Expert Service 1-877-289-7664 [Hours]

Sonic Closeout Sale

Rockford Fosgate Punch P3D412 (09P3D412)

12" Dual 4 ohm Punch Stage 3 Subwoofer

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

p3d412 thumbnail

Rockford Fosgate P3D4-12 (Newest Model)

OUR PRICE: $139.99

View item

Get FAST answers from customers ASK a Question See questions answers

It's Called PUNCH For A Reason

The coldest blood runs through the veins of this Rockford Fosgate subwoofer. The 12" dual 4 ohms Punch Stage 3 subwoofer gives the cold shoulder to mercy when it comes to window rattling bass and clarity. The 2.5" dual voice coil receives its power from double stacked ferrite magnets throwing around 1,000 watts of peak power in your face. These energy thirsty Punch stage 3 subwoofers have a simple request; to receive lots of power. Their Kevlar fiber semi-pressed paper cones combine light weight with high strength to dramatically improve performance. Compressed sealed high excursion Poly-ether-ester makes up this woofers surround providing a strong yet elastic connection to the cone. To keep this beast cold blooded, Rockford Fosgate uses anodized aluminum voice coil formers to provide excellent heat dissipation. This punch woofer has stitched tinsel leads that withstand extreme duty cycles, fatigue and high current that is critical to its robust design. This 12" dual 4 ohms Punch Stage 3 subwoofer gives no mercy when it comes to performance, power handling, and construction quality. Just listen, and you will understand why its called a Punch!

General Features:
  • 12" Dual 4 Ohm Rockford Fosgate Punch Series Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Impedance: Dual 4 ohm
  • Kevlar Fiber reinforced semi-pressed paper cone
  • High excursion Poly-ether-ester surround
  • ABS/Acrylic dustcap assembly
  • Tear and fatigue resistant poly-cotton dual linear spider
  • Embedded 16AWG tinsel leads
  • Venturi-Effect cooling increases air speed across key thermal components of the speakers motor parts to maximize cooling
  • Reverse mountable subwoofer with reversible diamond cut cast aluminum trim ring
  • Tall profile surround allows maximum linear travel without reducing overall piston size
  • Extended pole piece and bumped backplate
  • 2.5" High temp 4-layer voice coil with spun-laced Nomex® reinforced collar
  • Anodized aluminum voice coil former quickly dissipates thermal build-up on the voice coil
  • 102 oz. double stacked ferrite magnets
  • Protective PVC textured magnet cover
  • Dual 10AWG compression speaker connectors
  • Frequency response: 27-250 Hz
  • Sensitivity: 85 dB
  • CEA-2031 Compliant
  • 1-year Sonic Electronix.com warranty

Product History:

Rockford Fosgate P3D4-12 thumbnail
(newest, current model)
Rockford Fosgate P3D412 thumbnail
(previous model, replaced by Rockford Fosgate P3D4-12 (Newest Model))
Rockford Fosgate P312D4 thumbnail
(previous model, replaced by Rockford Fosgate Punch P3D412 (09P3D412))

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
500 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
27 - 250 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
16-3/16 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar Reinforced Semi-Pressed Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Poly-Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
Optional (Accessory required and sold separately)
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.75 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.79 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.79 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6-3/4"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
11-1/4"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
75%
4 Star
20%
3 Star
5%
2 Star
1%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.8
Features
4.7
Design
4.6
Usability
4.8
Isaac

Mohave Valley, AZ

Overall
Durability
Value
Features
Design
Usability
Very nice sub

July 28, 2010

This thing bumps the hell out of my girlfriends little neon. It even surprised me. If you need good bumps on a budget this is a great sub for the price.

6 of 6 found this helpful

Was this review helpful to you?

CDK

Pittsburgh, Pa

Overall
Durability
Value
Features
Design
Usability
Great Value!

May 12, 2009

i was looking for three subs to replace my jl audio 12 w 6 subs that i had. I took a chance on these fosgates and i was not disappointed. the subs hit extremely hard and very deep. I have three of them in a custom box in my trunk and they absolutely pound! I wouldn't go anywhere else but sonic electronix for any car audio purchase. The price on all their equipment just can't be beat!!

5 of 5 found this helpful

Was this review helpful to you?

Ross

Montgomery, AL

Overall
Durability
Value
Features
Design
Usability
Nice set up

March 20, 2011

I must first say that sonic electronix is the BOMB! Excellent and affordable prices with outstanding customer service & fast shipping! I have a P3D412 being pushed by a T500 in a ported box, MB Quart 6 1/2 midbass drivers and MB Quart 6 1/2 componets being pushed by a T400 & it sounds awesome! All purchasesd from sonic electronix.The amps are not quite turned up half way and it shakes my Escalade like no other! Not to mention its crystal clear clarity! I have always been a RF fan & will always be!

2 of 2 found this helpful

Was this review helpful to you?

Nick

Spanish Fort, Alabama

Overall
Durability
Value
Features
Design
Usability
amazing subs!!

March 1, 2011

At first I just bought one sub. Later I wanted to get more power and these subs really hit hard. The other day I set a car alarm off while driving by!! I have a 1200 Powerbass amp. Haven't heard subs as loud as mine yet and have had them for about a year and still hit just as hard as when I got them!! Best subs you will get for the price without a doubt.

2 of 2 found this helpful

Was this review helpful to you?

doc

BEAUFORT, NC

Overall
Durability
Value
Features
Design
Usability
GREAT PRODUCT

November 5, 2010

I purchased these speakers for my 16 year old grandson. He installed them in a box under the rear seat of a 96 Silverado. This was accomplished in less than an hour using basic hand tools. Every time he drives up in my driveway, my windows vibrate. This is what today's teenagers want. I would recommend this item for any teenager with similar want. You might want to consider ear plugs for yourself.

3 of 5 found this helpful

Was this review helpful to you?

Kel's

San Diego, CA

Overall
Durability
Value
Features
Design
Usability
They're decent..

March 11, 2012

For the price they're okay. Wasn't too impressed by them. Not SPL subs at all and play the low notes decently at best. But again for the price they aren't to bad. The sub looks great. Even if you did a reverse mount they look good. Pretty durable, I had one hooked up to a T-1000 at 2 ohms. Getting about 650 watts and it took it pretty well. I now have two hooked up to a T-1000 getting 500 a peice. Make sure they're in a ported box. Sealed doesn't sound to well.

1 of 2 found this helpful

Was this review helpful to you?

stevan

rustburg, VA

Overall
Durability
Value
Features
Design
Usability
great price

February 27, 2012

The speakers worked great for about six mounths. The p3's hit so hard they blew the box apart, after putting a new box in the speakers blew apart as well. The amp is the t1000 wired to one ohm with the amp turned almost all the way down.

2 of 4 found this helpful

Was this review helpful to you?

David

Fort Walton beach

Overall
Durability
Value
Features
Design
Usability
Great product

June 15, 2011

Excellent product and at a great price as always with Sonic Electronic fast shipping and excellent customer service

1 of 2 found this helpful

Was this review helpful to you?

Fletch

Orange City, FL

Overall
Durability
Value
Features
Design
Usability
1 P3D412 in a 07 Titan

May 31, 2011

This sub has crazy deep bass with only a Rockford Prime 500watt mono hook to it. I would recommend this sub to any one, had 2 P210s and this one sub blows them out the water. I'm running this sub in a 2.2 CF HO vented box and it is shaking my mirrors loose. The only thing I have a complaint about is I cant fit another one in my truck.

1 of 2 found this helpful

Was this review helpful to you?

Muck

Mesa, AZ

Overall
Durability
Value
Features
Design
Usability
BANGS

April 29, 2011

I just got one of these bad boys used....in about a 1.5 cube sealed box. and WOW I have it runnin 300W rms@ 2 ohm on clean Xtant power and it is by far the best sub I've ever owned. I own a Mercury Mountaineer and never had my roof flex....until now!! SLAMS ON LOWS....get this sub if you got the money!!

0 of 0 found this helpful

Was this review helpful to you?

bud

meadville, pa

Overall
Durability
Value
Features
Design
Usability
sweet

April 26, 2011

i got one of these and two p2s in a monte carlo and it pounds so hard great sub ganna buy another one.

0 of 0 found this helpful

Was this review helpful to you?

Brandon

Canada

Overall
Durability
Value
Features
Design
Usability
Sick Subs!

March 27, 2011

I have 2 of these in my car right now, they are hooked up to a Hifonics BRZ1200, they hit so hard! Great product. The only bad thing is they have a plastic cone! So if you live in a cold place, they can crack when they get to cold.

0 of 0 found this helpful

Was this review helpful to you?

Ryan

Rochester Minnesota

Overall
Durability
Value
Features
Design
Usability
Amazing Subs!

January 4, 2011

These sub's are amazing i have 4 of these babies in my trunk with around 1500 watt mono amp and these just pound. im in my car for at least 2 hours a day with commute daily. all ways running these subs as hard as they will push. had these for about a year now and no complaints at all. these subs just wont blow.
if you do not get these subs your crazy these are the loudest subs you can get for cheap. they are no competition subs but i have one of the loudest stereo's in my town with four of these.
BUY THEM!!!!!

0 of 0 found this helpful

Was this review helpful to you?

brett-ster

gallup nm

Overall
Durability
Value
Features
Design
Usability
great value!!!!!!

January 3, 2011

i would tell any one to buy these any day i have 3 p3's in my truck hooked up to a 3200 watt amp and i'v broke all 6 windows in my truck by turning it up great for the price at a store they wanted $430 for one with out the box or anything ... but great value

0 of 0 found this helpful

Was this review helpful to you?

Anthony

Oro Valley, AZ

Overall
Durability
Value
Features
Design
Usability
Great sub!!

December 28, 2010

You can't beat the bang for your buck with this sub!! I've had mine for a few months now and it sounds just as awesome as the first day, if not better! i've had well over triple the " limits" of the sub going to it and it takes it!! Granted @800rms a channel they got a little warm.. but i normally run them at 250rms @2ohm and they sound awsome! hits the lows pretty good and is just a clean hard bass. It does just what it says, it adds that " punch!! " get it!! you wont be disappointed!!

0 of 0 found this helpful

Was this review helpful to you?

Bada** Sub

Dallas,TX

Overall
Durability
Value
Features
Design
Usability
Out of This World

November 20, 2010

I have just one of these in a sedan and holy s*** does this one sub pump out a lot of bass. Very deep rich bass. Excellent buy.

0 of 0 found this helpful

Was this review helpful to you?

Righteous

Tempe, AZ

Overall
Durability
Value
Features
Design
Usability
The Rock!!!

November 14, 2010

A great sub indeed. I have one 12 going to an Orion Amp and it shocked and impressed me dude. Very impressive sub I must say. On the drive home after buying it I was just super happy with it. Do not buy any alpine sub over the P3. Mark my words this sub will make a Type R sound like a piece of junk.

0 of 0 found this helpful

Was this review helpful to you?

Travis M.

Mount Carmel

Overall
Durability
Value
Features
Design
Usability
Great Value, Great SUB

October 3, 2010

I have owned the P3D412 for almost 2 years and have been pushing it w/ a Rockford p325.1 at 2ohms. I just recently have ordered a Rockford T1000.1bd and I will have to add another sub. I have no plans on anything other than a Rockford. They are certainly one of the best on the market, and Sonic Electronix makes them a great deal w/ their pricing. The only thing I would recommend besides this Rockford sub would be a T series Rockford sub for those who are ready to make the step into competitions.

0 of 0 found this helpful

Was this review helpful to you?

james

salyersville, KY

Overall
Durability
Value
Features
Design
Usability
Rockford Fosgate P3D412

August 19, 2010

the Rockford Fosgate P3D412 I ordered from Sonic Electronix was the best deal I found on the internet. after they arrived at my house I was more then ready to hook them up to my Rockford Fosgate t1001bd amp and after it was done WOW what bass sound like a bomb going off in my trunk. these are rock solid subs and I would recommend them to any one that is serious about car auto

0 of 0 found this helpful

Was this review helpful to you?

Raptor660

Eaton Rapids, MI

Overall
Durability
Value
Features
Design
Usability
Great Buy

August 10, 2010

I have two of these and two HX2's in my Bonneville powered by a Alpine 1000w RMS amp. and it is incredible.. Ungodly bass!

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Single 12" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $29.99

Single 12" Ported Enclosure Custom Black Baffle

Gold Binding post terminals and a high quality 5/8" MDF construction.

Your Price $59.99

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $9.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

12" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Rockford Fosgate Punch P3D412 (09P3D412) Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Rockford Fosgate Punch P3D412 (09P3D412) Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 Rockford Fosgate Punch P3D412 (09P3D412) Subwoofers

Mono Amp

4 Channel Amp

4 Rockford Fosgate Punch P3D412 (09P3D412) Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

P3D412

UPC

780687324704

Weight

25.00lbs

Internal SKU

09p3d412

Internal Product ID

9105

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate Punch P3D412 (09P3D412)