Expert Service 1-661-257-9993 [Hours]

MTX 9515-22

1500W RMS 15" 95 Series Dual 2-Ohm Car Subwoofer

Special Order. Ships at Later Date
|

10% Rewards
Free Return Shipping
Extended Warranty
Learn More

List price $999.95

You Save: $100.00 (10.00%)

Thanks , You Pay:

$899.95

with warranty

+ FREE Shipping in US 48

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

MTX 9515-22

1500W RMS 15" 95 Series Dual 2-Ohm Car Subwoofer

$899.95

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$101.99
Add Warranty
3 years of protection

NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

$29.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the MTX 9515-22.

Get FAST answers from customers ASK a Question See questions answers

MTX Audio Store

MTX 5510-22 55 Series Subwoofer


The MTX Audio Super woofer might just be the best sounding, next level out right now. The 95 Series name has been known for the last 10 years to have an unmatched SPL output and legendary performance. The Superwoofer's features are meant to make it loud and efficient. With over 40 years of audio experience, MTX Audio makes sure and knows how to create quality audio with their products, and the 55 Series is no exception! Now let's dive into some of the features.

Designed for Accurate SPL


MTX Inverted Apex Surround

MTX Inverted Apex Surround

The MTX Inverted Apex Surround increases the surface area of the sub to allow for more air movement, accurate bass reproduction and higher SPL. Traditional Half-Roll Surrounds have an inherent wrinkling when reproducing bass due to the physics of its motion, which causes distortion. The Inverted Apex Surround moves symmetrically through both positive and negative cycles which eliminates this type of distortion. With an Xmax of 1.25" and the increased surface diameter, the design of this sub creates an increased SPL output.


Glass Fiber Cone

MTX Audio 95 Series Subwoofer

The glass fiber cone provides this subwoofer with a stiffnes to weight ratio that allows it to have a lower weight and increased sensitivity. With this design, the subwoofer creates a higher SPL while using lower power. Couple that with the Inverted Surround and you have efficient movement and power.







Triple Thermal Management

MTX Audio 95 Series Subwoofer

Three features really make sure the superwoofer stay cool: the Spider Plateau Venting, Internal Voice Coil Heatsink and the Radial Ribbed T-Yoke. The Spider Plateau Venting is a mechanical cooling process that targets cool air at the voice coil. This means the subwoofer cools itself as it is playing. The second feature, the internal voice coil heatsink, is a mechanical cooling process. As the subwoofer continuously cycles, it circulates hot air for cool air at the voice coil. Finally, the integrated Radial Ribbed T-Yoke. This is where the backplate absorbs heat from the voice coil and radiates it to the back of the subwoofer away from the voice coil. This acts as a heat sink that dissipates heat and decreases distortion. These three features ensure this subwoofer will play for a long time and at high levels!


General Features:

  • 15" Dual 2 ohm 95 Series Subwoofer
  • Power Handling:
    • Peak: 3000 watts
    • RMS: 1500 watts
  • Recommended power range: 750 - 1700 RMS
  • High Efficiency Glass Fiber Cone
  • Inverted Apex Surround
  • Three layer thermal management design
  • Internal Voice Coil Heatsink
  • Cast Aluminum Basket
  • 8 AWG Compression Terminals
  • 4" Aluminum Voice Coil
  • MAGNET
  • Top-mount depth: 10-1/4"
  • Cutout diameter: 13-7/8"
  • Frequency Response: 17 - 100Hz
  • Sensitivity: 84.9 dB
  • Resonance Frequency (Fs): 24
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually

Check out the 9515-22 Specs and Enclosure Sheet



Product History:

MTX 9515-22 thumbnail
(newest, current model)
MTX T9512-04 thumbnail
(previous model, replaced by MTX 9515-22)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
95 Series (MTX)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
15"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
3000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
1500 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
4"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
17 - 100 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84.9 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
1.25 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

Your Price $29.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $89.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.87

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $94.97

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $92.13

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.97

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 MTX 9515-22 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 MTX 9515-22 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 MTX 9515-22 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 MTX 9515-22 Subwoofers

2 Channel Amp

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

9515-22

UPC

715442352869

Weight

63.00lbs

Internal SKU

mtx951522

Internal Product ID

77563

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MTX 9515-22