Expert Service 1-877-289-7664 [Hours]

Belva BPKG210

1000W Complete Bass Package with Two 10" Subs in Ported Box, Monoblock Amplifier and Amp Kit

In Stock
|

List price $349.99

$179.99

with warranty

You Save: $170.00 (48.57%)

Order within 16 hrs 39 mins to ship 7/10

Arrives by Monday, July 14 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Mon, July 14

Belva Slappin' Bass Packs

The newest addition to the Belva line-up is an entire series of complete bass packages! These loaded enclosures also include an amplifier, and wiring to make sure you’re supplied with everything you need to add bass to your vehicle. Belva added these loaded ported enclosures to their line-up in an attempt to revitalize the car audio industry with quality bass at an affordable price, and making the process easier than ever before.

As soon as you receive your new bass package, installation is a 4-step process. First – make power connections. Second – make signal connections. Third – connect subs. Fourth – tune the amplifier and enjoy your new bass system. Installation of a subwoofer package has never been so easy!

The wiring included with the package is completely true to gauge so the amplifier can perform at its very best. The quality of the wiring is very high for such an affordable kit. The subwoofers are also loaded into a ported enclosure. These ported enclosures allow for the system to be much more efficient - giving you more bass output per watt.

Not only is the installation easy, but the value of quality bass per dollar is second to none. These systems are one of the most amazing deals we’ve ever been able to offer at SonicElectronix.com. This BPKG210 includes two 10” subwoofers enclosed in a ported box, a monoblock amplifier to drive it, and a complete 8 gauge amplifier kit to wire the system up. A remote bass knob & high level inputs are included for compatibility with any system - and remote bass adjustments allow you to tune the bass to your liking on the fly. Adding 1000 watts of gut wrenching bass has never been easier.

Subwoofer Features:

  • Two 10" Belva Subwoofers Included
  • Power Handling:
    • Peak: 1000 watts total (500 watts each)
    • RMS: 500 watts total (200 watts each)
  • Impedance: 4 ohm SVC
  • Polypropylene cone
  • Durable rubber surround
  • 1.5" black aluminum voice coil
  • 37 oz. ferrite magnet motor structure
  • Authorized Internet Dealer
  • 1-year Sonic Electronix Warranty

Amplifier Features:

  • Class A/B Monoblock Amp
  • Adjustable gain
  • LPF: 40-300Hz
  • Bass Boost: +0-12DB
  • One pair of preamp outputs
  • High level/speaker level inputs
  • Remote bass knob included
  • 25A fuse

Enclosure Features:

  • Dual 10" Ported Subwoofer Enclosure
  • Preloaded with Belva subwoofers
  • Tuned perfectly to get the best bass from the BELVA subs

Amp Kit Specifications

  • Complete 8 Gauge Amp Kit with 2-Channel RCA Cable
  • High strand count for maximum flexibility
    • 17ft. frosted red 8 gauge power wire
    • 3ft. frosted black 8 gauge ground wire
    • 17ft. gray remote turn-on wire
    • 17ft. 2-channel twisted-pair noise rejecting RCA cable
    • 10ft. frosted red speaker wire
    • Nickel plated die-cast zinc Mini-ANL fuse holder
    • 40A mini-ANL fuse
    • (2) 8 Gauge Nickel plated brass ring terminals
    • (5) 14-16 Gauge Nickel plated brass spade terminals
    • 8 Gauge grommet
    • Miscellaneous connectors, terminals and wire ties

Amplifier Power Specifications

RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
250 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

250 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
500 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1000 watts

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Ported Bandpass
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Hatchback Style, Angled Back
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
On Sale

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
70%
4 Star
20%
3 Star
10%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.2
Value
4.7
Features
4.5
Design
4.6
Usability
4.6

Kz

Canada

Overall
Durability
Value
Features
Design
Usability

Good Value

June 7, 2014

This is a good product for those looking for an average subwoofer package. So far i have no problems with it and the sound is of quality rather than extreme bass which was what i was initially looking for. If you want heavy bass then this is not what your looking for. If you want space in your trunk and a nice quality enjoyable sound then this is the perfect package.

0 of 0 found this helpful

Help our customers find the most helpful reviews

cherie

Lexington Kentucky

Overall
Durability
Value
Features
Design
Usability

great value

June 1, 2014

I had been searching everywhere for some speakers and a amp which most of the time you had to pay for everything separate which was costly and that was not including the wires thats when I found sonic eletronix I found what I was looking for quick and got everything including for one low price and to top it off my order was delivered within 24 hours

0 of 0 found this helpful

Help our customers find the most helpful reviews

David

Portage, MI

Overall
Durability
Value
Features
Design
Usability

Pretty good

May 18, 2014

This worked out very well, box is kinda small but great for the price, with good quality, would recommend it

0 of 0 found this helpful

Help our customers find the most helpful reviews

Thomas

Greenland

Overall
Durability
Value
Features
Design
Usability

great subwoofer

March 7, 2014

I think it's easy to use, deliver good performance and it doesn't use all the spaces..

0 of 0 found this helpful

Help our customers find the most helpful reviews

Blake

Idaho

Overall
Durability
Value
Features
Design
Usability

Very Good

February 11, 2014

I have never owned any thing like this before, now it's got me hooked. great starter kit, but could be a little louder.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Shaw

Vancleave

Overall
Durability
Value
Features
Design
Usability

I guess

January 31, 2014

I got this package deal not knowing what to expect. The amp is trash along with the hook up wires, in my opinion, with that being said the box and the speakers them self are great on sound Quality. They do not beat the block but do have a good hit to them I put mine in a ford ranger xlt and I wasn't disappointed and I was the guy that use to have 15s in the back of an expodision I would recommend this set up for small trucks.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Alexander

Poke Town, ID

Overall
Durability
Value
Features
Design
Usability

Bumps Hard!

January 10, 2014

I put this set up in my '04 Hyundai Santa Fe on a Friday, and got pulled over on my way to work on Monday for having my system too loud! For the value it can not be beaten!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Droopy

Amarillo

Overall
Durability
Value
Features
Design
Usability

Belva

January 9, 2014

I was very surprised on the sound And performance of the subs and the amp the box is built for extreme performance great deal

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tasha

Pell City Alabama

Overall
Durability
Value
Features
Design
Usability

Speaker System

November 14, 2013

I just got my speakers hooked up today and I love them.

0 of 0 found this helpful

Help our customers find the most helpful reviews

devon

ohio

Overall
Durability
Value
Features
Design
Usability

pretty good

October 19, 2013

The subs are very good i give them a 10 out of 10. The amp was what disappointed me. My amp fried in about and hour of use. I have to buy a new amp now. Its just very under powered. overall a great package. I definitely recommend these subs, and use the money you saved on a new amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

BPKG210

UPC

818060012433

Weight

39.40lbs

Internal SKU

bpkg210

Internal Product ID

72858

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Belva BPKG210