Expert Service 1-661-257-9993 [Hours]

Pioneer + Precision Power Combo

Pioneer DEH-80PRS Audiophile Bluetooth Receiver w/ SKAR Audio 10" Sub + Precision Power 6.5" Coaxial & Component Speaker Set + 5 Chan. Amp

We apologize

This item has been discontinued

Item Added to Cart

Pioneer + Precision Power Combo

Pioneer DEH-80PRS Audiophile Bluetooth Receiver w/ SKAR Audio 10" Sub + Precision Power 6.5" Coaxial & Component Speaker Set + 5 Chan. Amp

$989.90

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$106.99
Add Warranty
3 years of protection

NVX XKIT46 4-Gauge 6-Channel Wiring Kit

6-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$129.99

Add
Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

$18.99

Add
XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

$92.52

Add

Don't see the accessory you're looking for?
View all available accessories for the Pioneer + Precision Power Combo.

Get FAST answers from customers ASK a Question See questions answers

Pioneer + Precision Power Total Car Stereo Upgrade Combo!

The Pioneer + Precision Power Total Car Stereo Upgrade Combo offers an all-in-one option to upgrading your truck's sound system. Why order pieces one at a time when you can get them all at once? This total car stereo upgrade combo features the new center of your vehicle's sound system, a Pioneer in-dash audiophile grade Bluetooth receiver with a 28bit DAC and Pandora support. Also included in the package is a total of 4 Precision Power Power Class speakers, 2 6.5" coaxial speakers capable of up to 480 watts of power and a 6.5" component speaker set capable of 400 watts of power. To cover your bass needs, this package includes a 10" 600 watt SKAR Audio VVXv2 series subwoofer. Tying all of your sound together is the Precision Power PPI P900.5, a 900W 5 channel class D amplifier to efficiently power your system.

Here's What You Get:

  1. Pioneer DEH-80PRS In-Dash Audiophile CD/MP3/USB Car Stereo Receiver w/ Bluetooth, 28bit DAC & iPod/Pandora Support
  2. Precision Power PPI P900.5 900W RMS, Phantom Series Class D Full Range 5-Channel Amplifier
  3. Precision Power PPI PC.652 240W 6.5" 2-Way Power Class Coaxial Speakers w/ Silk Tweeters
  4. Precision Power PPI P65c3 6.5" 3-Way Power Class Series Component Car Audio Speaker System
  5. SKAR Audio VVX-10 D2 600W 10" VVXv2 Series Dual 2 Ohm Subwoofer
  6. NVX XAPK4 100% Copper, True Spec 4 Gauge Single Amplifier Wiring Installation Kit w/Speaker Cable (No RCA)

Click Here to Learn More!




Pioneer DEH-80PRS

In-Dash Audiophile CD/MP3/USB Car Stereo Receiver w/ Bluetooth, 28bit DAC & iPod/Pandora Support
Quantity: 1 Receiver

General Features:

  • In-Dash AM/FM, CD, MP3, USB Receiver with Remote
  • Full-DOT three-line LCD text display
  • Bluetooth technology allows hands-free calling and wireless music streaming
  • Pandora Link integrates your car stereo with your iPhone and Pandora Internet Radio
  • App Mode allows you to listen to content from select compatible iPod or iPhone apps
  • 2-way iPod control allows control from the iPod or the stereo
  • iTunes Tagging marks your favorite songs on the radio for later purchasing
  • Voltage display shows an accurate reading of your electrical
  • Separate display and button color illumination lighting with 210,000 options
  • CEA-2006 compliant amplifier
  • Power Output:
    • Peak: 50 watts x 4 channels
    • RMS: 14 watts x 4 channels
  • Theft-deterrent, detachable face plate
  • Anti-dust design with flap face prevents dust from entering the mechanism
  • Wireless remote control included
  • CD text information display
  • MP3 ID3 Tag Display (Title/Artist/Album)
  • 1-year Sonic Electronix Warranty

Playback and Audio Features:

  • Playback of CD, CD-R, CD-RW, MP3, WMA, WMV and AAC
  • Supertuner IIID AM/FM tuner with 18FM/6AM presets
  • Advanced Sound Retriever
  • Electronic Shock Protection (ESP)
  • Dual (L/R) 16-band graphic equalizer with 7 selectable tone curves (5 Preset, 2 User)
  • 28-Bit Binary Floating-Point Digital Signal Processor (DSP) and 3-Way Digital Network
  • 24bit Digital Analog Converter (DAC) to enhance your MP3/WMA playback
  • Three 24bit Digital Analog Converters are used for high, mid, and low frequency reproduction
  • Full high-capacitance power supply capacitor keeps sound clear
  • Auto Time Alignment estimates the delay from each speaker to the driver's seat
  • Auto EQ uses a microphone to tailor specific musical characteristics according to preference
  • SD/SDHC Card reader for audio playback

Expandability Options:

  • 3 Sets of 5V preamp outputs (front, rear and subwoofer)
  • Built-in Bluetooth technology supports hands-free calling with a compatible Bluetooth phone
  • iPod and iPhone Ready: Standard USB-to-iPod Cable compatible, however Pioneer CD-iU51 is recommend and sold separately
  • Front Auxiliary Input: 3.5mm headphone jack allows connection to portable media devices such as MP3 players
  • 2 Rear USB Inputs: USB port allows connection to digital devices such as flash drives, portable media players, etc.
  • Rear RCA Audio Input: Used for connecting accessories such as CD changers, MP3 players, etc.
  • Steering Wheel Control Ready: PAC SWI-PSv1 or the Axxess ASWC required and sold separately

Bluetooth Features:

  • Built-in Bluetooth technology for hands-free talking and audio streaming
  • Bluetooth version 3.0 +EDR certified
  • Bluetooth range up to 32.8 ft.
  • Bluetooth Profiles Supported:
    • HFP: Hands Free Profile allows a hands-free car kit to connect to a compatible mobile phone
    • A2DP: Advanced Audio Distribution Profile allows high quality audio to be streamed from an audio device to the car stereo
    • AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc) via Bluetooth
    • SPP: Serial Port Profile provides a wireless replacement for RS-232 based serial communications
  • Works with most Bluetooth enabled cell phones
  • Includes a wired microphone for clear, distortion-free talking

Precision Power PPI P900.5

900W RMS, Phantom Series Class D Full Range 5-Channel Amplifier
Quantity: 1 Amplifier

Product Features

  • Phantom Series Class D Full Range 5-Channel Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 70 watts x 4 chan. + 270 watts x 1 chan.
    • 2 ohms: 115 watts x 4 chan. + 440 watts x 1 chan.
    • Bridged, 4 ohms: 230 watts x 2 chan. + 440 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • On/Off circuit delay
  • 5/4/3/ channel operation
  • 3-Way System Protection circuitry
  • Tri-mode capable
  • Band-pass crossovers
  • Input source selector
  • SMT Circuitry
  • Composite double sided epoxy PCB
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Dimensions: 11-1/2"L x 6-1/2"W x 2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
  • More Descriptions Coming Soon!!!!

Precision Power PPI PC.652

240W 6.5" 2-Way Power Class Coaxial Speakers w/ Silk Tweeters
Quantity: 1 Pair (2 Speakers)

  • 6-1/2" Power Class 2-way Car Speakers
  • Power Handling:
    • Peak: 480 watts per pair / 240 watts each
    • RMS: 240 watts per pair / 120 watts each
  • Polypropylene injection cone woofer
  • Butyl rubber surround
  • 1" Swivel silk dome tweeter
  • CONEX Spider suspension
  • Rubber magnet cover
  • Bi-ample operation
  • 3 ohms impedance
  • 1" Kapton voice coil former
  • Low resonance composite basket
  • Heavy-duty magnet structure
  • Passive crossover included
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Precision Power PPI P65c3

6.5" 3-Way Power Class Series Component Car Audio Speaker System
Quantity: 1 Set (2 woofers, 2 midwoofers, 2 tweeters and 2 crossover networks)


General Features:

  • 6.5" Power Class 3-Way Component System
  • Power Handling:
    • Peak: 400 watts per set / 200 watts each side
    • RMS: 250 watts per set / 125 watts per side
  • Natural fiber woofer and midwoofer cone
    • Precision computer designed cone
    • Tangenial ribs dampen unwanted cone resonance
    • Provides smooth frequency response for clean sound
  • Natural UV resistant Butyl rubber inverted surround
    • Designed to resist power compression
  • Integrated sealer gasket
  • 3" midwoofer driver
  • 1.75" Advanced Motion pleeted diaphragm tweeter
    • Air motion transformer
    • Wide frequency response
    • Superbed on/off axis response
  • Audiophile grade phase optimized crossover
    • Adjustable tweeter level and mid conture
    • High tollerance PCB components
  • 4 ohms impedance
  • Frequency Response: 20-40,000 Hz
  • Top-mount Depth (woofer): 2.625"
  • Top-mount Depth (midwoofer): 1.625"
  • Top-mount Depth (tweeter): 0.625"
  • Sensitivity: 94dB
  • Cast aluminum frame with nonresonant basket design
  • Integrated Nickle plated terminals
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

SKAR Audio VVX-10 D2

600W 10" VVXv2 Series Dual 2 Ohm Subwoofer
Quantity: 1 Subwoofer

General Features:

  • 10" Dual 2 Ohm VVXv2 Series Subwoofer
  • Power Handling:
    • RMS: 600 watts
  • High quality paper cone
  • Premium grade foam surround
  • Double layer spider
  • Spring loaded push terminals
  • 2-1/2" Voice coil with unique air flow system
  • No vent flaring on the back plate to allow for increased air flow
  • Triple stacked ferrite magnets
  • Resonance Frequency (Fs): 34 Hz
  • Top-mount depth: 6-11/16"
  • Sensitivity: 88dB
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty

NVX XAPK4

100% Copper, True Spec 4 Gauge Single Amplifier Wiring Installation Kit with Speaker Cable (No RCA)
Quantity: 1 Wiring Kit

Amplifier Kit Features:

  • 4 Gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts RMS
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • The solid brass and satin-chromed ANL/Mini-ANL Fuse Holder offers ideal protection for high powered systems
  • Strand Count: 1862
  • BC-5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 4 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Gray 4 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Gray/Blue 16 gauge speaker wire
  5. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
  6. One 1/2" black rubber firewall grommet
  7. Two 4 gauge spade terminals
  8. Two black 16 gauge nickel-plated spade lugs
  9. Three blue 16 gauge nickel-plated spade lugs
  10. One black 18 gauge spade terminal
  11. Two 18 gauge red butt connector
  12. Ten 6" black zip ties
Back to Top

Amplifier Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

70 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

115 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

230 watts x 2 channels

Amplifier Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
270 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
440 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
5
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

900 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
Yes
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6-3/4"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
VVX (SKAR Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2-1/2"
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
26.5 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Triple Stacked
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-5/16"
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6-3/4"
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.75 cubic feet
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.5 cubic feet
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed

Electromechanical Parameters

Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
24.9 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
0.52
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
4.18
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
0.49
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
1.8 ohms
Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
34 Hz

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX XKIT46 4-Gauge 6-Channel Wiring Kit

6-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $129.99

Belva BAK46 6-Channel 4 Gauge Amplifier Installation Kit

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $57.95

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

DEH-80PRS_P900.5_PC.652_P65c3_ VVX-10V2 D2

Weight

61.05lbs

Internal SKU

deh80prs_p9005_pc652_p65c3_vvx10v2d2

Internal Product ID

92700

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pioneer + Precision Power Combo