Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

FiiO E18 Kunlun

Android USB Rechargeable Portable Headphone Amplifier & DAC with 96KHz/24Bit Sample Rate

List price $199.99

$159.00

with warranty

You Save: $40.99 (20.50%)

Arrives by Friday, Aug. 1 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Fri, Aug. 1

Alas, The FiiO E18 Kunlun Has Arrived!

FiiO E18 Kunlun Portable USB DAC and Amplifier designed for Smartphones. More Specifically, Android Smart Phone Devices. Connected via Micro USB OTG cable, the E18 would first decode the music stream, then amplify it. The E18 can even remotely control the playback of songs on the phone. The FiiO E18 can also serve as a mobile power supply to charge the phone, so you are totally free of worries of running out of battery when listening from your phone. Why the FiiO E18 you ask? Because Sound Really Matters!

What's In The Box?
  1. FiiO E18 Kunlun Portable Headphone Amp / DAC
  2. E18 Protective Sleeve Cover (Case)
  3. 2x Short Micro USB Charge / Data Cables (Approx 3 3/4 Inches)
  4. Micro USB to USB Cable
  5. 3.5mm Stereo Audio Cable
  6. 3.5mm Male to RCA Female
  7. 4 Rubber Band Smartphone Straps
  8. Rubber Pads (for Bottom of Device)
  9. User Guide
  10. Warranty Information

Product Features:

  • Portable headphone amplifier and Digital to Analog Converter (DAC) Tailored for Smartphones
  • Designed Specifically for Android Based Operating Systems
  • USB connection allows for digital audio conversion
  • Micro USB On the Go cable included
  • Serves as mobile power supply to charge your phone as well
  • Independent volume controls
  • 1/8" (3.5mm) line-in port for portable amplification of analog audio
  • Enhanced user interface allows for independent adjustment of treble, bass, gain, and balance controls
  • Single-button on/off control
  • USB rechargeable lithium ion battery
  • Bright OLED display
  • Manufacturer Part Number: E18 (E-18)
  • Product Model: FiiO Kun Lun (Kunlun)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

 

Product Specifications:

  • Volume Control: ALPS Potentiometer
  • USB Sample Rating: 32 / 44.1 /48 / 96 KHz @ 16 / 24 Bit
  • Crosstalk: Greater Than 72 dB @ 1 KHz
  • Input Overload: 1.5 Vrms
  • Bass Boost: 2 Level
  • Audio Input: 3.5mm Stereo Mini Jack
  • Headphone Output: 3.5 mm Stereo Mini Jack
  • Power:
    • Drive Ability: 16 Ω ~ 150 Ω (Recommend)
    • Output Power: Greater Than 300 mW @ 32 Ω
    • Output Impedance: Less Than 0.3 Ω
    • Frequency Response: 20 Hz - 20,000 Hz @ 10 kΩ
    • Signal-to-Noise Ratio: Greater Than 106 dB
    • Total Harmonic Distortion + Noise (THD+N): 0.005% @ 1 KHz / 32 Ω
    • Dynamic Range: Greater Than 100 dB
    • Max Gain: Greater Than 6 dB
    • Peak Output Voltage: 8 Vp-p
    • Max Output Current: Greater Than 94 mA
  • Battery:
    • Supply: Rechargeable Battery, Built-In
    • Battery Capacity: 3500 mAh
    • Battery Life:
      • Amplifier Only: Less Than 25 Hours
      • DAC & Amp: Less Than 12 Hours
    • Charge Time: 4 Hours
    • Power / Charger: USB 5V / 500 mA, Recommend: USB 5V / 2A
  • Approximate Dimensions: 5.11"H x 2.6"W x 0.57"D (130mm (H) x 66.2mm (W) x 14.6mm (D))
  • Approximate Weight: 162 Grams (5.71 Ounces or 0.357 Pounds)

Headphone Amplifier Specifications

Amplifier Style
Some headphone amplifiers are designed to be portable and others are meant to be placed on a desk. This will tell you what style of amplifier this item is.
Portable
Digital-to-Analog Converter (DAC)
A Digital-to-Analog converter (also known as a DAC) converts a digital audio signal into an analog signal. This is especially helpful for listen to music from digital sources, such as iPods and smart phones.
Built-in
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
10 - 100000 Hz
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<<0.001%
Input Connection
This is the manner in which the headphone amplifiers receive an input audio signal.
3.5mm Mini-Jack
Input Impedance
This is the input impedance of the headphone amplifier.
16-300 ohms
Output Connection
This is the manner in which the headphone amplifier will output the audio signal.
3.5mm Mini-Jack
Number of Outputs
Some headphone amplifiers have a built-in splitter so multiple pairs of headphones can be connected to it. The number specified here is the number of headphones that can be connected to the amplifier.
2
Output Power
This is the output wattage of the headphone amplifier. It is measured in mW.
>250Mw mW
Output Impedance
This is the output impedance of the headphone amplifier.
16-300 ohms
Power Requirement
This is the required way to give the unit power. Common power sources are 120V AC (Common house plugs), batteries, or a combination of the two. If the headphone amplifier uses batteries, this will list the type of batteries that are required. Please refer to the description to find out how many are required for the unit to be properly powered.
Rechargeable Lithium Polymer Battery
Width
The width of the item from left to right (side-to-side) measured in inches.
5.11"
Height
The height of the item, measured from top to bottom, in inches.
2.6"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
0.57"

DAC Specifications

Output Impedance
This is the amount of impedance that the microphone allows.
0.3 ohms
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.001%
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20,000 Hz
Crosstalk
Crosstalk is defined as the unwanted transfer of signals across communication channels. The higher this number is, in dB, the better crosstalk rejection the DAC is capable of.
72 dB
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
106 dB
Digital Inputs
The type of digital inputs the digital-to-analog converter features.
Micro USB
Line Level Outputs
The type of analog line level outputs the DAC features.
3.5mm Headphone Jack
Sample Rate
16/24-bit at 32/44.1/48/96 kHz
Power Requirement
This is the required way to give the unit power. Common power sources are 120V AC (Common house plugs), batteries, or a combination of the two. If the headphone amplifier uses batteries, this will list the type of batteries that are required. Please refer to the description to find out how many are required for the unit to be properly powered.
Rechargeable Lithium Polymer Battery

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

E18 (Kunlun)

UPC

6953175711810

Weight

0.77lbs

Internal SKU

fiio-e18

Internal Product ID

74085

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: FiiO E18 Kunlun