Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Pioneer TS-A1305C

5-1/4" 2-Way A-Series Component Car Speaker System

In Stock
|

List price $145.00

$64.95

with warranty

You Save: $80.05 (55.21%)

Arrives by Friday, Aug. 1 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Fri, Aug. 1

Bundled Savings with this Product

=

Save 25% on a Install Tool Kit!

Save 25% off on the Scosche TK12 install tool kit with your purchase! This kit includes a voltage test light, wire stripper and many other tools you need to install your system!

3.25

63996

500

Pioneer TS-A1305C

$64.95

+

25% OFF

Scosche TK12

$12.99

Special Price $9.74 ($12.99 if purchased separately)

Scosche TK12

12V Car Stereo Installation Kit • Includes Wire Stripper/Cutter, Screwdriver, RCA Cable Runner, Panel Removal Tool, Test Light, and other Installtion Accessories • Perfect for Installing a First Car Stereo

(Offer 1 of 1)

Combined Total Price

$74.69

You Save $3.25

Quality Sound by Pioneer

The A-Series speakers are your solution to upgrading those worn out factory speakers. The cone is composed of a multilayer mica matrix material that is rigid enough to resist warping during playback, but soft enough to produce smooth and subtle mids. The soft dome tweeter uses Wave Guide technology in order to increase the sensitivity, thus providing great articulation in the high frequency spectrum. The passive crossover network will blend the mid-woofer and tweeter for a perfectly balanced sound all throughout the audible frequency range. These speakers are designed with a wide frequency response to ensure you are hearing every note of your favorite songs. The high temperature voice coil will reduce distortion by dissipating heat quickly, which will protect your investment for years to come. These speakers can be ran off either a head-unit or an amplifier, making them very versatile and applicable for most vehicles. Available in most common sizes, the A-Series speakers make for a great audio upgrade.

General Features:

  • 5-1/4" A-Series 2-Way Component System
  • Power Handling:
    • Peak: 300 watts per set / 150 watts each side
    • RMS: 100 watts per set / 50 watts each side
  • Multilayer Mica Matrix cone material
  • Elastic Polymer speaker surround
  • Soft Dome tweeter with Wave Guide for increased sensitivity
  • High temperature voice coil
  • Passive crossover network included
  • 4 ohms impedance
  • Protective speaker grilles
  • Frequency response: 48-32,000 Hz
  • Top-mount depth: 2-1/8"
  • Sensitivity: 89dB
  • 1-year Sonic Electronix Warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Product History:

Pioneer TS-A1305C thumbnail
(newest, current model)
Pioneer TS-A1304C thumbnail
(previous model, replaced by Pioneer TS-A1305C)
Pioneer TS-A1302C thumbnail
(previous model, replaced by Pioneer TS-A1304C)

Speaker Specifications

Series
This is the manufacturer product line of speakers.
A-Series / TSA (Pioneer)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
5-1/4"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
3/4"
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mica Reinforced Cellular Glass-Fiber
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Elastic Polymer
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
150 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
50 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
89 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
48 - 32000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/8"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-1/4"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
4-3/4" x 4-3/4" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
On Sale

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.7
Features
5.0
Design
5.0
Usability
5.0

Peter

Hanford, CA

Overall
Durability
Value
Features
Design
Usability

excellent choice

April 9, 2014

sounds clean and full. Works well on my 2006 dodge ram to replace the stock.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ron

Wabasso, FL

Overall
Durability
Value
Features
Design
Usability

Great Speakers!! Great Value!!

April 4, 2014

I got these speakers to replace my stock speakers in my 2001 buick lesabre and these are very very good. I have them hooked up to an hifonics amp and they are very loud. I would recommend these components to anybody who is looking for a great quality product that is at a good price.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Plano

Overall
Durability
Value
Features
Design
Usability

Best Speakers Out There for the $$$

July 21, 2013

Put these in the Wrx & matching Pioneer model door speakers w/2 amps & 2-12"s. They're powered by a Gorilla 400 watt amp (IIRC). Couldn't be happier. Sounds are amazing!!!!! No cons/problems/beef whatsoever!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 50 ft. of True Spec 16 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $29.99

Belva 23 ft. of True Spec 16 Gauge Speaker Wire

100% Copper Clad Aluminum, PVC blended jacket for easy installation and high strand count for maximum audio quality

Your Price $12.99

16-14 AWG Butt Connectors

These blue butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers!

Your Price $4.99

16-14 AWG Blue T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

16-14 AWG Quick Disconnect Connectors

These blue quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $7.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

5" to 5-1/4" Round Foam Speaker Baffles

Creates a tight, acoustic seal behind the speaker to enhance the sound quality.

Your Price $8.99

Product Summary

Manufacturer

Model Number

TS-A1305C

UPC

884938187398

Weight

3.85lbs

Internal SKU

tsa1305c

Internal Product ID

63996

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pioneer TS-A1305C

  • Pioneer A-Series Speakers
  • Sonic Electronix: The X Factor when Shopping Electronics