Expert Service 1-661-257-9993 [Hours]

Lanzar OPTIBT44

4" Optidrive Series Heavy Duty Aluminum Bullet Super Tweeter

We apologize

This item has been discontinued

Item Added to Cart

Lanzar OPTIBT44

4" Optidrive Series Heavy Duty Aluminum Bullet Super Tweeter

$24.99

Keep Shopping

NVX XWS1625

25 ft. of True Spec 16 Gauge EnvyFlex Speaker Wire

$15.99

Add
Dynamat Xtreme Wedge Pak

Just enough Dynamat to install around tweeters and speakers.

$24.99

Add
Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Lanzar OPTIBT44.

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • 4" Optidrive Series Heavy Duty Aluminum Bullet Super Tweeter
  • Power Handling:
    • Peak: 600 watts
    • RMS: 300 watts
  • Heavy Duty Aluminum Super Tweeter
  • High Temperature 1.75" Kapton Voice Coil
  • Neodymium Magnet Motor Structure
  • Enhanced Ferrofluid Voice Coil
  • 4 ohms impedance
  • Frequency Response: 2,000-20,000 Hz
  • Top-mount Depth: 2-13/16"
  • Sensitivity: 102dB
  • Authorized Internet Dealer
  • 1 Year Manufacturer's Warranty

Priced individually

Tweeter Specifications

Priced Per
Car Tweeters are typically sold in pairs so you will receive 2 tweeters for each purchase on tweeters marked "Priced Per Pair". If a tweeter is marked "Priced Per Each" then the tweeter is sold individually and each purchase you make will result in 1 tweeter. High-powered tweeters are typically sold per each tweeter.
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
4"
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Bullet
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Aluminum
Flush Mount
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

Yes
Surface Mount
If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

No
Angled Mount
If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

No
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
102 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
2,000 - 20,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-13/16"
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX XWS1625

25 ft. of True Spec 16 Gauge EnvyFlex Speaker Wire

Your Price $15.99

Belva BBSW167

16 Gauge 7 Meter (23 Ft) Speaker Wire

Your Price $12.99

Dynamat Xtreme Wedge Pak

Just enough Dynamat to install around tweeters and speakers.

Your Price $24.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Items we think you might want
PT.2 main
Precision Power PPI PT.2

1" Titanium Bullet Tweeters • 90W Max • 4 ohms impedance • Heavy-duty magnet structure • Frequency response: 3,000-20,000Hz • Sensitivity: 109dB • Top-mount depth: 1-1/10"

Your Price $24.99

R1T-S main
Rockford Fosgate PRIME R1T-S

1" Prime Series Tweeter Kit • RMS: 80 Watts Per Set / 40 Watts Each Side • Peak: 160 Watts Per Set / 80 Watts Each Side • Lightweight Mylar Dome Tweeter • Frequency Response: 2,500 - 22,000 Hz • Grilles/Trim Rings Included

Your Price $33.74

Browse 1 question and 2 answers
Hide answersShow all answers | Sort by
is this sold in pairs?
A shopper on Feb 10, 2015
Best Answer: Hello,

The Lanzar OPTIBR44 are Priced individually, as specified in the description. Please plan accordingly.
Reply · Report · Customer SStaff on Feb 10, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

OPTIBT44

UPC

068888994385

Weight

2.50lbs

Internal SKU

optibt44

Internal Product ID

72827

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Lanzar OPTIBT44