Expert Service 1-661-257-9993 [Hours]

Audiopipe XV-4BXP

3-Way Crossover

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

xv8bxp thumbnail

Audiopipe XV-8BXP

OUR PRICE: $59.97

View item

Item Added to Cart

Audiopipe XV-4BXP

3-Way Crossover

$59.97

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$7.99
Add Warranty
3 years of protection

Get FAST answers from customers ASK a Question See questions answers

Audiopipe Car Audio Store

General Features:

  • 3-way crossover
  • Maximum Output: 8V
  • Input Impedance: 47,000 ohms
  • Signal-to-Noise Ratio: 95dB
  • Distortion: <0.01%
  • Mid-Range/High-Pass Slope: 18dB/0CT
  • Subwoofer Slope: 24dB/0CT
  • Frequency Range:
    • Front and Rear Low-Pass: 50-400 Hz
    • Front and Rear High-Pass: 50-4000Hz
    • Subwoofer: 50-400 Hz
  • Bass Boost: 12dB
  • Dimensions: 8.25"W x 6.75"D x 1.6"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product History:

Audiopipe XV-8BXP thumbnail
(newest, current model)
Audiopipe XV-4BXP thumbnail
(previous model, replaced by Audiopipe XV-8BXP)

Crossover Specifications

Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

500 - 4000 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 400 Hz
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
.01%
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
95 dB
Width
The width of the item from left to right (side-to-side) measured in inches.
8.25"
Height
The height of the item, measured from top to bottom, in inches.
6.75"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
1.6"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.7
Design
4.3
Usability
4.7
[email protected]

montana

Overall
Durability
Value
Features
Design
Usability
Nice unit.

May 22, 2015

Really similar to a memphis crossover I had (exact same dial location, function and size). Works great, smooth dials and hooks up easy.

16 of 18 found this helpful

Was this review helpful to you?

Duncan

Canada

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Good for Active Set-up

November 13, 2016

Bought this for Active set-up, tweet, mid and sub-woofer. This crossover is best suited for 3-way set-up, I did not need it for the sub crossover really (amp could to that) but it was one of the only ones to have a band-pass for the mid, very important detail. The instructions are not very good but I am no idiot.
Unit seams reasonable quality, the turn-knobs are large, easy to adjust but recessed so accidental adjustment should not happen. Like with most, the indicator dials are for reference only, need to use ear for X-point, and volt meter for gains. Wire connections seem secure enough. Most importantly, the unit has not added noise to the system. This is a solid buy unless you want to get into a DSP but at more money.

0 of 0 found this helpful

Was this review helpful to you?

Audiophile in training when budget allows

Inland Empire, CA

Overall
Durability
Value
Features
Design
Usability
Incredible features for this price

April 10, 2016

I am using this for tri-amp front channel control only. I have two 4 ohm 1 inch silk dome tweeters wired for 8 ohm load for left and right high passed at 4000 Hz and higher; then my midranges are two 4 ohm 5.25 coaxials wired to 8 ohms low passed at 4000 and high passed at 300; then I use the sub for my kicker 6x9 for midbass from 400hz down to the variable highpass (off, 50, 60, 80, 100, 120) in headunit...so this in effect combines for two bandpasses and one highpass...independent gain is great as is the 8 volt output to your amps...clean, controlled separation of frequencies for my front stage...I ran alphasonok ex3b three way crossover in the 90s but had no bandpass and only maybe 2 volts output...I wish it were smaller but that is true of everything to hide in a car...

0 of 0 found this helpful

Was this review helpful to you?

Browse 1 question and 2 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
One of the only few EQ's that offer a Band Pass option, not just High Pass used for 3-way set-up (Tweeters, Mid, Sub)
Duncan S on Sep 19, 2016
It is a true 3way crossover not a 2way with front and rear.A 3way is high mid bass not bass front and rear
Brian L on Nov 22, 2014

Product Summary

Manufacturer

Model Number

XV-4BXP

UPC

784644312353

Weight

3.00lbs

Internal SKU

xv4bxp

Internal Product ID

90492

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Audiopipe XV-4BXP