Expert Service 1-877-289-7664 [Hours]

Kinetik HC600 Power Cell with Installation Kit

850 Amp 12V (20Ah) High Current Car Audio Power Cell/Battery + Installation Kit

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Kinetik HC600-KIT Power Cell + Installation Kit

This Kinetik 12-Volt Car Audio Power Cell features a sealed absorbed glass mat (AGM) design and is perfect for 600-watt car audio sound systems. The HC600-KIT is the ideal solution for adding an additional battery to provide the extra power needed for a high performance aftermarket system. The included Wire and Accessories allow for easy installation. It's leak-proof design and no external vents allow this power cell to be installed inside the vehicle without the risk of hazardous leaks.

Kinetik HC600 Power Cell puts out 850 cranking amps with a 20 amp hour rating. This battery will resist extreme heat conditions and vibrations and is 100% sealed in a reinforced ABS plastic case. Kinetik has equipped this power cell with more plates for stronger energy density and a high voltage underload. You will love the way Kinetik batteries get your system powered up and ready to go!

Kinetik HC600 (KHC600)

850 Amp 12V High Current Car Audio Power Cell
Quantity: 1

Battery Features

  • 12V High Current Car Audio Power Cell
  • Sealed absorbed glass mat (AGM) design
  • Can be used as a replacement for your vehicles standard battery
  • Can also be used as an additional battery to power your high-performance sound system
  • Perfect for 600W car audio stereo systems
  • Stores energy so you don't need a capacitor for your system
  • Leak-Proof, non-hazardous design
  • No external vents allow this battery to be mounted anywhere with no leaks
  • Fits in almost any factory battery location
  • Ultra low ESR
  • More plates for stronger energy density
  • Higher voltage under load
  • 100% Sealed and maintenance free
  • Tightly packed cells
  • Resists extreme heat & vibrations for ultimate performance
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Battery Specifications

  • Max burst amps: 850
  • Cranking amps: 600
  • Power: 600 watts
  • Ah: 20
  • Weight: 14 lbs
  • Dimensions: 3D x 6-1/2W x 7H

NVX XW4BL20

20 ft. of Metallic Powder Blue EnvyFlex True Spec 4-Gauge Power/Ground Wire Cable
Quantity: 1

Product Features:

  • XW4BL20 Metallic Powder Blue 4-Gauge Power/Ground Wire Cable
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • Premium power and ground wire provides optimal power transfer
  • EnvyFlex outer jacket makes installation and routing of the cable easy
  • Color: Metallic Blue
  • Length: 20 feet
  • Strand Count: 1862
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX XW4GR5

5 ft. of Metallic Gray EnvyFlex 4-Gauge Power/Ground Wire Cable
Quantity: 1

Product Features:

  • 4-Gauge EnvyFlex Power/Ground Wire
  • Metallic gray flexible multi-strand construction, conforms to your needs
  • 5 ft. pre-cut length for small tasks
  • Ideal for high-powered systems of over 1000 watts
  • Durable translucent jacket insulates and withstands extreme conditions
  • True to gauge measurement for full spec performance and accurate fits
  • Made from silver-tinned 100% virgin copper
  • Strand Count: 1862
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

NVX XMFH48

World's Smallest AFS / Mini ANL Fuse Holder
Quantity: 2

General Features:

  • Accepts 4 gauge or 8-gauge wire
  • Works with a Mini ANL (MANL) Fuse or AFS Fuse. Fuses sold separately.
  • High temperature polycarbonate base and cover
  • Forged and machined all-brass construction
  • Satin-chrome plating
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BMANL125

MANL Fuse 125A, 4PCS/Pack
Quantity: 1

General Features:

  • Mini-ANL (MANL/AFS) 125A Nickel Plated Fuses
  • Heavy duty construction
  • Nickel plated for better power transfer
  • Amperage: 125A
  • Fuse Type: Mini ANL (MANL)
  • Quantity: 4 Fuses
  • Packaged in resealable retail polybag
  • Also available in 80A, 100A and 150A
  • Authorized Internet Dealer
  • 30-Day Return Policy

Belva BRT438

4 Gauge Ring Terminals, 3/8" Opening with Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
Quantity: 1

General Features:

General Features

Cranking Amps
An amp is a unit of electric current. The greater the number of amps, the more powerful the unit is.
600
Amp Hours (AH)
A unit of measurement for battery capacity, obtained by multiplying a current flow in amperes by the time in hours of discharge.
20
Width
The width of the item from left to right (side-to-side) measured in inches.
6-1/2"
Height
The height of the item, measured from top to bottom, in inches.
7"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
3"
Maximum System Wattage
Different car batteries will work for systems putting out different wattages. This refers to the recommended wattage range that you should use this battery for.
600 watts
BCI Group Number

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

XS Power 500

XS Power 500 Battery Heat Protection Wrap

Your Price $29.99

Stinger BATTHD

Adjustable Battery Hold Down Kit

Your Price $9.99

Belva BBG3KT

1/0 AWG Big 3 Upgrade Kit with CCA Wire for Audio Sytems up to 250 Amps

Your Price $39.99

NVX XBG3PK

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $79.99

XS Power AK1000 4 AWG CCA Secondary Battery Wiring Kit

Comes with all the wiring and fusing needed to install a second battery for your 0-1500 watt audio system.

Your Price $49.99

MechMan Alternators 1020R Secondary Battery Wiring Kit

Premium Secondary Battery Installation Kit for Audio Systems up to 4000 Watts

Your Price $89.95

CTEK MULTI US 3300

12V De-Sulfating Smart Battery Charger for Lead Acid Batteries

Your Price $64.99

XS Power PSC15

Microprocessor Controlled Multi-Stage 12V-16V Battery Charger and 15 Amp Power Supply

Your Price $199.99

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Need to add an invertor system to vehicle
Addam G on Sep 1, 2014

Product Summary

Manufacturer

Model Number

HC600-KIT

Weight

17.73lbs

Internal SKU

hc600kit

Internal Product ID

79457

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kinetik HC600 Power Cell with Installation Kit