Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Pioneer GM-D9601

1200W RMS GM Digital Series Class D Monoblock Amplifier

In Stock
|

List price $280.00

$199.99

with warranty

You Save: $80.01 (28.58%)

Arrives by Thursday, Sept. 25 to zip 98109

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Thu, Sept. 25

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

20% Off XS Power Battery with Purchase of Select Amplifiers!

20% Off XS Power Battery XP950 with Purchase of Select Amplifiers!

26.00

63975

827

Pioneer GM-D9601

$199.99

+

20% OFF

XS Power XP950

$129.99

Special Price $103.99 ($129.99 if purchased separately)

XS Power XP950

• 12-Volt Deep Cycle AGM Power Cell
• Sealed Absorbed Glass Mat (AGM) Design
• Max Amps – 950

50% off NVX 2-Channel RCA Cables w/ purchase!

Save 50% off the NVX XIN25 2-Channel RCA Audio Interconnect cables with your purchase! You will need RCA cables to install your amp! You pay only $5 for a sweet set of RCAs from a premium brand!

4.50

63975

426

Pioneer GM-D9601

$199.99

+

50% OFF

NVX XIN25

$8.99

Special Price $4.49 ($8.99 if purchased separately)

NVX XIN25

• Shielded Coaxial Conductors for Solid Performance • Compact, Stylish RCA Body • Chrome Ends

(Offer 1 of 2)

Combined Total Price

$303.98

You Save $26.00

General Features:

  • GM Digital Series Class D Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 800 watts x 1 chan.
    • 1 ohm: 1200 watts x 1 chan.
  • Max power output: 2400 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
  • Soft start turn-on
  • Mono channel operation
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable low-pass filter (40-240 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 10-240 Hz
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 12-3/8"W x 7-7/8"D x 2-3/8"H
  • 1-year Sonic Electronix Warranty

Product History:

Pioneer GM-D9601 thumbnail
(newest, current model)
Pioneer GM-D8500M thumbnail
(previous model, replaced by Pioneer GM-D9601)
Pioneer GM-D8400M thumbnail
(previous model, replaced by Pioneer GM-D8500M)

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
500 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
800 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1200 watts x 1 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.
2400 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
GM Digital (Pioneer)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

2400 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1200 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.05%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 240 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
30A x 2 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
86%
4 Star
14%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.9
Features
4.6
Design
4.8
Usability
4.8
Matthew T Anderson

Fredericksburg, VA

Overall
Durability
Value
Features
Design
Usability
Great price, true power, looks awesome!

July 10, 2013

Never really followed pioneer for anything other then headunits till now. My system has been built up over two years of buying stuff and selling stuff from it. I blew an old Sony 800W Max amp running a 2011 Rockford Fosgate P2 and was looking for a new amp that wouldn't break the bank and didn't fake the ratings, which is hard to do especially for the common folk. I'm not new to systems, built mine with no planning and learned from trial and error. I accidentally came across this amp while bored, searching for a new amp while I had a custom box built. What interested me the most was it was 1ohm stable and my current setup could be ran at 1ohm. Asked a few trusted audio friends and they said to go for it. Bought it the next day, shipping was quick, and the product looked great besides the cheesy looking packaging. Cracked it open, had some beefy components and even the fuses match up to the stated 1200rms rating they give you. Installed it once the new box was built. At the time it was wired to 1ohm, on a P2 that had a 400rms power rating, with 10awg CCA wire. Everything ran awesome, amp never heated up, and the sub eventually gave up a few months later. Went ahead and bought my dream sub a Rockford Fosgate T1D412 . Installed that to 1ohm and the same previous setup. Sounded absolutely amazing untuned for 15 seconds. Amp did a great job of recognizing the resistance from my cheap CCA power wires and went into protect so it wouldn't over heat the amp. Eventually ordered Cadence 4G150MP-B wire, installed that. I was shaking the Glasses rack at my local 7-Eleven. Thanks to the bass boost knob, I'm able to listen to it comfortably and turn it up for demos and laughs. Eventually though I started to smell burning plastic coming from the trunk after long periods of use. Come to find out, it wasn't my coils cooking, it was my wire terminal in the back of the sub box melting cause I had 16awg while from amp to the sub. Just ordered a new terminal and 8awg Cadence wires to fix that issue. All in all guys, the sub has only gotten hot cause of my cheap wires and protected itself from disaster just like a good amp should. Looks awesome, stays cool, easy to use, and this amp has been tested to put out 1200+rms all for $169. Can't beat that decision. Feel free to look me up if you want info on the setup, will be tested, and tuned after new wires are ran.

2 of 2 found this helpful

Help our customers find the most helpful reviews

truthsayer

wichita, ks

Overall
Durability
Value
Features
Design
Usability
OUTSTANDING

December 6, 2012

WOW, this amp is unbelieveable. slams my two sa-12's. And by the way they have the fuse rateing on the description wrong. it has 3 (40amp) fuses. anyway ive spent a fortune on numerous amps always trying to find the best for value. this is by far the best, so clean, stays cool, and the price is unbelieveable. I would not own any other pioneer products, but when it comes to the gmd amps they realy know what their doing. By the the way mine tests out at 1268 rms @ 1 ohm.

2 of 2 found this helpful

Help our customers find the most helpful reviews

Frederick

Maryland

Overall
Durability
Value
Features
Design
Usability
Great price hits hard

September 17, 2013

Great price hits very hard I hooked it up to my 15 inch L7 and it shakes everything!

1 of 1 found this helpful

Help our customers find the most helpful reviews

Brandan

Canada

Overall
Durability
Value
Features
Design
Usability
Amazing Amp

June 17, 2013

amazing amp slamms my 2 10" jbl. can't use my rear view mirror with all the bass. has great sound quality.

1 of 1 found this helpful

Help our customers find the most helpful reviews

Cortez

Ga 2 Sc

Overall
Durability
Value
Features
Design
Usability
This Amp Hits Harder Than I Would have Believed

March 9, 2013

From me to you, hurry up and buy. You best believe you'll feel that raw bass so strong I thought I was having an outer body experience getting out of my car, I mean my whole body was just numb I have the Fosgate P3 2/12 & I feel so sorry 4 my subs cause this amp is beating them with all kinds of abuse

1 of 1 found this helpful

Help our customers find the most helpful reviews

nismos14

Edison, NJ

Overall
Durability
Value
Features
Design
Usability
Best value and performance combo

February 11, 2013

This amp is hard to beat at this price point. With it's combination of raw power, good looks, and running cool I can't think of a better amp then this one. I really am pleased with it's performance. I would definitely suggest this amp to anyone looking for an amp that is versatile and runs cool.

1 of 1 found this helpful

Help our customers find the most helpful reviews

Tomi

Canada

Overall
Durability
Value
Features
Design
Usability
Amazing little amp for the price!

August 12, 2014

I have had this amp officially hooked up for about 45days now and its a really well built amp that delivers incredible sound quality and power to any sort of subwoofer. I'm currently running Dual Phoenix Gold x10d2's rated at 450rms a piece, and they bump hard! Im running 1/0g knu wire from battery into a fused distrubution block with dual 4g nvx wire into 2 amps on a 130a alt, it sounds amazing! Overall i would recommend the amp to anyone as its small, easy to hide, and stays cool even when run for hours on end cranked.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Edtotheward

Dallas, Tx

Overall
Durability
Value
Features
Design
Usability
It's Amazing

July 3, 2014

To begin with, I love Pioneer. It's great quality and bangs for the buck. It's a little pricey but very much worth the money. I like how the amp is warm and not burning hot while running, therefore the amp is efficient & so far I'm loving this amp. Thumbs up

0 of 0 found this helpful

Help our customers find the most helpful reviews

Liam

Hinesville, GA

Overall
Durability
Value
Features
Design
Usability
Solid performer

April 4, 2014

For the price level this amp is in, it works great. I currently have it hooked to two Dual 12" subs, it does not disappoint. Not a good amp for most DVC subs as you lose upper lows....

0 of 0 found this helpful

Help our customers find the most helpful reviews

Chris

new york

Overall
Durability
Value
Features
Design
Usability
pioneer gm d9601

April 2, 2014

I purchased this amp to push 2 NVX NSW 12'S @ 4ohms I have to say I'm impressed. I have a pioneer head unit and have owned numerous pioneer products, they have never failed me.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jack

phoenix, AZ

Overall
Durability
Value
Features
Design
Usability
good amp

March 23, 2014

This is a pretty good amp that does what it says, i would recommend running it no lower than 2ohms if you want power. Even at 2 ohms bumping it hard for 30min-1hr it barely gets warm and its underneath a seat. If you are having problems with your bass knob make sure you plug in the wire and the knob from pioneer, i thought i could get away with leaving my old bass knob from my previous amp in there and even the pioneer knob would not work with the old wire plugged into the amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

james

fitzgerald, GA

Overall
Durability
Value
Features
Design
Usability
Good GM-D9601

March 21, 2014

Great amp for the price. I was surprised at the size of the amp, but it put out a lot of power.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tvong

Houston, tx

Overall
Durability
Value
Features
Design
Usability
Good amp!

March 20, 2014

This is my second purchase of the same amp. Pushing 2 12's at 1 ohms good. Except sometimes it can get really hot and won't bass as hard. It's a good size amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Audiophile 2.0

Michigan

Overall
Durability
Value
Features
Design
Usability
Good but....

March 8, 2014

Everything seems great as far as the amp goes,it looks nice and seems to run my subs more efficintly than my alpine mrp-500 did. I use two jl 12w1-v3 good for 300rms a peice. The thing is...the bass control knob doesnt do ANYTHING, no decernable difference between max and minimum. That was one of the reasons i bought this amp. Maybe i got a defctive bass knob? Im sure they would want me to return the whole amp and that seems like a hassle when my head unit can still do the same function. Other than the bass knob its a great amp.As a side note, its MUCH cheaper here on sonix than anywhere else.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Plum

Albuquerque

Overall
Durability
Value
Features
Design
Usability
Great Amp For The Price

January 15, 2014

I have this amp powering 2 Rockford P2's at 2ohms. They slap pretty hard. This amp runs extremely cool. I bump the subs and amp all night and it barely gets warm. The only problem I have had so far is the bass knob doesn't really work. Not sure if I just got a bad bass knob or what. When I turn the knob itself it doesn't really do much at all. Although when I pull the knob out of the amp the bass REALLY goes down. So I just keep it plugged in and it sounds great. Overall great amp for the price.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ben

Anaheim, CA

Overall
Durability
Value
Features
Design
Usability
EXCELLENT AMP...

January 9, 2014

This is my first Pioneer brand amp, I have owned Kenwood, Kicker Hifonics amps & this model amp is the same or better than them. I have it powering a 10" NVX VCW-104 in a ported enclosure & it's deep & loud. Love the size of it, fits perfect under the seats or on the back of rear fold down seats (That's were I have it in my car). The only bad thing I have to say about this amp is that the bass knob did not work when I did the install. I could have returned it but I did not want to go through a long wait time for a new replacement, so the good thing was that I had an extra PAC LC1 knob & connected that instead, so now I could adjust the bass when I need to. Overall its a great amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Angel

La Villa, TX

Overall
Durability
Value
Features
Design
Usability
Awesome amp!

November 29, 2013

This amp works great and the price is good too. I paired this amp with two 12" Pioneer 2 ohm subs model number Pioneer TS-W309D2. They work great together! I installed it in my 2011 Mustang GT with the factory radio. I used the line out feature of the amp and connected the remote wire to the factory antennae. It sounds and works awesome! The only negative is that the remote bass boost remote raises the bass when it is connected, but does not seem to lower it with the dial. Other than that, I am happy with it!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Gordon

Canada

Overall
Durability
Value
Features
Design
Usability
Excellent purchase

November 24, 2013

This amp works perfect! Satisfied with the purchase. Good clarity, heavy bass, if you want the extreme Power of pioneer this is the way to go. I took the amp out for the winter, needed the Alan key to Remove the wires from the amp because of the solid connection.

0 of 0 found this helpful

Help our customers find the most helpful reviews

wolfpup

ocala, fl

Overall
Durability
Value
Features
Design
Usability
Pioneer GM-9601

November 23, 2013

This product is amazing! The amp gives more power then what it's rated at and I had my Pioneer GM-9601 bench tested at 14.4 v it was pushing out 1503 watts. I was really happy and then I installed it on 4 10's in my single cab f150 and it rocks out the bass is clear and very powerful. a must buy. I have been doing car audio for a long time for almost 19 year and pioneer has delivered the best work so far.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Shawn

Rochester, NY

Overall
Durability
Value
Features
Design
Usability
great amp,and good value

November 6, 2013

i would recommend this product to anyone. I bought this amp to go along with my 2 pioneer champion pro series subs and everything sounds sweet.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $69.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $64.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $59.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

StreetWires FB0

1/0 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $18.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
becuase it was a nice amplifier for a sa12d4
eddie J on Aug 5, 2014

Product Summary

Manufacturer

Model Number

GM-D9601

UPC

884938193191

Weight

8.60lbs

Internal SKU

gmd9601

Internal Product ID

63975

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pioneer GM-D9601