Expert Service 1-877-289-7664 [Hours]

Kicker 40CS684

6" x 8" 2-Way CS Series Coaxial Car Speakers

List price $79.95

$69.95

with warranty

You Save: $10.00 (12.51%)

Arrives by Friday, Sept. 5 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Fri, Sept. 5

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • 6" x 8" CS Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 450 watts per pair / 225 watts each
    • RMS: 150 watts per pair / 75 watts each
  • Polypropylene cone material
  • Durable, Ribbed UV-Treated Polyester Foam speaker surround for precise linear excursion
  • Lightweight 1/2" Polyetherimide (PEI) Balanced Dome tweeter design for superb clariy
  • Neodymium tweeter magnet motor structure
  • EVC (Extended Voice Coil) technology for high thermal handling
  • Shallow mounting design allows fitment into virtually any vehicle
  • Substantial upgrade from factory speakers
  • 4 ohms impedance
  • Frequency response: 45-20,000 Hz
  • Top-mount depth: 2-3/16"
  • Sensitivity: 90dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

2011 Kicker Authorized Online Dealer and eBay Seller

Speaker Specifications

Series
This is the manufacturer product line of speakers.
CS (Kicker)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 8"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1/2"
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

PEI (Polyetherimide)
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Polyester Foam
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
225 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
75 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
45 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-3/16"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-9/16"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5" x 7-3/16 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Accessory Tools and Products

Accessories added

20 Ft. of 12 Gauge AWG Q-Series Speaker Wire

20 Feet of true gauge Kicker speaker wire.

Your Price $34.95

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

40CS684

UPC

713034064282

Weight

4.50lbs

Internal SKU

40cs684

Internal Product ID

64182

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker 40CS684

  • Kicker CS Series Car Audio Speakers
  • Sonic Electronix: The X Factor when Shopping Electronics