Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Rockford Fosgate Power T600-4

600W Power Series Compact 4-Channel Amplifier

In Stock. Only 1 Left!
|

List price $629.99

$599.99

with warranty

You Save: $30.00 (4.76%)

Arrives by Wednesday, July 30 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Wed, July 30

  • Power Series 4-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 100 watts x 4 chan.
    • 2 ohms: 150 watts x 4 chan.
    • Bridged, 4 ohms: 300 watts x 2 chan.
  • Max power output: 600 watts x 4 chan.
  • MOSFET power supply
  • Remote bass level input (remote level control sold separately)
  • LED power, thermal, power indicators
  • Tuned Bass EQ (0-18 dB bass boost at 45 Hz)
  • 4/3/2 channel operation
  • Preamp RCA outputs
  • NOMAD protection circuitry: thermal, overload or short protection
  • Cast-aluminum convection cooling
  • Variable high-pass filter (50-500 Hz, 24 dB/octave)
  • Variable low-pass filter (50-500 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20000 Hz
  • Dimensions: 14.91" L x 8.14" W x 2.14" H
  • 4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • 1-year SonicElectronix.com warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

100 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

150 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

300 watts x 2 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

600 watts x 4 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Power (Rockford Fosgate)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

2400 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
2 pairs
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 500 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
85 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Optional (Accessory required and sold separately)
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.8
Features
5.0
Design
5.0
Usability
4.9

Robert

Canada

Overall
Durability
Value
Features
Design
Usability

Insanely amazing Amp!

June 16, 2014

I stand behind Rockford Fosgate amps 100%. Flawless quality and build design. These amps take a beating. The birth sheet that came with this and the Power T1000-1bdCP were both rated 25% higher than the actual spec of the amp!!! Most manufacturers barely meet the advertised one. Buy this amp and don't hesitate to do so!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Amir Designer

Los Angeles,TT,TEH

Overall
Durability
Value
Features
Design
Usability

very good 4 channel amp

May 11, 2014

i listen music with this amp in 3 systems: 1. alpine 305 headunite,rockford fosgate t1652s component,rockford fosgate t600.4 amp,alpine m1005 monoblock and alpine 12" type r subwoofer. 2.alpine 9835 headunite,JBL p6563 component,rockford fosgate t600.4 amp,soundstream rub1.1000 monoblock,JL audio 12W3V3 subwoofer. 3.Alpine 9887 headunite,alpine spx-17pro component,rockford fosgate t600.4 amp,rockford fosgate T1000 monoblock,alpine swx-1243d subwoofer. i can say that this amplifier suitable for all of component speaker and best for SQ systems.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Mark

Charlotte, NC

Overall
Durability
Value
Features
Design
Usability

Awesome Amp

November 30, 2013

As with all of the Rockford Power line this amp is awesome. The power output is quite amazing. The birth sheet says that it is rated at about 1000 amps at 14.4v and I believe it. I haven't pushed it very far. Using it for some Rockford 6.5's and 6x9's. Good stuff.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Marc

California

Overall
Durability
Value
Features
Design
Usability

Clean Power-Efficient

November 10, 2013

The T600 performs solid. Runs cool. Reliable clean power. Trusted brand.

0 of 0 found this helpful

Help our customers find the most helpful reviews

David

Salisbury, NC

Overall
Durability
Value
Features
Design
Usability

Rockford Fosgate Power T600-4

October 21, 2013

Really good AMP for the money. Super clean sound. I have it hooked to 4 Infinity Kappa 6x9's and it is crystal clear and EAR BUSTING LOUD! A++ on this one. I'll rate this in the top 3 of the 25+ amps that I've owned over the past 30 years. YEP, I'm an old guy and still rockin'. Get this AMP you will not be disappointed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Carl

Seattle, Wa

Overall
Durability
Value
Features
Design
Usability

Nice little powerful amp

September 20, 2013

Compact, clean and powerful amplifier. I used it to drive some old 6.5 MB Quarts and a twelve inch sub in my recently back on the road 67 Buick Riviera. The car had been off the road for many years and I had stolen the four channel Mcintosh out of the Buick while it was sitting for another car so I needed a replacement. I am partial to the Mcintosh amps and have them in several cars but I was not disappointed by the power of this RF.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Marty

Sierra Vista, AZ

Overall
Durability
Value
Features
Design
Usability

Great Amp from a Kicker Amp Fan

April 22, 2013

System this amp is servicing: A mustang car: Fronts 6.5 component set, Focal 165 KRX2, which are 2 ohm each side, rated at 100 w rms each side. Rears, Polk MM571, 2.7 ohms each, and are rated at 90 w rms. Previous amps: Kicker IX500.4, Kicker ZX650.4. Kicker ZX650.4 is just as good as this amp, but it's 20 inches long. This RF T600-4 (just under 15 inches long, which is the reason for purchase) is a little bit stronger, sounds almost as good (Kicker has better noise filtering). Noise filtering is the weak point in this amp. It's not much engine noise, mind you, but it's there. Fortunately, the amp is too strong for my speakers, so I can almost, almost eliminate the noise but turning the gains down lower than the SMD-1 (great device by the way I purchased here at Sonic) calls for them to be at. I have learned its best to get a too strong amp and you can always turn the gains down lower than they should be, rather than too weak of an amp, and turn gains up beyond where they should be. I also do NOT use any bass boost. Overall, great amp, very pleased. My specs on this amp's birthsheet: 122 x 4 @4 ohms, 189 x 4@2 ohms, 379 x 2@4 ohms

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tony

Honolulu, HI

Overall
Durability
Value
Features
Design
Usability

Great amp for speakers.

December 11, 2012

The brand alone is worth buying, Rockford quality with amps is impressive. Ab class goes effectively with the T3s pairs I have running, sounds crisp and loud!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jeremy

AsheboroAsheboro, NC

Overall
Durability
Value
Features
Design
Usability

Rockford Fosgate T600-4

March 24, 2012

This amp is freaking awsome! The one I have, the birth sheet has it rated at 227 x 4 @ 2 Ohms thats 127 watts over what it is rated, wow. This amp is powering a set of T2652-s 6.5" components and 1 additional set of T2T-s tweeters, along with 2 - T1693 6 x 9's. This is an excellent buy for anyone.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Matthew

Australia

Overall
Durability
Value
Features
Design
Usability

Best 4CH amp on the market

January 17, 2012

My amp came with a birthsheet stating 130wrms x 4 CH @ 4ohm. Which is awesome. Sounds clean and crisp with the RF T2 splits.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Buffalo, NY

Overall
Durability
Value
Features
Design
Usability

Rockford Fosgate

December 20, 2011

Great amp! The sound (loudness and quality) is great! All I could have expected. Great over the phone technical installation support from the supplier!

0 of 0 found this helpful

Help our customers find the most helpful reviews

michael

austin, tx

Overall
Durability
Value
Features
Design
Usability

I am happy.

November 15, 2011

I purchased this amp along with the rest of my gear at the same time Rockford Fosgate type-(T1652-S, R1653 and P1S4-10). The whole package in my 2011 Chevy Truck is CRYSTAL CLEAR. The Sub Bumps nice and tight. SOLID piece of Gear. GOOD Bang Power Clarity for my setup.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tom

Indianapolis

Overall
Durability
Value
Features
Design
Usability

Great sound, plenty of power

November 6, 2011

I love this amp! I had a JL Audio 300/4 v.1 prior to buying this amp. Actually I had 2 JL's and they both went bad. Decided to get a Rockford and never have regretted it. Very dependable, doesn't overheat when I drive it really hard. I have CDT speakers and they demand watts and the Rockford 600-4 delivers. Noticed that the Rockford sounded so much better than the JL. I cannot understand it, but it is what it is. Buy Rockford, you will never regret it. Oh, by the way, I've had the 600-4 for a year and half and it just keeps crankin out the music, no problems. I like the phillips screws for wire connections. You'd be crazy to buy anything else!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Al

Montrose, Colorado

Overall
Durability
Value
Features
Design
Usability

Yea this is the one!!

August 28, 2011

T-600 great amp powerful and delivered just like they said. Only problem for myself matching 6x9 or bigger I melted all voice coils. I want to buy most powerful RMS speakers 4 pairs and add T-1000/4.

0 of 0 found this helpful

Help our customers find the most helpful reviews

UrbanRogue

Canada

Overall
Durability
Value
Features
Design
Usability

Great Amp!!!

July 14, 2011

I switched from my Alpine 4 channel to this bad boy. This amp is the best component amp you can buy. Mine came rated at over 140 watts per channel at 4 Ohms. Had to turn the gain down to not blow my speakers. Amazing amp, worth every penny. Trust me, you will not be disappointed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Alfredo

Montebello, CA

Overall
Durability
Value
Features
Design
Usability

Awesome

March 8, 2011

Out of the box the spec sheet included said this amp was rated at 133 watts RMS at 4 ohms, tested in Dec of 2010. Awesome... more power just like that! Get some good speakers that can handle the juice. I have Rockford Fosgate T2652-S components in my front doors and I bridged the rear channel to power my 10" JL Audio sub in the trunk. I couldn't be happier with how great everything sounds. Nice, clean stable power is what you get with this amp. I also got the Punch remote hooked up to this amp so I can make adjustments from the front seat. The adjustments this remote makes is more like a fine tuning. This amp feels heavy and actually smaller than I imagined for getting so much power out of it. Would def recommend.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Keithley

Virgin Islands (U.S.)

Overall
Durability
Value
Features
Design
Usability

Great Product

October 12, 2010

This amp is a work horse in a small chassis would recommend to anyone looking to get that edge in sound quality and power..... Great buy

0 of 0 found this helpful

Help our customers find the most helpful reviews

Isaac

Mohave Valley, AZ

Overall
Durability
Value
Features
Design
Usability

Awesome amp

August 12, 2010

This is one of the best amps I have ever owned. Stands up to everything I can throw at it and never backs down. Great piece of equipment and puts out way more power than rated. Mine out out over 150 watts per channel at 4 ohms and over 250 watts at 2 ohms.

0 of 0 found this helpful

Help our customers find the most helpful reviews

ryderonthestorm

Mohave Valley, AZ

Overall
Durability
Value
Features
Design
Usability

Amazing Amp!

February 22, 2010

This amp is the best component amp you can buy. Mine came rated at over 150 watts per channel at 4 Ohms. It quickly blew one of my Rockford Power 6x9's! Rockford is gonna have to come up with some more powerful speakers or else I'm liable to blow all my components lol. Amazing amp, worth every penny. Trust me, you will not be disappointed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Phill

MI

Overall
Durability
Value
Features
Design
Usability

compact

July 23, 2009

This is a sweet and small amp (for the real output). Well over 100 watts at 12 volts, I tested it (my birth sheet says 131 at 14.4 volts) not to many manufacturers can say that they even have one four channel that can do that, Rockford has a few and as always the quality you have come to expect from Fosgate. this thing will surprise you with its weight. The value is there, the performance is there, if you are thinking about stepping up to a real 4 ch. then do not overlook this one.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT44 4-Gauge 4-Channel Wiring Kit

4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $99.99

Rockford Fosgate RFK4 4-Gauge Wiring Kit

Get a matching Fosgate wiring kit for your new Fosgate amplifier! Don't forget the RCA's!

Your Price $62.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $23.99

StreetWires ZN9 Series Interconnect Cable

16.4 ft. of 4-Channel RCA Cable with Rhodium-plated contacts and ZeroNoise construction for clear signal transfer!

Your Price $99.95

Kicker 4-Channel RCA Audio Interconnect Cable

4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

Your Price $19.95

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

AutoSound 2000 CD-104

Audiophile reference series test disc for evaluation of all audio components.

Your Price $11.99

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $12.99

Items we think you might want

T600-2 thumbnail

Rockford Fosgate Power T600-2

• 4 ohms: 200 watts x 2
• 2 ohms: 300 watts x 2
• Bridged, 4 ohms: 600 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

Your Price $499.99

T400-2 thumbnail

Rockford Fosgate Power T400-2

• 4 ohms: 120 watts x 2
• 2 ohms: 240 watts x 2
• Bridged, 4 ohms: 400 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

Your Price $399.99

T400-4 thumbnail

Rockford Fosgate Power T400-4

• 60W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 200W x 2 chan. @ 4 ohm
• 400W x 1 chan. Max
• MOSFET Power Supply
• High-pass and low-pass crossover
• Audiophile grade speaker connections

Your Price $399.99

Product Summary

Manufacturer

Model Number

T600-4

UPC

780687324483

Weight

14.00lbs

Internal SKU

t600-4

Internal Product ID

8988

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate Power T600-4