Expert Service 1-877-289-7664 [Hours]

Spring Closeout Sale

Rockford Fosgate Power T600-2

600W RMS Power Series Compact 2-Channel Amplifier

Available. Ships at Later Date
|

List price $649.99

$499.99

with warranty

You Save: $150.00 (23.08%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Available

Ships at Later Date

  • Power Series Compact 2-Channel Amplifier
  • RMS Power Output:
    • 4 ohms: 200 watts x 2 channels
    • 2 ohms: 300 watts x 2 channels
    • Bridged, 4 ohms: 600 watts x 1 channels
  • CEA-2006 compliant
  • Dynamic Thermal Management cooling system
  • Differential Input circuitry eliminates hum
  • Variable high- and low-pass filters (50-500 Hz, 24 dB/octave)
  • Variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
  • Optional remote bass/treble boost
  • Class AB amplifier design
  • MOSFET power and output stages
  • Preamp inputs and outputs
  • 4-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
  • No on-board fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and the amplifier is recommended
  • Frequency Response: 20 Hz - 20 kHz
  • Dimensions: 9-5/8"L x 13-11/16"W x 2-3/16"H
  • 1-year SonicElectronix.com warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 2 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

300 watts x 2 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

600 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Power (Rockford Fosgate)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
Full (AP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 500 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
85 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Optional (Accessory required and sold separately)
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
92%
4 Star
0%
3 Star
8%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.5
Features
4.6
Design
4.8
Usability
4.6

Victor

Lawton, OK

Overall
Durability
Value
Features
Design
Usability

I love this amp!!!!

November 23, 2013

You can't go wrong with Fosgate. This is the best amp I've ever had. It's pushing 2 12 inch Fosgate P2's and it sounds great. I wired at 4 ohms with the gain at around 70% and it's still loud.

0 of 0 found this helpful

Help our customers find the most helpful reviews

hoople

Hedgesville, WV

Overall
Durability
Value
Features
Design
Usability

Quality

September 23, 2013

I bought one of these T600-2"s for my T1D210 woofer. It's sturdy and handles power output like a pro. I've run her continuously for over 14 hours, several times, and no issues whatsoever. If this amp meets the requirements for your gear, I'd highly recommend it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

glk_30sf

CT

Overall
Durability
Value
Features
Design
Usability

T600-2 for my wife

September 17, 2013

This is a solid amp - I wish I had the money for another one for my car. My brother let me borrow his and then wanted it back. I got this one from Sonic Electronix for my Wife's truck and it is solid

0 of 0 found this helpful

Help our customers find the most helpful reviews

Cadillac

Spring Hill, FL.

Overall
Durability
Value
Features
Design
Usability

Get you some!

March 18, 2013

this thing is a power house. Definitely worth every penny. I have mine on a temporary set up. Originally bought to power some components, but needed some kind of bump till everything is bought. So for now it's powering 3 RE Audio 8" subs to there max! I have all stock electrical and I. Get just a bit of headlight dimming at idle. The description says minimum impedance bridged is 4 ohm. It's actually 2 ohm, check Rockford's website. All my amps are Rockford, nothing else will do!

0 of 0 found this helpful

Help our customers find the most helpful reviews

southpaw

Tylertown, MS

Overall
Durability
Value
Features
Design
Usability

outstanding performance

December 20, 2012

The performance, look, size and it fits under the seat of my Nissan Versa with room to spare. It runs cool and has plenty of power. Not a hint of hot spots. This amp runs two P3 15 and does not even flinch. I have them wired in stereo @ 2 ohms per channel. If you need around 400 watts per sub please consider this amp. No regrets here, as I always say if you like it, buy it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jdallas

southern Il.

Overall
Durability
Value
Features
Design
Usability

great amp!

February 7, 2012

I got this amp from a buddy that had one pushing two type r 12s and his system slammed! It was perfect for the type r's. i took it and put it on two kenwood shallow excelon 12's and it isnt as loud but i also am very limited on space. For what it is it sounds very good. I've never had any problems with this amp. No over heating or anything. Straight power!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Braden

Canada

Overall
Durability
Value
Features
Design
Usability

First car audio amp.

June 19, 2011

Needed an amp to power my 2 MTX TR7510-44 subs and "Wow" does it do the job! I heard a lot of good stuff about Rockford Fosgate products and all the positives were true. Any one who is in need of a two channel amp with around 375 RMS each channel at 14.4volts will greatly appreciate this products!

0 of 0 found this helpful

Help our customers find the most helpful reviews

ello

Virgin Islands (British)

Overall
Durability
Value
Features
Design
Usability

great value

December 3, 2010

Great product very power full

0 of 0 found this helpful

Help our customers find the most helpful reviews

ello

Virgin Islands (British)

Overall
Durability
Value
Features
Design
Usability

great value

December 3, 2010

Great product very power full

0 of 0 found this helpful

Help our customers find the most helpful reviews

Joseph

Lakeland, FL

Overall
Durability
Value
Features
Design
Usability

Same 'ole Rockford top notch quality

May 21, 2010

This amp is an absolute beast! It puts out way more than what it is rated at. It's sleek and shiny design is unmatched and looks extremely clean. The terminals for the power and speaker wire is nice and easy to use, requiring few tools for beginners or do-it-yourselfers. Allows for countless configurations and setups.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Acid

peoria, AZ

Overall
Durability
Value
Features
Design
Usability

fosgate T600-2

December 1, 2009

In the six months I owned this amp it has been very good product if power is what u want then this fosgate got it 700rms as tested and it pushes it all. Its easy to install and very friendly with the gain, frequency, and even equalizer. very good product in very happy with this purchase.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Big M

Canada

Overall
Durability
Value
Features
Design
Usability

This amp is pure power!

October 15, 2009

I have this amp hooked up to 2 audiobahn 12" subs in a sealed box, and man it is one of the loudest systems I have heard without a word of a lie! Birthsheet says it is actually pushing close to 400 watts RMS per channel. I love the looks of the new rockford amps as opposed to the previous year as well. This amp is well worth the money and a great value from sonic e.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Silverfixation

Austin, Texas

Overall
Durability
Value
Features
Design
Usability

Handsome, but lame!

January 21, 2011

Not a very good amp. I had mine running a single Kicker CVX 12, it was sufficient power but the thing overheated all the time. You cannot run this amp at full power for more than about 30-45 seconds. Its also way too power hungry for a 600 watt amp. Overall I would not recomend this item to run any subwoofers at all, and actually I would not recomend Rockford amps they are way over rated, over priced, and poorly made.

0 of 4 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Rockford Fosgate RFK4X 4 Gauge Amp Kit

Get a matching Rockford Fosgate wiring kit for your new Rockford amplifier!

Your Price $79.99

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

Your Price $11.99

Kicker Q-Series RCA Interconnect Cable

16.5 ft. of 2-Channel Interconnects with twisted pair conductors, K-cut gold plated contacts, and hyper-flex technology for easy installation!

Your Price $32.95

NVX XIX25 X-Series Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $29.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

Your Price $149.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-104

The ultimate amplifier level setting disc used for evaluation of audio components

Your Price $11.99

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $12.99

Items we think you might want

T400-4 thumbnail

Rockford Fosgate Power T400-4

• 60W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 200W x 2 chan. @ 4 ohm
• 400W x 1 chan. Max
• MOSFET Power Supply
• High-pass and low-pass crossover
• Audiophile grade speaker connections

Your Price $399.99

T400-2 thumbnail

Rockford Fosgate Power T400-2

• 4 ohms: 120 watts x 2
• 2 ohms: 240 watts x 2
• Bridged, 4 ohms: 400 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

Your Price $399.99

T600-4 thumbnail

Rockford Fosgate Power T600-4

• 100W x 4-Chan. @ 4 ohms
• 150W x 4-Chan. @ 2 ohms
• 300W x 2 chan. @ 4 ohms
• 600W x 4-Chan. Max
• NOMAD protection circuitry: thermal, overload or short protection
• MOSFET power supply

Your Price $599.99

Product Summary

Manufacturer

Model Number

T600-2

UPC

780687324476

Weight

12.00lbs

Internal SKU

t600-2

Internal Product ID

8894

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate Power T600-2