See all parts that fit your 1983 Caballero
Quad MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input & Two 4/8 Gauge Output
Product highlights
• Quad Mini-ANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Outputs
• Solid Brass Construction For Better Power Transfer
• Water Resistant Housing
• Fuse Type: Fuse Type: MANL
• Proprietary Black Coating
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
150W Peak (50W RMS) 3.5" Apex Series 2-Way Coaxial 4-ohm Car Speakers
$79.99
320W Peak (80W RMS) 4x10" Performance Series 2-Way Coaxial 4-ohm Car Speakers
$99.00
List price $180.00
460W Peak (100W RMS) 4” A Series 2-way 4-ohm Coaxial Car Speakers
$90.00
List price $110.00
270W Peak (90W RMS) 4" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$90.00
List price $99.99
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
420W Peak (140W RMS) 4x10" Vega Series 2-Way Coaxial 4-ohm Speakers
$99.99
List price $119.99
180W Peak (60W RMS) 3.5” CS Series 2 Way Coaxial 4-ohm Speakers
$51.96
List price $74.99
Fusing an aftermarket car stereo system provides protection for your car and your car stereo. No fuse system provides better protection than T-Spec. The new T-Spec compact brass designs are constructed from solid brass and are smaller than anything else in the industry. This combination of top quality materials and thoughtful design provides an incredibly reliable and simple to install product that will last for years. |
 |
Best selling similar products
HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish
(31)
$16.99
List price $39.00
• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(40)
$23.99
List price $49.00
• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$33.99
List price $69.00
• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block
(1)
$45.00
List price $45.00
• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(21)
$14.99
List price $29.00
• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$28.99
List price $49.00
• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations
$49.00
List price $69.00
• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base
$69.99
List price $69.99
• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
(3)
$56.99
List price $63.99
• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs
(3)
$36.00
List price $36.00
Manufacturer:
Model Number:
VFDB4-2
Weight:
0.60lbs
Internal SKU:
v12fdb148m
Internal Product ID:
68295
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great Fuse Block
Solid Fuse Block. Worked exactly as advertised and is a great value for the money.
Verified purchase
3 found this helpful
Tight!
I've used these for three system builds, now and don't see a better product on the market for its intended use. Since most amps and many EQs, Active Crossovers, DSPs, etc. are usually placed in the middle or rear of the vehicle and the batteries are often under the hood, fusing just after the battery and just before the component is necessary if you care to protect your equipment. And, if you have multiple components (EQ/DSP, Active Crossover, Amps, etc.) its best to run a large gauge main power feed to the vicinity of such equipment and then distribute it locally. Different components will require different amperages - with a fused distribution block, you can install appropriately rated fuses for each component, all in one small block. It keeps installs solid, neat/clean and is very cost effective.
1 found this helpful
4-Channel, Professional UHF Wireless Microphone System
(2)
$449.00
List price $629.00
6" x 8" 2-way KS Series Speakers (also mounts in most 5" x 7" locations)
(20)
$79.95
List price $119.95
Power Acoustik NX-5 (2 Tweeters per box)
400W Peak (200W RMS) Pair of 1" NX Series Pro Audio Titanium Bullet Horn Tweeters
(5)
$79.95
List price $79.95
MTX RTX108 (Sold Individually)
500W Peak (250W RMS) 10" RoadThunder Extreme Series 2-way Coaxial Car Speakers
(3)
$109.95
List price $99.95
3.5" 2-Way Grand Touring Series Custom-Fit Coaxial Car Speakers
(7)
$49.99
List price $139.95
2400W RMS Monoblock X-Power Series Class D Car Amplifier
(3)
$499.95
List price $749.95
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
