Garage
Shop

AudioControl LC6i

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

highlight-star-icon

• Six Speaker Level Inputs – Can Accept 400 Watt Signals!
• GTO™ Signal-Sensing Input
• Internal Channel Summing
• Line Output Converter

Learn more about the lc6i-white

We apologize

This item has been discontinued

Description


AudioControl brand icon

Authorized dealer

  NVX XLOC66X
NVX
XLOC66X
LC6i

Audiocontrol
LC6i
Price $129.99 $149.99
Load Selection Switch
Variable Remote Turn-on
 Ground Isolation Switch
9.5 Volt RCA Outputs
12-volt turn-on lead output
Low-Pass Filter & Bass Boost
Remote Bass Knob Included
Led Clip Indicator

 


For over two decades, AudioControl has been designing and manufacturing award-winning autosound products at our factory located in the rainforests of the Pacific Northwest. During this period, countless sound-off winning contestants have chosen AudioControl products to give them the competitive edge. "Can you really win without AudioControl", was part of an article written commenting on competition winning systems. Nothing sounds better than an awesome recording played back on a kickbutt system. Unfortunately, the acoustics of your vehicle can take away from your systems performance. While AudioControl products do not change the laws of physics (although they act like they do), autosound enthusiasts have long known that AudioControl products "make good stereo sound better".

LC6i - 6 Channel Line Out Converter

AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing. The LC6i is built on the same technology as its predecessor, the LC6. The LC6i converts speaker level inputs from a factory radio or factory amplifier into high-quality pre-amp signals. The addition of internal summing capabilities and improved GTO signal-sense turn-on make the LC6i the perfect way to solve your OEM headaches.

The LC6i allows for the addition of aftermarket processors and amplifiers while maintaining use of the factory volume and steering wheel controls. Internal signal summing and AudioControl's new GTO™ signal-sense turn-on make the LC6i a perfect OEM interface for a performance audio system.

The LC6i follows in the steps of the rampantly successful LC8 Eight Channel Line Output Converter, offering all of the same features for 6 channel systems at a reduced price. The LC6i accepts speaker level signals, both crossed-over and full range, and converts them to high-quality pre-amp signals. Signals from factory radios with built-in crossovers can be overcome by summing them together, internally, to provide a full-range preamp signal.

The LC6i provides the type of clean pre-amp signals installers are familiar with. Those who desire custom control over the sound can easily add one of AudioControl's many crossovers or equalizers which offer unlimited system design flexibility, clearly different than traditional OEM interfaces.

Key Features:

Speaker-Level Inputs:

If you are like many people who enjoy the look and features of your factory-installed source unit but feel your system overall is lacking power and bass, we have good news. The LC6i has high-impedance speakerlevel inputs that allow it to accept amplified signals from all known factory-installed source units (even Bose) and output a high-quality pre-amp signal via standard RCA connectors. This will allow you to add better-quality aftermarket amplifiers, processors and speakers while keeping the convenience features of your factory-installed source unit. Unlike inexpensive speaker-level and line-output converters, the LC6i offers the highest sound quality and can handle the full signal strength of a 400-watt amplifier.

GTO™ Signal-Sensing Inputs:

Most factory-installed source units lack the features that make it easy to upgrade with really good-sounding, performance aftermarket products. One of those key features is a 12-volt trigger that will turn on devices like the LC6i and your external amplifiers. Therefore, we have equipped your LC6i with our unique GTO™ (Great Turn On) signal-sensing inputs. Once the GTO input of your LC6i detects a speaker-level signal on the Main Inputs, it powers up. When the speaker-level signal goes away, your LC6i will automatically turn-off. Optionally, your LC6i is also equipped with a standard 12-volt trigger (Remote In) that will allow you to turn on your LC6i in the traditional manner.

12-Volt Output Trigger:

Since you will be using an external amplifier(s) and processor in your system, you will need the ability to "trigger" or turn-on these devices (a romantic dinner won't quite work here). Your LC6i has a high-current 12-volt output (labeled Remote Out) that will provide a trigger to these remote devices, when the LC6i is powered up. Please note that this output is not to be used as the main power for these devices.

Internal Channel Summing:

The LC6i has the unique ability to internally sum together multiple (4 or 6) input channels from the factory source unit into 2 channels. This is particularly handy when using the LC6i with a factory system that has multiple, actively crossed-over signals being sent from the OEM source unit or amplifier(s). For example, in some vehicles there is an actively crossed-over tweeter, midrange, and woofer all in the front of the vehicle. The LC6i lets you take all of those signals and sum them together to get a high-quality, full-range, pre-amp signal without the use of any additional cables or hardware.

AutoMode Inputs:

Sometimes in life (and car audio) we need more outputs than inputs. Therefore we have equipped your LC6i with AutoMode inputs that take the Channel 2 signal and automatically feeds it to the Channel 3 outputs, provided there is no signal present on the Channel 3 inputs. This means your LC6i will accept two input channels and give you four output channels. Or it can accept four input channels and give you six output channels.





AudioControl
LC2i
AudioControl
LC6i
AudioControl
LC7i
AudioControl
LC8i
AudioControl
LCQ-1
AudioControl
DQ-61
Your
Price
$99.99 $149.99 $189.99 $249.99 $299.99 $399.99
Line Out Converter 2 Channel 6 Channel 6 Channel 8 Channel 6 Channel 6 Channel
High Level Inputs
GTO™
Channel Summing
AccuBASS™
Remote Included
Auxiliary Input
Equalizer
Signal Delay
Input Level Control


General Features:

  • Six Input and Output Channels
  • 6 Speaker Level Inputs - Can Accept 400 Watt Signals!
  • Signal sensing inputs
  • Internal Channel Summing
  • AutoMode inputs
  • Level matching controls
  • 12 volt trigger output
  • Line Output Converter:
    • A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal
  • Input for optional subwoofer level control: AudioControl ACR-1
  • Color: Sierra White
  • Also available in Salmon Gray: AudioControl LC6I Gray
  • Weight: 3.5 lbs
  • Size: 8.00" W x 6.00" D x 1.20" H
  • Authorized Dealer
  • 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer)

LC6i Specifications:

  • Maximum speaker-level input: 400 watts @ 4 ohms
  • Maximum output level: 9.5Vrms
  • Output gain: ±12 dB
  • Frequency response: 10Hz-22kHz
  • Total harmonic distortion: 0.01%
  • Input Impedance: 20 Kohms
  • Power supply: High headroom PWM switching
  • Power draw: 200mA
  • Recommended fuse rating: 1 Amp
  • Remote Trigger Ouput Current: 1 Amp


Check out the AudioControl LC6i Owner's Manual

Specifications & Details


Line Out Convertor Specifications
Number of Channels
6-Channel
Warranty and Return Policy
Parts Warranty Duration
5 years
Labor Warranty Duration
5 years
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

LC6i-WHITE

Weight:

4.00lbs

Internal SKU:

lc6i-white

Internal Product ID:

8168

Customer Ratings & Reviews



5 star
83%
4 star
17%
3 star
0%
2 star
0%
1 star
0%



Durability
4.9
Value
5
Features
4.7
Design
4.7
Usability
5

Customer Reviews

Sort by:

Loading...

Excellent Product!

This unit is great for people that don't want to change factory head unit. The product works great. No noise in system, very flexible. The auto remote turn on feature is a great feature. You don't have to run a remote turn on lead. The flexibility to sum channels and the auto signal to the third port is very nice too.
All around excellent product. Highly Recommended!

By Troy on June 25, 2014

30

found this helpful.

Mr

Great way to keep factory look and keep it discreet,professionally installed

By ruben on December 18, 2014

29

found this helpful.

Does the job

Nice bit of kit. Treat yourself to the remote control too. Much nicer to control sound from the front of your car.

By Pez on February 12, 2013

29

found this helpful.

Expensive, but.

It's not cheap, but works very nice. Hasn't quit on me yet!

By Gage on June 27, 2012

29

found this helpful.

amazing

Very good sound quality. I dont know if its the best out there coz i've never tried anything else. The price is really good though.

By Hardeep_Manmeet on July 7, 2011

28

found this helpful.

A MUST for my new install...

I purchased a brand new Santa Fe Sport and figured I would just hook up my 5-channel amp and my subs and everything would sound great...I was wrong! The subs were playing FULL RANGE, the left side was louder than the right, and the factory radio only had basic fader and tone controls (BASS/MIDDLE/TREBLE) that did nothing to help. A friend of mine has the JL Fix 86 in his car and suggested an LOC. I knew AudioControl from back in the day and picked up one of these units to see if it would do what I needed at a fraction of the JL's price. Consider me impressed. I jumpered the summing circuit and set the gains/output just like the manual recommended, and now I can say I have quality tunes in my new ride! Don't waste your money on features you don't need or low-quality Wal-mart LOCs, this unit hit the sweet spot for me. Easy to install (love the GTO circuit and the 12V output to the amp, one less wire to run), easy to adjust, and sounds great.

By kjbad on July 1, 2017

5

found this helpful.

Similar Products

Best selling similar products

Hifonics HFEQ-2

• ½ DIN ISO mount included, this can be installed right in the dash of your vehicle
• Audio input selector for switching between the head unit and another source
• Input level controls for both car radio and any media device to ensure identical volume levels
• Master volume control of the SPL-level for both sound sources
• Front to rear dual-amp fader

$59.99

Cerwin-Vega EQ-770

• 7-Band Graphic Equalizer with Auxiliary Input
• Red illumination
• Master and subwoofer volume control
• Subwoofer frequency and level control
• Built-in fader control

(1)

$89.99

DS18 EQX7

• 7 band-Band Graphic Equalizer
• Sets of preamp outputs (front, rear and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

$67.96

Memphis EQL7

• 7-Band Digital Equalizer
• 3 Sets of 8V Preamp Outputs
• Signal-to-Noise Ratio: 96dB

$119.95

Memphis SXEQ7

• 7Band Parametric EQ
• Low noise BI-FET op-amp design
• Provides up to 6.5 Volts of output
• White LED back-light
• Universal 1/2 DIN chassis

$159.95

Related Searches


LC6i-WHITE small

Item added to your cart.

Price: $149.99

Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon