Expert Service 1-877-289-7664 [Hours]

Early Black Friday Sale

JBL JRX212 + XLS1000

A pair of 1000W 12" 2-Way Passive Stage Monitor Speakers and Stereo Power Amplifier

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • Portable 12" 2-way stage monitor loudspeaker system
  • Intended for live performance stage monitoring applications
  • Low frequency driver with a 2.5" edgewound ribbon voice coil
    • Provides additional cross sectional wire area
    • Increases efficiency and power handling
  • 25mm polymer diaphragm compression driver
    • Improves high frequency performance and overall reliability
  • Advanced network topology crossover design
    • Shapes frequency response
    • Delivers coherent summation in the crossover region
  • High voltage capacitors and inductors
    • Massive cores and heavy gauge wire
    • Enable the crossover network to handle high power without saturating
  • Progressive Transition™ high frequency waveguide provides
    • Superior coverage control
    • Reduced distortion
    • Smoother frequency response
  • SonicGuard™ protects the driver from excess power
  • Input connectors:
    • Neutrik Speakon NL-4
    • 1/4" TS phone jack
  • Non-resonant steel handles for easy portability
  • Rugged acoustically superior enclosure
    • Constructed from 19mm (3/4") MDF
  • Dimensions: 12.8"W x 15.7"D x 23"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Specifications

  • Peak Power Handling: 1000W
  • RMS: 250W
  • Frequency Response: 70-19,000 Hz
  • Sensitivity: 99dB
  • Impedance: 8 ohms
  • Maximum SPL: 129dB

Crown Audio XLS 1000

1100W, 2 Channel DriveCore Stereo Power Amplifier
Quantity: 1

General Features:
  • XLS High Performance, Lightweight Class D Amplifier
  • RMS Power Rating:
    • 8 ohms: 215 watts x 2 chan.
    • 4 ohms: 350 watts x 2 chan.
    • 2 ohm: 550 watts x 2 chan.
    • Bridged, 8 ohms: 700 watts x 1 chan.
    • Bridged, 4 ohms: 1100 watts x 1 chan.
  • Integrated PureBand™ Crossover System for better performance and control
  • Peakx Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide outstanding flexibility
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
  • 1-year Manufacturer's warranty
Specifications:
  • Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB
  • Signal-to-Noise Ratio Rated as dBr to full rated 8Ω power output (A-Weighted):
    • XLS1000: > 97 dB
    • XLS1500, XLS2000, XLS2500: > 103 dB
  • Damping Factor (8 ohm) - 10 Hz to 400 Hz: > 200
  • Crosstalk (below rated 8Ω power):
    • At 1kHz: > 85dB
    • At 20kHz: >55dB
  • Input Impedance (nominal): 20 kΩ balanced, 10 kΩ unbalanced
  • Load Impedance:
    • 2 to 8 Ω per channel in Stereo
    • 4 to 8 Ω in Bridge Mono
  • AC Line Voltage and Frequency Configuration: 120 VAC 60 Hz
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
  • Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³)
  • Integrated Processing:
    • PureBand™ Crossover System
    • Crossover Filter: Linkwitz-Riley 24dB per Octave
    • Crossover Frequency Range: 50 HZ - 3 kHz
    • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF)
    • Peakx™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers
  • Input/Output:
    • Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers
    • Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector
    • One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
  • Construction:
    • XLS1000/XLS1500: 8.12-Inch (20.62cm) depth
    • XLS2000/XLS2500: 10.35-Inch (26.29cm) depth
  • Dimensions:
    • EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height.
    • XLS 1000/1500: 7.7-inch (19.6-cm) depth.
    • XLS 2000/2500: 10.7-inch (27.2-cm) depth.
  • Net Weight, Shipping Weight:
    • XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
    • XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
    • XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
    • XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

JRX212 + XLS1000

Weight

105.70lbs

Internal SKU

jrx212_xls1000

Internal Product ID

81297

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL JRX212 + XLS1000