Garage
Shop

Jensen POWER1500.5D

760W RMS Power Series 5-Channel Class D Car Amplifier (POWER 1500.5D)

Jensen
Shop all Jensen
Product videos
highlight-star-icon

• Full-Range RMS: 60W x 4 @ 4 ohms, 90W x 4 @ 2 ohms
• Subwoofer RMS: 230W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Wired Bass Remote Included
• Class D Circuitry
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 8-1/8"W x 12-13/16"L x 2"H

Learn more about the power15005d

We apologize

This item has been discontinued

Product Highlights


• Full-Range RMS: 60W x 4 @ 4 ohms, 90W x 4 @ 2 ohms
• Subwoofer RMS: 230W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Wired Bass Remote Included
• Class D Circuitry
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 8-1/8"W x 12-13/16"L x 2"H

Description


Jensen brand icon

Authorized dealer

General Features:

  • Power Series 5-Channel Class D Car Amplifier
  • Channel 1-4 RMS Power Rating:
    • 4 ohms: 60 watts x 4 chan.
    • 2 ohms: 90 watts x 4 chan.
  • Subwoofer Channel RMS Power Rating:
    • 4 ohms: 230 watts x 1 chan.
    • 2 ohms: 400 watts x 1 chan.
  • RMS power output: 760 watts total
  • High Current Pulse Width Modulated MOSFET power supply and Output Transistors
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
  • Soft start turn-on
  • 5/4/3/2 or Mono channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity:
    • Level: 400mV-5V
  • Variable high-pass filter (16-160 Hz)
  • Variable low-pass filter (Sub Channel Only: 30-160 Hz)
  • Subwoofer infra-sonic filter: continuously variable 16-60 Hz
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 8-1/8"W x 12-13/16"L x 2"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
60 watts x 4 channel
RMS Power @ 2 ohms
90 watts x 4 channel
Bridged RMS Power
190 watts x 2 channel
Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
230 watts x 1 channel
RMS Power @ 2 ohms
400 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
5-Channel
Total Peak Power Output
1500 watts
Total RMS Power Output
760 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
0.02%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
16 - 160 Hz
Low-Pass Crossover Frequency
30 - 160 Hz
Signal-to-Noise Ratio
100 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fuse Rating
30A x 2 
Strappable
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

POWER1500.5D

Weight:

8.00lbs

Internal SKU:

power15005d

Internal Product ID:

69681

Product and How-to Videos


  • Jensen Power Series Amplifier
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
54%
4 star
23%
3 star
15%
2 star
0%
1 star
8%



Durability
4.3
Value
4.6
Features
4.3
Design
4.2
Usability
4.3

Customer Reviews

Sort by:

Loading...

Very Happy with this (CEA-Compliant) amp

I bought this amp over 5 months ago and its still strong.

01 jeep grand Cherokee
HU: ★ Pioneer DEH-P8400BH
Powered by Jensen POWER1500.5D 760W RMS Power Series 5-Channel Class D Car Amplifier running CL-69SUB/CF - CDT Audio 6"x9" in front doors Wired in parallel to sub channel pushin (CEA 170W) to each, sounds/feels excellent.

I also added a pair of CDT Audio HD 6EX.2 (2 Ohm version) 6.5" coaxial 2-way speaker system to the rear doors (CEA 87W each) WHAT A COMBINATION, Polk db351 3.5" in the dash wired parallel to Polk db1001 Tweeters velcro just above front pillar

I am all smiles now :)

By Tim on January 14, 2014

15

found this helpful.

Decent Amp

Solid amp, the bass controller is a plus. Not every song requires high bass notes so this is nice to have if you wanna turn it down/up. It is very well made and has not overheated on me yet. I live in Hell (Phoenix, Arizona) we see 130 degree heat as a high and like 110 normal in summer i mounted this in my trunk and I havent had a problem yet. If you are looking for a nice amp this is it, if you are looking for some crazy SPL thing dont bother. With sonic prices I haven't found this amp cheaper anywhere else, good value/price.

By Scott on July 21, 2013

15

found this helpful.

Good amp for the price

I bought this amp as a temporary setup. I'm running four MTX 5x7's and two kenwood 12's. Sounds great, clear and loud. Bass sounds good too, good amp on a budget.

By el on October 7, 2013

14

found this helpful.

Great Price Great Amplifier

This amplifier is a real workhorse for the price paid. Does not get too warm & have yet to have it shutdown on me from jammin it for hours. I am running 4 Alpine SPR-60 6-1/2 @ 60 RMS each & a single Kicker C104 (10C104) overpowered by 80 watts RMS running at 230 RMS total @ 4 ohms. I have been running the amplifier & gear for about 2 months or so now without problem as mentioned earlier in this review. I have the gear in a 1997 Nissan Pathfinder & it sounds terrific in my opinion. The amplifier is definitely worth every penny I am completely satisfied with my amplifier choice. If you are looking for a 5 channel amplifier that packs a descent punch @ an affordable price than look no farther you have found your new 5 channel amplifier. I have no plans on replacing my amplifier anytime soon will be keeping it until it cooks.

By SandMan on May 28, 2013

13

found this helpful.

Great Amp for just getting a cleaner crisper sound. Able to really crank it up.

If you are looking for a clear power boost, this is the amp for you. I did not need a crazy amount of power for my car but this amp provided enough power to hear everything in my music. You can hear every instrument in the band and not just a loud blur. Matched it to the rest of the components and it was perfect.

By Edward on September 18, 2013

13

found this helpful.

You get what you pay for

First amp blew right away, didn't even crank the volume. Given I don't live in the states the warranty shipping is on me and it was a third the cost of a new one.
Second amp arrives and it works but it has way too much noise in the channels. Some noise filters cure most of that - add that expense to the cost of using this thing. The new amps bass control does not work, and lastly the gain knobs do not work properly. Do I care to get it fixed? Nope, I am sick of dealing with it and find its best to just leave around as a constant reminder to make better decisions on my purchases.

By John on March 6, 2014

10

found this helpful.

Great value for the price - but don't expect amazing audio quality

I purchased this product to replace two large and older amps that were taking up too much room in my car. I was on a budget and knew full well that the industry standard is to pay $1/watt. This rings in hundreds of dollars below and I wasn't expecting amazing sound quality. Hookup was easy and straightforward, and everything seems to work well.

When setting the gain, I used test tones and found clipping to occur at rather low volumes (relatively speaking). In addition, my main gain is at about the halfway mark, but the sub gain and bass boost are completely down to zero - it seems to put out a ton of bass signal to the sub. Finally, there is a loud humming through some of the cables which did not exist previously. The amp and all the wires are in the exact same place as the previous amp, so I'm not sure what's going on with that. I resolved it with a noise filter, except for a super high pitched sequel that comes on when the AC kicks in. Cannot get rid of that one.
I would recommend only if you are willing to sacrifice on sound quality for the sake of budget.

By Joe on September 19, 2013

10

found this helpful.

Good Product

No problems

By michael on January 10, 2014

9

found this helpful.

Nice if on a budget

I picked this amp obviously because it was way cheaper than any of the other 5 channel amps. I am powering all 4 speakers and a sub. Its small enough to be able to be secured on top of my sub box, which I like. The gain and hpf adjustments are hard to set, but Install was very easy, although there is a steady buz sound from the speakers that can be heard whenever the music is low or turned off. Ive made sure the wires are correctly attached and that there was proper grounding. Ill continue to troubleshoot and update once I figure out the problem.

By Wesley on December 18, 2013

8

found this helpful.

Good Value, Nice Aesthetics

I bought this amp while replacing the sound system in my 98 BMW 323. It now powers 2 - Pioneer TS-D1320C(overwatt) 5.25", 2 - Pioneer TS-A6965R 6x9", and an old Audiobahn 400w sub that I can't even remember the model number of. Driving this is a Pioneer DEH-X7500S. Car sounds good, I'm surprised how much bass from the sub came through the notoriously sealed trunk. I don't listen to radio or CD's but from my Zune and I can hear a bit of hiss from the speakers between songs I think this is a sound volume problem as the his goes away when I turn the Zune's volume down.

Compared to it's competitors in the same price range this Amp looks so much better without all that crap on it(led's, clear plastic...)

Features wise I would have liked to see some better markings for adjust gain more accurately, this also affected my Ease of Use score because it's a bit harder to tune than a 2 channel amp.

By Brian on December 2, 2013

7

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio XD700/5v2

• 75 watts x 4 channel + 180 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 300 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 700 watts
• Class D 2 ohms Stable 5-Channel Amplifier

(8)

$429.99

Memphis VIV750.6V2

• 70 watts x 6 channel @ 4 ohms
• 125 watts x 6 channel @ 2 ohms
• Bridged: 250 watts x 3 channel @ 4 ohms
• Total RMS Power: 750 watts
• Class D 2 ohms Stable 6-Channel Amplifier

$399.95

Power Acoustik RZ5-2500D

• Full-Range RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Subwoofer RMS: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Wired Bass Remote Included
• Class D Circuitry
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 4-3/4"W x 12-1/2"L x 1-1/2"H

(29)

$163.99

Infinity Kappa Five

• 75 watts x 4 channel + 200 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 350 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 350 watts x 1 channel @ 2 ohms
• Total RMS Power: 750 watts
• Class D 2 ohms Stable 5-Channel Amplifier

(12)

$289.95

JL Audio RD900/5

• 70 watts x 4 channel + 225 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 900 watts
• Class D 2 ohms Stable 5-Channel-Channel Amplifier

(3)

$659.99

Related Searches


POWER1500.5D small

Item added to your cart.

Price: $139.99

Essential add-ons
Belva BAK06

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 6-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - RED

$94.98

$53.98

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon