Garage
Shop

NVX XPLD3K

True 3000W RMS, Class-D Monoblock Amplifier with Bass Remote

NVX
Shop all NVX
Product videos
highlight-star-icon

• RMS: 1020W x 1 @ 4 ohms, 1900W x 1 @ 2 ohms, 3000W x 1 @ 1 ohm
• Total RMS Power: 3000W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Ultra Efficient Class D Design
• Dimensions: 10" W x 20.5" L x 2.5" H

Learn more about the xpld3k

We apologize

This item has been discontinued

Product Highlights


• RMS: 1020W x 1 @ 4 ohms, 1900W x 1 @ 2 ohms, 3000W x 1 @ 1 ohm
• Total RMS Power: 3000W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Ultra Efficient Class D Design
• Dimensions: 10" W x 20.5" L x 2.5" H

Description


NVX brand icon

Authorized dealer


 

Pure NVX Power

NVX's new XPLD3K amplifier is perfect for those looking for a high output amplifier. It boasts an abundance of features such as subsonic and low pass filters, pre-amp outputs, and gain level control. The sleek design of the chassis really makes this amplifier an eye-catcher. The XPLD3K monoblock includes a wired remote bass knob. Dual speaker terminals bridge the amplifier internally allowing for less confusion when wiring multiple subwoofers.


 

Sonic Electronix Power Certified Amplifier

NVX's XPLD3K monoblock amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings. Learn more about this amp's Sonic Electronix Certified Power Here!

Impedance
Claimed Output
Certified Results
Dynamic Results
4 Ω
1020W @ 14.4v
1024W @ 14.46v
1326W @ 14.69v
2 Ω
1900W @ 14.4v
1857W @ 14.50v
2739W @ 14.54v
1 Ω
3000W @ 14.4v
2837W @ 13.63v
4348W @ 14.30v



General Features:

  • Class D Monoblock Amplifier with Bass Remote
  • RMS Power Rating:
    • 4 ohms: 1020 watts x 1 chan.
    • 2 ohms: 1900 watts x 1 chan.
    • 1 ohm: 3000 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 1024 watts x 1 chan.
    • 2 ohms: 1857 watts x 1 chan.
    • 1 ohms: 2837 watts x 1 chan.
  • Dual Pulse Width Modulated (PWM) MOSFET power supply
  • Wired remote bass level control included
  • Mono channel operation
  • Master and slave input to combine multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Variable subsonic filter (10-30 Hz, 24 dB/octave)
  • Variable low-pass filter (30-250 Hz, 24 dB/octave)
  • Input Sensitivity: 200mV-6V
  • Frequency response: 10-350 Hz
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • LED power (green) and protect (red) indicators
  • Heavy duty copper layer double sided epoxy PCB
  • 0/1 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
  • Dimensions: 10"W x 20.5"L x 2.5"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Extend your NVX Manufacturer's Warranty to 2 Years when you install your new NVX amplifier with a compatible NVX power installation kit! This offer is only available through Authorized NVX dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: NVX XAPK0, NVX XAPK1D, or NVX XKIT02

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
1020 watts x 1 channel
RMS Power @ 2 ohms
1900 watts x 1 channel
RMS Power @ 1 ohm
3000 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
3000 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
>1%
Speaker Level Inputs
No
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
30 - 250 Hz
Subsonic Filter
10 - 30 Hz
Signal-to-Noise Ratio
90 dB
Bass Boost
0 - 9 dB
Remote bass/level controller
Yes
Fuse Rating
300A External Fuse Required
Strappable
Yes
Sonic Certified Amplifier
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

NVX

Model Number:

XPLD3K

Weight:

20.50lbs

Internal SKU:

xpld3k

Internal Product ID:

78508

Product and How-to Videos


  • Zach Kerr of the Colts Shows His Buick at Slamology 2015
  • Elite Audio's NVX Fallen Heroes Build
  • NVX XPLD3K Amplifier Dyno Test | SMD D'Amore AD-1
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
78%
4 star
22%
3 star
0%
2 star
0%
1 star
0%



Durability
4.7
Value
4.6
Features
4.4
Design
4.6
Usability
4.8

Customer Reviews

Sort by:

Loading...

Great amp!

I have this amplifier powering two NVX VCW 124's in a custom ported box. It makes big power, so be sure you have the big 3, 10 farad cap or H/O alternator to get the best benefits. It produces great sound quality at decent volume levels and has yet to get hot. It's relatively small footprint is impressive for the power it makes. PROS: Great quality build, great quality sound, decent price. I like the simple, sleek look of the amp. NVX doesn't use flashy lights and gimmicks, just a grown up, clean, professional look and performance. CONS: Bassknob. The bass adjustment knob on this seems to be quality... at least on the outside. The casing is solid metal and the knob has a good resistance as you turn it. However, the LED on it was WAY too bright... when it was working. About 5 minutes after hooking it up, the LED stopped working. (Which was fine with me because it was INTENSELY bright. And that was in daylight!) From 0-35%, the knob adjusts the bass level a bit too aggressively. From 35% on up, it seems to do little to no adjustment. I still make use of the bass knob as I listen to a huge variety of music. I would certainly like to see an improvement in this area.
However, this does not take away from the fact that this amp beats smooth and steady. I would absolutely recommend it to anyone serious about their bass.

By Gage on April 29, 2014

41

found this helpful.

Better then hifonics

I bought from sonic electronix because I'm buying from canada and there's very few sites that offer warranty over the border.
I DID previously purchase a Hifonics amp from a different website that ended up catching fire and almost burning my Infiniti to the ground, just to find out that they wouldn't cover the warranty because I'm in canada.
I can tell you sonic DOES offer warranty to canada, and because of this, I've been buying (and will continue to buy) my car audio from sonic electronix. I was after a powerful amp, and this amp came recommended from Wes (at sonic) and he gave me an amazing deal on that and on the shipping. I am completely satisfied, I'm only running the amp at 4 ohms at the moment and it's a crazy amount of power, I can imagine when I get it to 1 ohm! Thank you sonic electronix!

By Alex on August 31, 2014

36

found this helpful.

Exelent amplifier

One of the best amplifier i ever bought.
Awesome look on it very easy to adjust and understand
Just love it

By Kim André on April 29, 2014

35

found this helpful.

Awesome!!

There are no other words besides awesome! I've had this for over a month powering my Orion HCCA Competition Sub and it keep feeding it all the power the sub can take.The Amp case is solidly build which helps with durability toughness. The Angle terminal end give it a professional look but can be a pain at times with 1/0 gauge wiring running to it.
The only problem I have is the remote LED is too bright. It's blinding trying to drive at night and even during the day at times.
This amp is by far one of the best amps I have ever purchased.

By Raymond on January 15, 2015

31

found this helpful.

Powerful and Clean sound ! Quailty korean built amp

ive got the XPLD3k running 6 600RMS 12'' subwoofers and it pushes them to the very max ! it is very efficient compared to the other 3k's i have owned in the past , i do suggest running a ohio generator alternator and a couple of good agm batteries . the amp stays very cool due to its very big heavy heat sink ,no fans but they are not needed and there is some small vents in the side plates and no other vent holes which is nice so your amp does not get much dust or anything inside it . the angled inputs are kind of a pain but do really make the install look nice and clean with minimum wires showing , overall its a great amp and the cost on it is amazing ! id highly recommend it to anyone , also i dont use the bass knob at all ''never took it out of the box'' i instead use the NVX XBRC which adjusts your rca's going into the amp rather than adding bass boost and distortion

By Brad on July 11, 2014

29

found this helpful.

NVX 3K

great product would totally recomend. good upgrade over my hifonics 2.2k. a little expensive would rather buy 2 hifonics x14s strapped would be cheaper with more watts

By jcl on December 1, 2014

25

found this helpful.

Beast Mode

I haven't played with it too much or had it tuned, but.......beast mode....beast mode....A+++++

By Papa Smurf on June 8, 2015

16

found this helpful.

Good amp

It's a really good amp if you want something that bangs hard this is what you want

By Moneyman on August 24, 2015 Checkmark Icon Verified purchase

8

found this helpful.

King kong

I am not writing this review to put down the next company, I have owned the power bass 3000 max, I have owned the hifonic 2000 brx ,the 2400 brx they are all class D amps .listen I brought 2 cvx 15s i had a sealed custom box made ,the brx 2400 played them,but I knew I needed more power.so i talked to a hifonic tech about the atlas 3000, but for 2years i only seen 2 reveiws so that didnt sit well. I talked to Joe at nvx after 3 or 4 calls and asking questions I went with the nvx 3000.listen the bass from that amp make my house windows vibrate from a block away ,stupid ,insane bass !! ,last week we went to the drive -in and this!! gorilla!! played 2 an a half hours none stop, it was no where near hot just a little I mean a little warn this is the best amp I every owned so far buy it, you want need to look any further. (!! angry bass !!)

By dagwood on August 18, 2015

8

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(36)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(27)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(9)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


XPLD3K small

Item added to your cart.

Price: $699.99

Essential add-ons
NVX XKIT02 True 0-Gauge Wiring Kit

Full Spec 1/0 Gauge 100% (OFC) Oxygen Free Copper Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 4000 Watts

$199.99

$149.99

Add to cart
Cerwin Vega 1/0 Gauge Amp Wiring Kit

Designed specifically for car audio systems up to 4000 watts

$199.99

$119.99

Add to cart
Stinger SS2400XS

1/0 Gauge Amplifier Power Kit w/ Blue Twisted RCA & Satin Acc w/ Anl Fuse Stinger

$229.00

$109.99

Add to cart
T-Spec V8-AK1

1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's

$257.00

$139.99

Add to cart
NVX XAPK0

Full Spec 1/0 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$174.99

$147.99

Add to cart
Stinger SK4201

1/0 Gauge Power Amplifier Wiring Kit

$279.00

$147.99

Add to cart
Stinger SK6201

1/0 Gauge Power Amplifier Wiring Kit

$309.00

$159.99

Add to cart
T-Spec V10-AK1

1/0 Gague Amplifier Wiring Kit with 2-Channel RCA's

$149.95

$163.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
X Series RCA Interconnect Cable

16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors

$29.99

$18.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
T-Spec V8-3DDC

3.0 Farad Capacitor with Digital Read-Out and Built-In Distribution Block

$116.00

$89.00

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon