ANL Fuse Holder with 1/0 Gauge Input and Output
Product highlights
• ANL Fuse Holder with 1/0 Gauge Input and Output
• Lock-Nut Style Fasteners
• Ultra-Flexible PVC Blended Jacket
• High Tolerance Compact Molded ABS
• Water Resistant
Fusing an aftermarket car stereo system provides protection for your car and your car stereo. No fuse system provides better protection than T-Spec. The new T-Spec compact brass designs are constructed from solid brass and are smaller than anything else in the industry. This combination of top quality materials and thoughtful design provides an incredibly reliable and simple to install product that will last for years.
 |
Best selling similar products
• ANL/Mini-ANL Fuse Holder
• One 1/0 - 4 Gauge Input
• One 1/0 - 4 Gauge Output
• Solid Brass And Satin Chrome Plated
• High-Temperature Polycarbonate Base And Cover
(50)
$12.99
List price $24.99
2 Pack of 300 Amp Nickel-Plated ANL Fuse (Belva BANL300)
• 300A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction
(19)
$3.99
List price $7.99
2 Pack of 200 Amp Nickel-Plated ANL Fuse (Belva BANL200)
• 200A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction
(22)
$3.99
List price $7.99
4 Pack of 80 Amp Nickel-Plated MANL Fuse (Belva BMANL80)
• 80A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction
(19)
$3.99
List price $8.99
4 Pack of 150 Amp Nickel-Plated MANL Fuse (Belva BMANL150)
• 150A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction
(11)
$3.99
List price $8.99
2 Pack of 150 Amp Nickel-Plated ANL Fuse (Belva BANL150)
• 150A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction
(13)
$3.99
List price $7.99
4 Pack of 100 Amp Nickel-Plated MANL Fuse (Belva BMANL100)
• 100A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction
(17)
$3.99
List price $8.99
2 Pack of 100 Amp Nickel-Plated ANL Fuse (Belva BANL100)
• 100A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction
(8)
$3.99
List price $7.99
4 Pack of 125 Amp Nickel-Plated MANL Fuse (Belva BMANL125)
• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction
(12)
$3.99
List price $8.99
• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer
(4)
$14.99
List price $59.99
Manufacturer:
Model Number:
VANL
Weight:
0.59lbs
Internal SKU:
v8anl
Internal Product ID:
68366
| 5 star |
|
67% |
| 4 star |
|
17% |
| 3 star |
|
17% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Melted
Had this for about 2 months. Not sure when it melted, but it was pretty bad. It was a little close to the engine, but still. Dangerous
44 found this helpful
Ok
Pros it looks cool works fine.
Cons its really hard to get the wire to stay tight.
40 found this helpful
Good quality
I used this zero gauge fuse holder going to a t spec distribution block, it is a little difficult to install the cable into the fuse holder because it has a compression fitting but once you get it installed , it holds very good
Verified purchase
32 found this helpful
Awesome!
This is a lock but termination, you strip 5/8 inch wire insert it then fold excess over bevel of lock but, then insert it into fuse holder side, tighten with box or cresent wrench
This holds tighter than a set screw and looks way better than a soldered or crimped ring terminal
Connection so tight you can hang from it
31 found this helpful
Works Great!
Works Great! It does exactly what it says it does! Would recommend.
Verified purchase
29 found this helpful
Protect your Gear!
You spend hundreds, if not thousands of dollars on your sound system and thousands (hopefully not hundreds) on you ride - Why risk it all on skimping on an eleven dollar fuse holder and a one dollar fuse? The purpose of an in-line fuse is to protect against shorts in your wiring. If you are running a high power system (any power system, for that matter) through a fat cable (any cable) back to your amps and over time it vibrates against an edge of metal and wears through the insulation, you will develop a short. Basically, you will ground out your power wire. Doing so can drain your battery (best case) and creates a lot of heat which could start your ride on fire. At that point, 12 bucks seems like cheap insurance. Buy it, install it within 18 inches of your battery, and sleep well - or rock out all night. These are reasonably priced, do their job well, and are easy to install.
Verified purchase
28 found this helpful
1-way Car Alarm, Keyless Entry, Remote Start Vehicle Security System w/ 2 Remote Transmitters
$49.99
List price $249.99
Single DIN Installation Dash Kit for Select 2004-2007 Scion Vehicles
(14)
$8.99
List price $17.95
Monster Cable MPC P200 PFD 34A
4-way AGU Fused Power Distribution Block (Three 4 Gauge Inputs and Four 8 Gauge Outputs)
$29.95
List price $49.95
Cook Pro 242 5qt Stainless Steel Colander w/ Oversized Handles
$14.99
List price $28.00
Universal Cream Headrest Pillow with Preloaded 10" TFT-LCD Monitor Included (COM1008IR Cream)
$139.99
List price $349.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
