Expert Service 1-661-257-9993 [Hours]

Rockford Fosgate Power T8004

800W RMS, 4-Channel Amplifier

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

t8004ad thumbnail

Rockford Fosgate Power T800-4AD

OUR PRICE: $799.95

View item

Item Added to Cart

Rockford Fosgate Power T8004

800W RMS, 4-Channel Amplifier

$369.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$44.99
Add Warranty
3 years of protection

Rockford Fosgate RFK4 4-Gauge Wiring Kit

Get a matching Fosgate wiring kit for your new Fosgate amplifier! Don't forget the RCA's!

$69.99

Add
NVX XFLOC4

4-Channel Line Output Converter with Digital Noise Filter + Line Driver

$14.99

Add
NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$23.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Rockford Fosgate Power T8004.

Get FAST answers from customers ASK a Question See questions answers

  • Power Series 4-Channel Amplifier
  • RMS Power Output
    • 4 ohms: 50 watts x 4 chan.
    • 2 ohms: 100 watts x 4 chan.
    • 1 ohms: 200 watts x 4 chan.
    • Bridged, 4 ohms: 200 watts x 2 chan.
    • Bridged, 2 ohms: 400 watts x 2 chan.
  • Variable high- and low-pass filters (40-400 Hz at 12 dB per octave)
  • ParaPunch bass boost (0-18 dB, variable 35-70 Hz) with wired remote
  • Infrasonic filter
  • Stealth Connections
  • Cast aluminum Heat Sink
  • Class A/B
  • 2/4 channel switch
  • CEA-2006 compliant
  • preamp inputs and outputs
  • Dimensions: 12.8" L x 23" W x 2.6" H
  • 1-year SonicElectronix.com warranty

Product History:

Rockford Fosgate T800-4AD thumbnail
(newest, current model)
Rockford Fosgate T8004 thumbnail
(previous model, replaced by Rockford Fosgate Power T800-4AD)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

50 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

100 watts x 4 channels
RMS Power @ 1 ohm

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 1 ohm, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

200 watts x 2 chan. @ 4 ohms; 400 watts x 2 chan. @ 2 ohms

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.

Power Specifications - Full Range Channels

Peak Power @ 4 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Bridged Peak/Max Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

Power Specifications - Subwoofer Channel

Peak Power @ 4 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

800 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
2 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<.05%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 400 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 400 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
80 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.7
Design
5.0
Usability
5.0
cougar hunter

lafayette, la

Overall
Durability
Value
Features
Design
Usability
MUST HAVE

July 19, 2009

if you wanna be able to tell your friends u have the biggest 4 channel amp they ever seen well this is the amp for u.. the clarity this amp has is amazing. i got all infinity kappa highs and it give them their full potential. what i think the best part about the amp is they send u a test sheet certificate showing the true power ratings. mine said 750 watts rms at 2 ohm and 1166 watts at 1 ohm which is frickin amazing. amp sells for a 800 rms but actually pushes 1166 rms. WOW. i highly recommend watching what highs u put on here and make sure the speakers can handle this massive amp. cause if u fry ur highs and continue to run them it will eventually fry ur amp... i should say the only down side of the amp is that its frickin huge.... u should def have enough room for it...

9 of 11 found this helpful

Was this review helpful to you?

Rod

Sacramento, CA

Overall
Durability
Value
Features
Design
Usability
Incredible closeout value!

May 29, 2009

I came to Sonic Electronix looking for a less powerful, less massive 4-channel amp than this one, but when I saw the closeout price on this unit, I had to jump. Don't let the closeout bother you. This amp is superior in build and performance (1-ohm stable and fan-cooled) to the current Rockford Power Series offerings, and at this price, it's a no-brainer. If I had the budget, I'd have picked up 2 of them. It's way overkill for what I'm doing in my BMW 330i (it's hard to imagine an install for which this amp WOULD NOT be overkill), but this is an amp that I will carry with me through my next several vehicles. It's absolutely bullet-proof. It's how I wish all products were built.

9 of 11 found this helpful

Was this review helpful to you?

Badmedisin

Palmdale California

Overall
Durability
Value
Features
Design
Usability
Best Deal on Planet!!!

May 13, 2009

This amp is unreal, its 50 watts per channel at 4 ohms THE BIRTH SHEET SAID6 99 watts rms @ 4ohms and 751 total rms watts @ 2 ohms and 1252 total rms watts @ 1 ohm thats the birth sheet for this amp and it is so clean and clear its life like, and its kinda big weighs almost 25 lbs and I installed it in the back of my 82 vette. I have a 1 cubic ft sub box with a Infinity kappa perfect 12 ( about 4 or 5 yrs old) and this amp with the sub sounds so life like and I dont have the new speakers yet Im runnin a set of kenwood 4x6 up front and pionieer 6x9s in the rear and it rocks cant wait for the big brown truck (ups) tomorrow .. and I just ordered a set of 4x6 JBL plate speakers for the front and a set of Boston Acoustic sl 95 6x9 for the rear and I will probably end up ordering a new sub from Sonics I got my amp the next day that fast and ups already e-mailed me and said my speakers are on the way! Thanks Sonic my car sounds so tight I have a constant smile now !

8 of 10 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Rockford Fosgate RFK4 4-Gauge Wiring Kit

Get a matching Fosgate wiring kit for your new Fosgate amplifier! Don't forget the RCA's!

Your Price $69.99

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $29.99

NVX XKIT44 4-Gauge 4-Channel Wiring Kit

4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $89.99

NVX XFLOC4

4-Channel Line Output Converter with Digital Noise Filter + Line Driver

Your Price $14.99

PAC LP7-4

L.O.C. PRO Series 4-Channel Line Output Converter with Remote Turn On

Your Price $32.95

AudioControl LC6i (Black)

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

Your Price $109.99

NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $23.99

NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

Your Price $11.99

NVX XIX45 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $34.99

StreetWires ZN9 Series Interconnect Cable

16.4 ft. of 4-Channel RCA Cable with Rhodium-plated contacts and ZeroNoise construction for clear signal transfer!

Your Price $74.77

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1250 Speaker Wire

50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $29.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power XP750-CK

XP750 AGM Battery + Installation Kit for 1000-1500 Watt Audio Sytems

Your Price $149.99

Kinetik HC1200-BLU

Kinetik BLU Series 1200 Watt 12V High Current AGM Car Audio Power Cell - Battery

Your Price $109.85

Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

Your Price $119.99

NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

Your Price $89.99

Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

Your Price $21.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.21

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $9.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

T8004

UPC

780687317256

Weight

26.00lbs

Internal SKU

t8004

Internal Product ID

7734

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate Power T8004

  • 3Sixty3 Aftermarket Setup Wizard Tutorial
  • How To Install an Amplifier: Car Amplifier Basics Part 2