Garage
Shop

JL Audio XD600/1v2

600W RMS XDv2 Series Monoblock Class D Subwoofer Amplifier with High-Speed NexD Switching

JL Audio
Shop all JL Audio
Product videos
highlight-star-icon

• NexD Switching Technology
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Detented, Calibrated Filter Freq. Potentiometer

Learn more about the xd6001v2

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

xdm6001 thumbnail

JL Audio XDM600/1

OUR PRICE: $599.99

View item

Product Highlights


• NexD Switching Technology
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Detented, Calibrated Filter Freq. Potentiometer

Description


JL Audio brand icon

Authorized dealer

JL Audio XD600/1v2

JL Audio XD600/1v2 - XDv2 Series Monoblock Class D Subwoofer Amplifier

This potent monoblock amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD). Targeted specifically for subwoofer applications, the XD600/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. The XD600/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls. Its frequency response is limited to the range below 500 Hz. It is not designed for driving midrange speakers or tweeters. Every aspect of its operation has been optimized for low-frequency amplification.

Advanced Rollback Protection

JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.


NexD Switching Technology

From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed Pulse Width Modulation design approach and enhanced it with a very high switching frequency: 240 kHz, which is about 4x higher than most Class D subwoofer amplifiers. This pushes the amplifier's bandwidth to at least 500 Hz with minimal distortion and improves efficiency, while keeping typically bulky circuity more compact. Your subwoofers will reward you with tight, rock-solid bass. These technologies allow XDv2 amplifiers to achieve efficiencies exceeding 80%, meaning far less heat and strain on your vehicle's electrical system than a conventional large amplifier.

General Features:

  • XDv2 Series Class D Monoblock Amplifier
  • RMS Power Rating @14.4V:
    • 4 ohms: 400 watts x 1 chan.
    • 3 ohms: 500 watts x 1 chan.
    • 2 ohms: 600 watts x 1 chan.
    • 1 ohm: ----------N/A----------
  • RMS Power Rating @12.5V:
    • 4 ohms: 300 watts x 1 chan.
    • 3 ohms: 400 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
    • 1 ohm: ----------N/A----------
  • NexD High Speed Switching Class D Technology
  • Wired HD-RLC remote level control available, sold separately
  • LED power (green), over-current (yellow) and protect (red) indicators
  • Advanced Rollback Protection
  • Dual-Range Differential Balanced Input Section
  • Buffered pass-through preamp RCA outputs
  • Selectable turn-on modes: REM / Offset / Signal
    • +12 V Remote Turn-On: Traditional remote lead wire, from headunit
    • DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
    • Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
  • Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Detented, Calibrated Filter Freq. Potentiometer
  • 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley Crossover
  • Input sensitivity:
    • Low level: 800mV - 8V
    • High level: 200mV - 2V
  • Frequency Response: 7 - 500 Hz
  • Total Harmonic Distortion (THD): <1%
  • Signal to Noise Ratio: >87 dB
  • Damping Factor @4ohms: >1000 / 50 Hz
  • Selectable Infrasonic Filter: Off / 30 Hz
  • Selectable Low-Pass Filter Slope: 12 dB or 24 dB
  • Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave
  • Fuse Rating: 50A x 1 inline (not supplied)
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Weight: 6.30 lb
  • Dimensions: 7.09"W x 8.52"L x 2.05"H
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty
Check out the JL Audio XD600/1v2 Owner's Manual

Product history:

JL Audio XDM600/1 thumbnail
(newest, current model)
JL Audio XD600/1V2 thumbnail
(previous model, replaced by JL Audio XDM600/1)
JL Audio XD600/1 thumbnail
(previous model, replaced by JL Audio XD600/1v2)

This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
400 watts x 1 channel
RMS Power @ 2 ohms
600 watts x 1 channel
Amplifier Specifications
Series
XD-v2 Series
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
600 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<1.0%
Speaker Level Inputs
Yes
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
50 - 500 Hz
Signal-to-Noise Ratio
87 dB
Remote bass/level controller
Optional (Accessory required and sold separately)
Fuse Rating
50A X 1 In-Line Fuse Recommended
Total Fuse Rating
50
Strappable
No
Sonic Certified Amplifier
Not Tested
Amp Bluetooth Connectivity
No
Hi-Res Certified
No
What is in the box?
Paperwork
User manual
WITB: Amplifiers
Amplifier
Adhesive brand badge
Allen wrench
Warranty and Return Policy
Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

XD600/1V2

Weight:

5.67lbs

Internal SKU:

xd6001v2

Internal Product ID:

81604

Product and How-to Videos


Customer Ratings & Reviews



5 star
75%
4 star
25%
3 star
0%
2 star
0%
1 star
0%



Durability
4.8
Value
4.5
Features
4.8
Design
4.8
Usability
4.8

Customer Reviews

Sort by:

Loading...

JL Audio XD600/1V2

The wattage rating on this description is wrong. This amp does 600w in 2 ohms, not 1000w.

I had the JX500 before this amp. The output difference between the two is only 100w, so theoretically you shouldn't be able to hear much difference, but you can. You can feel and hear the difference. If you're heart is set on a JL amp and you can afford the jump in price, the XD line are nice amps.

By Johan on April 22, 2015

38

found this helpful.

Awesome product

Once Sonic Electronic has made me a very happy customer!!!!!!

By Janell on February 17, 2016 Checkmark Icon Verified purchase

29

found this helpful.

JL Audio XD600/1v2

Replaced an older Alpine MRP-M500. It's smaller size made it easier to install. The crossovers/filters and levels are easy to set and access.

By Anonymous on May 9, 2018 Checkmark Icon Verified purchase

23

found this helpful.

Little Monster!

This little amp will get the job done. Have a 12w6v3 H.O. Wedge connected to it and it sounds great. Played it at high volume for at least 45 mins and it barely was warm. Also because of the size you can practically mount it just about anywhere. I have a 2018 300s and cut a piece of 1/4 mdf 10x14 and mounted the amp on top of the spare tire and it fits perfect!

By Ron on April 7, 2018

20

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(36)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(27)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(9)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Products

This item is frequently compared to these items

JL Audio XD-CLRAIC2-SW Speaker Wire to RCA Cable

• 2-Channel Speaker Wire to RCA Adaptor for High-Level Signal Connection to Amplifiers
• Left and Right Channel Male RCA Plugs to Parallel Speaker Cable
• Satin Black Jacket

(6)

$17.99

Related Searches


XD600/1V2 small

Item added to your cart.

Price: $629.99

Essential add-ons
NVX XKIT42

2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$114.99

$99.99

Add to cart
Stinger SK6641

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$189.00

$93.95

Add to cart
Kicker PK4 (46PK4)

4 Gauge OFC Power Amplifier Installation Kit

$169.99

$89.95

Add to cart
JL Audio XD-PCS4-1B

4 Gauge Premium Amplifier Power Connection Kit

$189.99

$189.99

Add to cart
JL Audio HD-RLC

Remote Level Control and Cable for Select JL Audio HD, XD, MHD and M Series Amplifiers

$54.99

$54.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
X Series RCA Interconnect Cable

16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors

$29.99

$18.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon