Expert Service 1-661-257-9993 [Hours]

Kicker 06S15L74

4 ohms DVC 15" L7 Solo-Baric Subwoofer S15L7 S15L74

Discontinued
|

This item has been discontinued and
is no longer available

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

08s15l74 thumbnail

Kicker Solo-Baric S15L74 (08S15L74)

OUR PRICE: $416.66

View item

Item Added to Cart

Kicker 06S15L74

4 ohms DVC 15" L7 Solo-Baric Subwoofer S15L7 S15L74

$209.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$26.99
Add Warranty
3 years of protection

Atrend 15KD Subwoofer Enclosure

Sealed Enclosure for Kicker L5 and L7 Subwoofers

$94.95

Add
NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

$29.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Kicker 06S15L74.

Get FAST answers from customers ASK a Question See questions answers

  • 15" DVC L7 Series Subwoofer
  • Power Handling:
    • Peak: 2000 watts
    • RMS: 1000 watts
  • Aluminum deposit cone woofer
  • Santoprene rubber surround
  • Rear-cone brace for added strength to reduce cone flex
  • Massive surround radius provides increased excursion for low bass output and higher SPL
  • BAM (Basket and Motor) Enhanced Assembly
  • Perimeter venting which relieves pressure for a more linear response
  • Patent Pending Stitched Surround that aids in preventing cone/surround separation at high excursions
  • Sleeved high-power tinsel lead wires to resist lead breakage
  • Spring-loaded nickel plated terminals for solid connections with large gauge speaker wire
  • 1-year Manufacturer's warranty

Product History:

Kicker 11S15L74 thumbnail
(newest, current model)
Kicker 08S15L74 thumbnail
(previous model, replaced by Kicker Solo-Baric S15L74 (11S15L74))
Kicker 06S15L74 thumbnail
(previous model, replaced by Kicker Solo-Baric S15L74 (08S15L74))
Kicker 04S15L74 thumbnail
(previous model, replaced by Kicker 06S15L74)
Kicker S15L74 thumbnail
(previous model, replaced by Kicker 04S15L74)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
15"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
2000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
18 - 100 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
89.4 dB
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Square
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Dark Gray
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Aluminum
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
Optional (Accessory required and sold separately)
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
8-1/2"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
14-1/16"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
4.7
Usability
5.0
casey

Benton, AR

Overall
Durability
Value
Features
Design
Usability
kicker rocks

March 1, 2006

I have this sub connected to a 2006 Hifonics 1606 Brutus class D amp with 1100watts RMS running in one channel and wired at 2 ohms. It hits so hard my teeth shake. The new color is cool and matches the amp. To put it in the words of one man "obnoxoiusly loud".

7 of 8 found this helpful

Was this review helpful to you?

anthony

River Grove, IL

Overall
Durability
Value
Features
Design
Usability
Wangin'!!!!

July 10, 2008

I know someone who has 2 of these in a vented enclosure. you can hear him comin from 6 blocks away...more if its like 2am.

6 of 7 found this helpful

Was this review helpful to you?

John

El Dorado Hills, CA

Overall
Durability
Value
Features
Design
Usability
BOOOM

July 9, 2008

Ok so me and a friend got into a bit of a competition dealing with subs and he ended up getting two 15s to beat out my 2 12s. i of course couldn't stand this so i went out looking for a better set of subs. i came upon these babies. Once i had gotten one amp hooked up to one of these Kickers i took it over to my friends house and it turned out to be louder than both his 15s thats what i call boom. I have the sub wired down to a 2 ohm load and powered by a sony amp providing 900 watts rms and this thing just shakes my car to pieces and makes people glare at me.

5 of 6 found this helpful

Was this review helpful to you?

Drew

Danville, IL

Overall
Durability
Value
Features
Design
Usability
AWESOME

May 24, 2011

I have this thing hooked up to an MA Audio 1800 watt comp amp and I can't play it with my windows up or I'm afraid I'll blow my window seals. Definitely recommend if you can afford it. Sounds and looks great.

4 of 5 found this helpful

Was this review helpful to you?

boss

phx az

Overall
Durability
Value
Features
Design
Usability
whit a boom boom boom

April 25, 2009

i have a 2000 chevy.. with three 15 L7 kickers hooked up to 2 planet audio 2200 watts now that's bass baby. im telling you now it broke my rear windshield and i have been pulled over 3 times by the popo for... and i quote.. extremely loud music....

3 of 4 found this helpful

Was this review helpful to you?

brian

gilbert, AZ

Overall
Durability
Value
Features
Design
Usability
Amazing!!

March 2, 2007

I have 2 of these hooked up to 2 power acoustik 2000w amps and it hits extremely hard!!! Well worth the buy!!

3 of 4 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Atrend 15KD Subwoofer Enclosure

Sealed Enclosure for Kicker L5 and L7 Subwoofers

Your Price $94.95

Atrend 15KDV Subwoofer Enclosure

Vented Enclosure for Kicker L5 and L7 Subwoofers

Your Price $99.99

Atrend 15KS Subwoofer Enclosure

Sealed Enclosure for Kicker L5 and L7 Subwoofers

Your Price $59.99

Atrend 15KSV Subwoofer Enclosure

Vented Enclosure for Kicker L5 and L7 Subwoofers

Your Price $99.99

Atrend 15SQKV Subwoofer Enclosure

Vented Enclosure for Kicker L5 and L7 Subwoofers

Your Price $64.99

NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

Your Price $29.99

20 Ft. of Kicker 12 Gauge Speaker Wire

Get true gauge Kicker speaker wire to match your Kicker subwoofer!

Your Price $39.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $97.99

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $88.86

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $94.95

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $7.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Kicker 08GL715

15" Speaker Grille for Kicker Subwoofers

Your Price $39.95

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Kicker 06S15L74 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Kicker 06S15L74 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 Kicker 06S15L74 Subwoofers

Mono Amp

4 Channel Amp

4 Kicker 06S15L74 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

06S15L74

UPC

713034025641

Weight

36.45lbs

Internal SKU

06s15l74

Internal Product ID

6398

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker 06S15L74