Expert Service 1-661-257-9993 [Hours]

Audiopipe APCL-3002

1500W Peak (600W RMS) APCL Series Bridgeable 2-Channel Class AB Full-Range Amplifier

In Stock
|
Click for
Special Offer

List price $149.99

You Save: $33.00 (22.00%)

Thanks , You Pay:

$116.99

with warranty

+ FREE Shipping in US 48

Arrives by Friday, Dec. 9 to zip 94107

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Audiopipe APCL-3002

1500W Peak (600W RMS) APCL Series Bridgeable 2-Channel Class AB Full-Range Amplifier

$116.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$13.99
Add Warranty
3 years of protection

Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$19.99

Add
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

$11.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$39.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Audiopipe APCL-3002.

Get FAST answers from customers ASK a Question See questions answers

Bundles with this Product

Limited Offer: 10% off a Belva Wiring + Capacitor Kit!

While supplies last, get an additional 10% off the Belva 1.0 Farad Capacitor with 4 Gauge Amplifier Wiring Kit. This is a 2000 Watt Max Handling Amp Kit that provides the needed juice, flow and wiring for your new amplifier.

4.00

81639

1647

Audiopipe APCL-3002

$116.99

+

10% OFF

Belva 1.0 Farad Capacitor + Belva 2000 Watt Max Handling Amp Kit

$39.99

Special Price $35.99 ($39.99 if purchased separately)

Belva 1.0 Farad Capacitor + Belva 2000 Watt Max Handling Amp Kit

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• 1.0 Farad Capacitor
• Designed Specifically For Car Audio Systems Up to 1000 Watts RMS (2000 watts MAX)
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 30% Copper CCA Wire
• Perfect for Systems up to 1000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

Save 25% on a 4 Gauge Amp Kit with Purchase!

Need a wiring kit to install your amp? The TruConnex TC4KIT-84B is your answer. For a limited time, when you click "Add Both to Cart", get 25% off the amp kit. You may still need Speaker Wire, so make sure to check that out too!

7.50

81639

294

Audiopipe APCL-3002

$116.99

+

25% OFF

TruConnex TC4KIT-42B by Metra

$29.99

Special Price $22.49 ($29.99 if purchased separately)

TruConnex TC4KIT-42B by Metra

• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 900 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

(Offer 1 of 2)

Combined Total Price

$152.98

You Save $4.00

Audiopipe Car Audio Store


Quality without the Cost

The Audiopipe Consumer Line series amplifiers were reengineered from the ground up in 2012 to provide plenty of high quality power for even the highest end sound system while keeping their footprint as compact as possible. Audiopipe didn’t skimp on the internals of these amps, the Consumer Line features the finest in electronic protection circuitry to protect against harmful short circuits, thermal overloads and overheating. These premium choice amplifiers are sure to impress.

Oversized Toroids for Better Sound

Oversized Toroids for Oversized Sound

The Consumer Line amplifiers are built with performance in mind, and a quick look under the hood of these amplifiers reveal oversized toroids. These toroids (basically just wire coils) help to regulate the voltage in the amplifier. By overbuilding them, Audiopipe ensures that every CL series amp puts out even, consistent power for the best possible sound, and the longest life from your components.

Outstanding Heat Dissipation

The Finest in Heat Dissipation

When redesigning the Consumer Line series, Audiopipe took great care in designing an amplifier that would not overheat. These amps feature a high quality aluminum heat sink with cooling fins running along each side and grills embedded in the top plate to ensure outstanding heat dissipation and prevent any unwanted heat related shutdowns.

Speaker Level Inputs

High Level Convenience

Audiopipe’s multi-channel Consumer Line amplifiers feature high level inputs (or speaker level inputs) to allow much simpler installations. High level inputs eliminate the need for RCA cables and line output converters by picking up the audio signal directly from the speakers in your car. They are ideal for use with factory radios that do not have RCA outputs to run amplifiers.


General Features:

  • Audiopipe APCL Series APCL-3002
  • Class-AV FullRange 2-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 150 watts x 2 chan.
    • 2 ohms: 300 watts x 2 chan.
    • Bridged, 4 ohms: 600 watts x 1 chan.
  • Total power output: 1500 watts
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • 2 or Mono channel operation
  • Speaker-level (high-level) inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Input sensitivity:
    • Low level: 600mV - 8V
    • High level: 200mV - 8V
  • Frequency Response: 20 - 20,000 Hz
  • Total Harmonic Distortion (THD): 0.05%
  • Signal to Noise Ration: >95dB
  • Selectable crossover modes: LP / HP / OFF
  • x1 / x10 crossover frequency multiplier
  • Variable crossover filter: 55 - 550 Hz (x1) / 550 - 5500 (x10)
  • Variable Bass Boost: 0 to +15 dB bass boost at 45 Hz
  • Fuse Rating: 25 A x 2
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 7"W x 15"L x 2.2"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

What's in the Box?

  1. APCL-3002 2-Channel Amplifier
  2. Wired Remote Bass Level Control
  3. High Level Input Adapter
  4. User Guide

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

150 watts x 2 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

300 watts x 2 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

600 watts x 1 channels

Power Specifications - Full Range Channels

Peak Power @ 4 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

375 watts x 2 channels
Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

750 watts x 2 channels
Bridged Peak/Max Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

1500 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Consumer Line (Audiopipe)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1500 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Any Gauge with use of Spade Terminal AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.05%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

55 - 5500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

55 - 5500 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>95 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 15 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 2 

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0
Edrick

Puerto Rico

Overall
Durability
Value
Features
Design
Usability
Awesome amp!!

November 9, 2014

My friend recently bought this amp to put 4 Audiopipes-65FLT in 4ohms and bridge then in 2ohms..they sound great..clear and loud music that he wanted..and best of all thisd amp its CEA-Compliant!! and for the price..man go get it!!

11 of 13 found this helpful

Was this review helpful to you?

tlries

Chicago, Hgts , il

Overall
Durability
Value
Features
Design
Usability
Great value

July 15, 2016

I love this amp, had a kicker of course u pay heafty prices, audio pipe hits just as hard or harder, but for half the cost, same quality. It does not shut off, they have a cooling inside, which helps with overheating, it takes a beating, and still keeps going. I have to cars I ordered another for my second car. I stand by audio pipe.

0 of 0 found this helpful

Was this review helpful to you?

Aaaalvis

Dallas, TX

Overall
Durability
Value
Features
Design
Usability
Damn solid amp.

December 14, 2015

Decided to spend a little more after my second Planet Audio amp crapped out on me. Not trying to douche their brand or anything like that, but like a million other people have said a million other times.......... you get what you pay for. Indeed, damnit.

Soooooooooo........ yeah, I opted to spend a little more instead of buying the same amp for the third friggin' time and I'm glad I did. The Audiopipe amp is awesome and I would definitely recommend it. Solid, clean as hell bass response, cool controls/adjustments (frequency X10 multiplier and switch between stereo/mono/bridged modes - especially are a nice, unique touch) and it's cool that they decided not to use one of those dinky-ass phone cords to connect to the gain control remote knob that you mount under the dash. Housing/construction of the knob and the amp itself is solid and sturdy, as well.

All in all, it's a damn solid amp.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

Your Price $19.99

Belva Amp Kit + 2.0 Farad Capacitor

Complete 0/1 Gauge Amplifier Wiring Kit + 2.0 Farad Capacitor

Your Price $74.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

Your Price $11.99

Kicker Q-Series RCA Interconnect Cable

16.5 ft. of 2-Channel Interconnects with twisted pair conductors, K-cut gold plated contacts, and hyper-flex technology for easy installation!

Your Price $44.95

NVX XIX25 X-Series Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $14.99

4000 Series 2-Channel RCA Cable

17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile

Your Price $16.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

Your Price $72.99

Kinetik HC600-BLU

BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

Your Price $49.99

XS Power D545

12-Volt Deep Cycle AGM Power Cell with 800 Max Amps

Your Price $109.99

NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

Your Price $59.99

Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

Your Price $21.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

Your Price $2.99

Pair of 8 Gauge Spade Terminals, #8 Opening

Spade Terminals • 8 Gauge • 1 Red & 1 Black • Nickel Plated

Your Price $2.49

Pair of 10 Gauge Spade Terminals, #8 Opening

Spade Terminals • 10 Gauge • 1 Red & 1 Black • Nickel Plated

Your Price $1.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $26.99

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $74.99

Browse 2 questions and 4 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
good product
terrell m on Sep 9, 2015
It's what my son asked for for Christmas
Sherri G on Dec 18, 2014
I was recommended by a friend. It is a cheap amp with more than enough power for the 4 Audiopipe APMB-6SB speakers I also bought. If the time comes that i'd like to buy 4 more of them I would be able to add those to this amp as well and in essence double my vocals
Anthony P on Feb 25, 2015
can I add warranty anytime on a product?
A shopper on Nov 10, 2014
Best Answer: Hello,

Not necessarily, we allow Up to 30days after the date of purchase to add warranty to the product in question.
Reply · Report · Customer SStaff on Nov 10, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

APCL-3002

UPC

784644415962

Weight

9.40lbs

Internal SKU

apcl3002

Internal Product ID

81639

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Audiopipe APCL-3002

  • Audiopipe APCL Series Car Amplifiers | Product Overview
  • How To Install an Amplifier: Car Amplifier Basics Part 2