Expert Service 1-877-289-7664 [Hours]

Spring Clearance - Dot Sale

Pioneer TS-SWX2502

1200W 10" Shallow-Mount TS Series Single 4 ohm Loaded Enclosure

Out of Stock - Backorder
|

Save Money with Sonic Exclusive Bundless: View All Deals!

List price $229.99

You Save: $100.00 (43.48%)

$129.99

with warranty

+ FREE Shipping in US 48

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

Pioneer Audio Store

Subwoofer Features:

  • 10" Single 4 ohm TS Series Shallow Mount Subwoofer
  • Power Handling:
    • Peak: 1200 watts
    • RMS: 400 watts
  • Impedance: 4
  • Reinforced MICA injection molded resin cone
  • Elastic polymer surround
  • Frequency Response: 20-125 Hz
  • Sensitivity: 93dB
  • 36 oz. ferrite magnet motor structure
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

General Enclosure Features:

  • 10" shallow mount sealed enclosure
  • 5/8" MDF enclosure
  • Subwoofer mounting depth: 3-1/8"
  • Subwoofer cutout diameter: 9-1/8"
  • Dimensions: 13-7/8"D x 18-5/8"W x 6"H

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1200 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mica Injected Polypropylene (MIPP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Elastic Polymer
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
93 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 125 Hz

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
1
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
6"
Width
The width of the item from left to right (side-to-side) measured in inches.
18-5/8"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
13-7/8"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
5/8"
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
89%
4 Star
11%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
5.0
Features
4.8
Design
4.9
Usability
4.8
Doug

Colorado

Overall
Durability
Value
Features
Design
Usability
Easy Inexpensive Bass Upgrade

March 15, 2015

I wired this in place of the stock "subwoofer" of the B&O system in my Audi. It takes up very little trunk space, matches the look of the interior and makes an astounding difference in the overall sound of the stereo.

For just over $100, it's a no-brainer. I'm sure it would sound even better with it's own amp, but see no reason to go to the trouble.

Note that the stock speaker is 8ohms and this one is 4 ohms. Doesn't seem to be an issue, but be aware.

6 of 9 found this helpful

Was this review helpful to you?

Kasey C

Littleton, CO

Overall
Durability
Value
Features
Design
Usability
This sub hits HARD!

December 20, 2014

I'm very happy with this woofer. It hits hard for a shallow mount as long as you get a quality amp to power it! This sub SLAMS when it is paired with the Pioneer amp GM-D9601. The amp makes a huge difference, and don't make the mistake of buying a cheap amp to power it.

23 of 43 found this helpful

Was this review helpful to you?

Wan

sioux city

Overall
Durability
Value
Features
Design
Usability
NVX MAN IOWA

August 24, 2014

I installed a pr of these in a brand new 2014 F-150 & powered them by a my favorite company the NVX JAD1200.1 & let me tell you it slams & sounds amazing!! Anyone wanting to bump & have have good sound with hardly any room to work with, this is the way to go!! I've been installing for 20+yrs so you can trust my word! Also fast fast shipping got them in 3days! Sonic is the Sh%t... Thanks guys!!

25 of 47 found this helpful

Was this review helpful to you?

Kyle

Yakima, WA

Overall
Durability
Value
Features
Design
Usability
Perfect for small vehicles

November 8, 2014

This sub hits hard! It fits perfectly in the back floor of a Supercab ranger, takeing up very little space.
It sounds fanastic, it can pound along with a rap/EDM song and shake the truck, or dellicatly recreate a acoustic upright bass in classical music.

All over a great value for the output. it really fills out my system.

22 of 43 found this helpful

Was this review helpful to you?

Flatlander

Lubbock tx

Overall
Durability
Value
Features
Design
Usability
Time saver

September 30, 2014

I bought this unit because I didn't want to spend the time building a box for the trunk on my firebird. It has just the right pop that I was looking for. It was a perfect fit sitting right under the package tray. Couldn't be happier.

28 of 55 found this helpful

Was this review helpful to you?

Phil

San Diego

Overall
Durability
Value
Features
Design
Usability
Excellent Bang for the Buck and placement

August 13, 2014

I have had many JL stealthboxes in a few different cars and they have all been amazing! but on my vw GTI i didnt want to pay that kind of cash (600+) I dropped in an amp with a built in line convertor and ran a JL 12" in a ported box. Of course sounded great with tons of thump. Problem is i lost all my trunk for one sub...........

Ran across this sub enclosure at an amazing deal shipped and had to try it. Most reviews online that say this sub sucks are for the lower 400W model which looks identical to this one. This higher end version is PERFECT, runs excellent additional low end to my stock HU. Plenty of thump and i have my bass knob turned only a quarter and it bumps really nice and loud.

The best part about this sub and the main reason i bought it, is it takes up almost no space. And if i want to stack stuff on top of it i can easily because its down firing. If i want to fold the seat down and really use my hatchback space i just prop it up on its side and have almost all my trunk space. WORTH EVERY PENNY.

Works so well i actually have 3 friends who bought the same enclosure to put in their cars after hearing mine. One friend actually took out his spare tire in his mazdaspeed 3 and this enclosure fit perfectly in its spot.

Had it for a month and so far so good, great product.

22 of 43 found this helpful

Was this review helpful to you?

Judy

Franklinton, LA

Overall
Durability
Value
Features
Design
Usability
Pioneer subwoofer

March 29, 2015

This woofer gives clean deep rich bass that isn't overwhelming. By this I mean it adds great sound quality for the occupants of the vehicle, not others walking down the sidewalk.

2 of 4 found this helpful

Was this review helpful to you?

Scott

Liberty, MO

Overall
Durability
Value
Features
Design
Usability
Nice SubWoofer

January 19, 2015

I purchased this for my Silverado 2014. It turns out it does not fit. It is too big to fit under the back seat. I don't know what I am going to do with it now. It sounds great and I would love to mount it, but for the moment, I am stymied with it. I rated the ease of use lower because it wont fit. Not the product fault.

23 of 49 found this helpful

Was this review helpful to you?

Juan

Tomball, TX

Overall
Durability
Value
Features
Design
Usability
Small Size, Big Performance

September 18, 2014

Small enough to fit under or behind the back seat of a pickup truck while delivering big sound, clear enough to feel the bass without the window vibration of other subs. This can only be accomplished after some adjustments of the amp and head unit. Be patient, it takes a little time to find the right settings. This is a down firing sub which means it doesn't bounce like your regular subs but it sounds great. Hook it up with a mono amp so you can get the most of it. If all you want is a powerful sub with clean bass, this is a great choice.

22 of 48 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $16.99

Browse 9 questions and 31 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Can be used as a downfiring subwoofer.
Paul W on Apr 19, 2015
I have 2 shallow mount 12's, love them, sound great and seem reliable..
Matthew E on Mar 15, 2015
This should be the perfect fit under the rear seat of my 2012 crewcab f150 the price is great and pioneer makes great speakers now my kids will have the leg room need when i remove the big box i have in there now.
enrique m on Apr 1, 2015
Room is a priority in the cab of small truck. Don't have time to build a box.
Daniel S on Feb 25, 2015
Does this sub come with an amp.?
Browning B on Oct 27, 2014
Best Answer: Hello,

No. The SWX2502 is only a "Loaded Enclosure", not a "Powered Enclosure". The sub will need an amp providing ~400w @ 4ohms, like the Kenwood XR600-1 or Pioneer GM-D9601.
Pioneer GM-D9601
Pioneer GM-D9601
Kenwood XR600-1
Kenwood XR600-1
Reply · Report · Customer SStaff on Oct 28, 2014
· Add Answer · I Have This Question Too (3)
Does this sub woofer need an amplifier paired with it because it shows up as a loaded sub enclosure which means to me that its ready to be wired up, no need for an amp?
Roland B on Sep 5, 2014
Best Answer: It actually does need an amplifier. "Loaded" in this case means it comes with a subwoofer. We do have a selection of "amplified loaded enclosures" which you can find here: http://www.sonicelectronix.com/cat_i57_powered-car-subwoofer-boxes.html
Reply · Report · Julia CStaff on Sep 5, 2014
· Add Answer · I Have This Question Too (1)
Would this fit properly in a 2000 dodge Dakota single cab without sacrificing seating room?
A shopper on Feb 17, 2015
Best Answer: Not 100% sure. I mounted mine under the seat of an F-150 bench seat for some thump in the rump.. I used the measurements on the Website & then measured my under the seat clearance. A little tight, but made it. Keep in mind that a Bass Speaker isn't directional, so it doesn't really matter wear it is installed in the cab, as long as it is firing into the Cab. Hope this helped.
Reply · Report · Steve A H on Feb 18, 2015
· Add Answer · I Have This Question Too (0)
I would like to know what the internal volume of the enclosure is ?
Timothy M on Jan 5, 2015
Best Answer: I drive a 89' s10 Blazer. I have my Pioneer paired up with a 300w rms Jensen amp. I am very impressed with the sound quality of my set up. No matter what type of music I listen to it hits hard & clear. It's perfect for me because I don't like my bass to overpower the music. Hope that helps. I do recommend that set up for my friends.
Reply · Report · Brian P on Jan 5, 2015
· Add Answer · I Have This Question Too (0)
Hi I'm planning on ordering the Pioneer TS-SWX2502 with the Pioneer GM-D9601 amp. If I order it with the NVX XKIT42 amplifier wiring kit that is everything I would need to set this system up? Also is 4 gauge wiring to big for this system?If it is what is the next smaller alternative within the NVX kits i should get?
Austin B on Feb 26, 2015
Pioneer TS-SWX2502
Pioneer TS-SWX2502
NVX XKIT42
NVX XKIT42
Pioneer GM-D9601
Pioneer GM-D9601
Best Answer: Hell Austin,

The XKIT42 provides all the basic IMPORTANT parts to install the amplifier. No two installs are alike, so there will always be the chance that you will need a random connection not included. This seldom happens, but plan accordingly to make sure you have access to parts.
In regards to the Power/Ground Wire, the 4 Gauge will insure that the amplifier runs VERY happily throughout the duration of its life. However, the figures you plan on running - i.e. ~400-500w RMS - technically only calls for 8 Gauge OFC, like the NVX XKIT82 .
Reply · Report · Customer SStaff on Feb 28, 2015
· Add Answer · I Have This Question Too (0)
It seems like the Hifonics X200.2 is a pretty good match for this speaker. Is it a good match?
James U on Feb 20, 2015
Pioneer TS-SWX2502
Pioneer TS-SWX2502
Hifonics X200.2
Hifonics X200.2
Best Answer: Hello James,

Yes, this is a good match. The figure match perfectly. Keep in mind, the amplifier will need to be bridged to provide the needed power and matching impedance .
Reply · Report · Customer SStaff on Feb 21, 2015
· Add Answer · I Have This Question Too (0)
Will a Hi Phonics brx1200.1d mono be to much power for that pioneer? And will the box fit behind a standard f-150 cab seat?
Robert b on Jan 13, 2015
Best Answer: Hello Robert,

No, its a perfect match. The SWX2502 is asking for 400w RMS @4ohms, and the amp is providing 450w RMS @4ohms , making it a perfect match.

Unfortunately, we don't have the available dimensions for 'behind a standard F-150 Cab Seat', but you are free to measure the dimensions and compare them to that of the enclosure: 13-7/8"D x 18-5/8"W x 6"H .
Reply · Report · Customer SStaff on Jan 13, 2015
· Add Answer · I Have This Question Too (0)
So I'm new to making my own system and plan on ordering the
Pioneer TS-SWX2502
1200W 10" Shallow-Mount TS Series Single 4 ohm Loaded Enclosure with the Amp being a
Pioneer GM-D9601
1200W RMS GM Digital Series Class D Monoblock Amplifier. Now does it matter what gauge speaker wire I need and do I need RCA cables with this install?Also am i missing anything else i would need to run this set-up?
Austin B on Jan 6, 2015
Pioneer TS-SWX2502
Pioneer TS-SWX2502
NVX XIN25
NVX XIN25
Pioneer GM-D9601
Pioneer GM-D9601
Best Answer: Hello Austin,

You will need far more than just an RCA cable and Speaker Wire. You've got to be able to turn on/off the amp, get power to it, ground it, etc.. The easiest way to accomplish this is by picking up a Amp Wiring kit like the T-Spec V8-8RAK, which will have everything included.
T-Spec V8-8RAK
T-Spec V8-8RAK
Reply · Report · Customer SStaff on Jan 7, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

TS-SWX2502

UPC

884938234832

Weight

19.00lbs

Internal SKU

tsswx2502

Internal Product ID

81224

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pioneer TS-SWX2502