. The cone is composed of a molded polypropylene cone material, allowing them to provide articulate music reproduction while still allowing a punch lower end. Multiple polyetherimide supertweeters produce clean highs that your ears will love. The shallow depth of these speakers allows them to be mounted in a variety of vehicles. If you're looking for a low-cost upgrade for your door speakers that will bring the life into your vehicle, the AciD series is your calling card.
Priced Per Pair
Best selling similar products
• 50 watts RMS Each
• 3/4" Silk-Suspended Aluminum Edge Driven Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
(4)
$129.99
List price $129.99
Rockford Fosgate Punch P1 P1683
• 130 watts Peak Each, 65 watts RMS Each
• 3/4" tweeter and 1/2" super tweeter PEI (Polyetherimide) Dome tweeters
• Injection-molded Mineral-filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(85)
$109.99
List price $109.99
• 400 watts RMS Each
• 3/4" Silk Dome swiveling tweeters
• Glass Fiber cone material
• Impedance: 2 ohm
• Sensitivity: 90 dB
$129.99
List price $169.00
• 110 watts Peak Each, 55 watts RMS Each
• 1" Magnesium Dome tweeters
• Tunable waveguide tweeter housing
• Pop Paper-Mica Blend cone material
• Curvilinear cone design geometry
• Impedance: 4 ohm
• Sensitivity: 88.5 dB
$129.99
List price $189.99
• 270 watts Peak Each, 90 watts RMS Each
• 3/4" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 2.63"
(59)
$79.99
List price $95.99
• 300 watts Peak Each, 100 watts RMS Each
• 1" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.59"
(46)
$89.99
List price $107.99
• 400 watts Peak Each, 120 watts RMS Each
• 1-1/8" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
$124.95
List price $124.95
• 225 watts Peak Each, 75 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters with neodymium magnets
• Polypropylene cone material with EVC™ (Extended Voice Coil) technology
• Impedance: 4 ohm
• Sensitivity: 90 dB
(11)
$79.96
List price $119.99
• 360 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
(50)
$79.99
List price $95.99
• 320 watts Peak Each, 80 watts RMS Each
• 1-3/16" Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
$109.00
List price $130.00
Manufacturer:
Model Number:
FA57-F1
Weight:
3.65lbs
Internal SKU:
fa57f1
Internal Product ID:
61431
| 5 star |
|
71% |
| 4 star |
|
29% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great bang for the buck
For the money you cant beat it, had them for about a month now, have 20 rms 50 peak going to them, not 100% sure how loud they get becuase i dont go past 26 out of 50. half way there is about blowing me out of the car. sound is crystal clear the highs and mid's are amazing. Lows are average for a door speaker, but these are not made for bass anyways. Can't go wrong with these.
33 found this helpful
great value
It was a great value and the shipping was very fast
27 found this helpful
BANG for buck
I installed these speakers in a vehicle with a budget-minded sound system. I didn't expect them to perform the way they do. The system has a single 12 handling the bass, so my review is based on my usage (mids/hi). Great sound for the money. Four months of ownership. Would recommend.
20 found this helpful
Good Purchase
Nice sounding speakers, they went in my 1993 F-150 and clarity went up but my JVC can't efficiently push these at higher volumes so I will be buying a 4 channel amp soon. Overall they are pretty solid and have not failed me yet.
19 found this helpful
very well value for the price
I install 2 pairs in my ranger replacing the original speakers. Good decision, they sounds pretty decent for the size. .
17 found this helpful
Pylithean
Fast shipping and very good price Bass A-, Midrange B+, Tweeter B
you cant go wrong with this model very happy sound good in 1992 old ford truck. Put with SOUND STORM F-365 made a super combo setup for under $60.00
16 found this helpful
Exceeded my expectations
I wasn't 100% sure about buying this line, I hadn't heard of Fli Audio but at the price I decided to take a risk, and I'm pleasantly surprised so far. Excellent sound clarity, not as much volume as I would like but I am only powering these with my head unit, still considering getting a speaker amp for these and my front ones. Really clean sound, great price, would highly recommend
17 found this helpful
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(47)
$14.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
(4)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(39)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(51)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(126)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
NVX 25 ft. of True Spec 16 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(57)
$14.99
List price $29.99
Belva 23 ft. of True Spec 16 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(20)
$12.99
List price $24.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(45)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(73)
$11.99
List price $18.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
