Expert Service 1-877-289-7664 [Hours]


Did you know that we price match?

It is important that you always get the best price. Call us at 1-877-289-7664 for our best price on this item or check out our coupons page for great deals!

Power Acoustik THIN-8A

500W RMS Pre-Loaded Active Enclosure With 8" Subwoofer

In Stock

List price $299.99

You Save: $185.00 (61.67%)

Thanks , You Pay:


with warranty

+ FREE Shipping in US 48

Order within 19 hrs 2 mins to ship 10/24

Arrives by Friday, Oct. 28 to zip 94107

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Power Acoustik THIN-8A

500W RMS Pre-Loaded Active Enclosure With 8" Subwoofer


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection


Universal Remote Level Control for Car Amplifier/Amp Bass/Input



Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)



Don't see the accessory you're looking for?
View all available accessories for the Power Acoustik THIN-8A.

Get FAST answers from customers ASK a Question See questions answers

Bundles with this Product


15% Off a Sound Dampening Kit with Your Subwoofer Purchase!

Add an NVX SDTK20 Sound Dampening Trunk Kit to your Subwoofer purchase and save 15%. Simply click the "Add Both to Cart" button. This offer cannot be combined with any other coupons or offers.




Power Acoustik THIN-8A



15% OFF



Special Price $45.89 ($53.99 if purchased separately)


• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price


You Save $8.10

Power Acoustik Audio Store

General Features:

  • Pre-Loaded Active Enclosure With 8" Subwoofer
  • Features built-in 500W RMS monoblock amplifier
  • Cast aluminum chassis
  • Hi-speaker level input
  • 200mV-6V low level RCA input
  • 180° phase inversion switch
  • Dash mount gain control included
  • Variable 2dB low pass crossover
  • Dimensions: 9.5"W x 13.5"D x 3"H
  • Authorized Internet Dealer
  • 1-year Sonic Electronix Warranty

Amplifier Power Specifications

Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

500 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

500 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.


Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Box Exterior Color
The color of the enclosure's exterior/outer finish.
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating


paragould ar

not good or bad

March 14, 2015

The sound is not bad just not enough of it. I ended up getting a kicker comp 10 in the truck enclosure with a kicker 125 amp and it is much better,but also more expensive.

20 of 25 found this helpful

Was this review helpful to you?


Albany, GA

Great product

May 17, 2016

Great sound for the size and price. It fills in the lows in my sons '97 DelSol which I didn't want to take up to much space with a big bulky box. It will not rattle the windows but it is a good product.

0 of 0 found this helpful

Was this review helpful to you?


Paragould Arkansas

status has improved

February 1, 2016

Hi this is Jeff I wrote another review on this sub. We installed this in my brothers F150 with his stock stereo and it sounds really nice. There is no distortion just nice mellow bass now matter how high you turn the remote knob. I had it teamed with an Alpine head earlier and the results were not as good. I tend to think the sub was intended more for a stock system.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added


Universal Remote Level Control for Car Amplifier/Amp Bass/Input

Your Price $7.99


Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $53.99

Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

Your Price $97.97

Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

Your Price $109.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Power Acoustik THIN-8A