Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

SKAR Audio RPX69

6x9" 3-Way RPX Series Coaxial Speakers

In Stock. Only 2 Left!
|

List price $129.99

$84.99

with warranty

You Save: $45.00 (34.62%)

Arrives by Friday, Sept. 26 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock. Only 2 Left!

Arrives by Fri, Sept. 26

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

Free Gift: Sound Damping w/ Select Speakers

For a limited time, get FREE NVX SDSK2 Speaker Sound Damping Kit with a qualifying pair of speakers! Sound damping eliminates rattles, insulates against heat, and also improves the sound and output of your speakers!

14.99

71705

158

SKAR Audio RPX69

$84.99

+

100% OFF

NVX SDSK2

$14.99

Special Price $0 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

FREE $25.00 Gift Card with order!

Receive a free $25.00 Sonic Electronix Gift Card with your order!

25.00

71705

470

SKAR Audio RPX69

$84.99

+

100% OFF

$25 Gift Card at Sonic Electronix

$25.00

Special Price $0 ($25.00 if purchased separately)

$25 Gift Card at Sonic Electronix

• No minimums or restrictions
• No expiration date
• Check your balance easily in your account area
• Secured to your account so you'll never lose it

(Offer 1 of 2)

Combined Total Price

$84.99

You Save $14.99

SKAR Audio Store
SKAR Audio RPX69

Skar Audio Coaxial Speakers

Skar Audio introduces it's RPX Coaxial Speaker Series to provide a great sounding factory replacement speaker in your vehicle! These were thoroughly engineered to amaze in every aspect possible! You will notice that when installing these, they are extremely well built and high quality, and make for an easy installation. The RPX Series comes in a variety of sizes so that no matter what your stock vehicle speaker size is, you have an option here at Skar Audio! Not only do these sound great, but they get very loud with a max power rating over over 120 Watts!

SKAR Audio RPX69

Acoustically Accurate Sound

Skar Audio's RPX series Coaxial Speakers are made with great sound quality in-mind. The RPX69s feature a microfiber paper mid-woofer cone with a rubber surround for a tight and accurate response. Combined with their 1-5/8" mid driver and 3/4" silk tweeter dome with a Neodymium Magnet, they'll be sure to give you the sound quality that you demand.


General Features:

  • 6 x 9" 3-Way RPX Series Coaxial Car Speakers
  • Power Handling:
    • Peak: 540 watts per pair / 270 watts each
    • RMS: 180 watts per pair / 90 watts each
  • 3/4" (30mm) High Grade PEI Tweeter
  • 1-5/8" (44mm) Mid-Range
  • Microfiber paper mid-woofer cone
  • 1" KSV voice coil
  • Rubber surround
  • 16 Oz Ferrite Magnet
  • Rubber magnet boot cover
  • 4 ohms impedance
  • Frequency Response: 32-20,000 Hz
  • Top-mount Depth: 2-7/8"
  • Sensitivity: 92dB
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty

Priced Per Pair

Speaker Specifications

Series
This is the manufacturer product line of speakers.
RPX (SKAR)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 9"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
3-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
3/4"
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

PEI (Polyetherimide)
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Micro Fiber Paper Cone
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
540 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
90 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
32 - 20,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-7/8"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Xscorpion USP-69 6" x 9" Speaker Baffles

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $5.99

Items we think you might want
SPR-69 thumbnail
Alpine SPR-69

• Peak Power: 600W
• RMS Power: 200W
• 1" Swiveling Silk Ring-Dome Tweeter
• Mounting Depth: 2-7/8" • Multi-Layer Hybrid Fiber Woofer Cone
• 4 Ohms Impedance
• Sensitivity: 90dB

Your Price $109.95

693.9I thumbnail
Infinity 693.9I

• Peak Power: 660W
• RMS Power: 220W
• Metal Matrix Diaphragm Dome Tweeter
• Mounting Depth: 3-1/4" • Woven Glass Fiber Woofer Cone
• 2 Ohms Impedance
• Sensitivity: 96dB

Your Price $119.99

NSP69 thumbnail
NVX NSP69

• Peak Power: 220W
• RMS Power: 110W
• CEA-2031 Compliant Speakers
• Mounting Depth: 3-1/8" • 20mm Silk Dome Tweeters
• 4 Ohms Impedance
• Sensitivity: 89dB

Your Price $69.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

RPX69

Weight

7.00lbs

Internal SKU

rpx69

Internal Product ID

71705

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: SKAR Audio RPX69

  • Skar Audio RPX Series Factory Replacement Car Speakers
  • Sonic Electronix: The X Factor when Shopping Electronics