Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
625W RMS Class AB Single Channel Monoblock Chaos Exxtreme Series Amplifier
• RMS: 500W x 1 @ 4 ohms, 625W x 1 @ 2 ohms
• Total Peak Power: 1250W
• Wired Bass Remote Included
• Bass Boost 0-18 dB at 50 Hz
• Speaker Level Inputs
• Dimensions: 11"W x 10-5/8"L x 2-7/8"H
• RMS: 500W x 1 @ 4 ohms, 625W x 1 @ 2 ohms
• Total Peak Power: 1250W
• Wired Bass Remote Included
• Bass Boost 0-18 dB at 50 Hz
• Speaker Level Inputs
• Dimensions: 11"W x 10-5/8"L x 2-7/8"H
Internal Product ID:
68539
5 star |
|
67% |
4 star |
|
33% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
5 |
Value |
|
5 |
Features |
|
4.7 |
Design |
|
5 |
Usability |
|
5 |
great for lower powered systems
I have it hooked up to a Lanzar Opti Scion 15 dvc and it knocks pretty good. The sub was in a ported box and it was too loud with the gain turned up 1\2 way. Put the sub in a sealed box and all of a sudden, I had great musical bass. But, distortion was way too much. Hooked up the bass remote and it was much better with less distortion. However, there was still to much distortion. I upgrade all of my power and speaker wires to ofc copper and the distortion is almost gone. The gain is up to 3\4 right now and it's hitting like a 15 should hit. I also added 12 oz of poly fill to the box and it helped more than I thought it would. Sonic is correct when they recommend the higher quality wires. The accessories make all of the difference. Great little amp and BOSS offers a great value compared to the other brands out there :)
19
found this helpful.Great amp for the money
This amp is awesome by so far. I have it plugged into a Sony Xplod 10 inch sub and works great.
16
found this helpful.great value
I would recomend this product for the novice and for a wory free install. I currently have this installed with a low level pic up which works quite well and drives my sub hard. My only complaint is that the bass boost is only on or off, on +15 off zero... I would have liked it to have a dial instead... Other from that, it is a great solution for the hobbyists. not suitable for comp setups!
17
found this helpful.Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(38)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
(2)
$399.99
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier
(10)
$399.96
• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier
(6)
$99.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
Add a 2-Channel amp without replacing your factory radio
80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
680 Amp SPP Series Dry Cell Battery with Protective Steel Case
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing