Expert Service 1-661-257-9993 [Hours]

Orion HCCA122- OPEN BOX INCOMPLETE

2500W 12" HCCA Series Dual 2 ohm Competition Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

Orion HCCA122- OPEN BOX INCOMPLETE

2500W 12" HCCA Series Dual 2 ohm Competition Subwoofer

$309.99

Keep Shopping

NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

$29.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Orion HCCA122- OPEN BOX INCOMPLETE.

Get FAST answers from customers ASK a Question See questions answers

Product Features

  • 12" Dual 2 ohm HCCA Series Competition Subwoofer
  • Product is Open Box Incomplete
    • Missing Owners Manual and Installation Hardware
  • Power Handling:
    • Peak: 4000 watts
    • RMS: 2500 watts
  • Polypropylene cone woofer
  • Rubber tri-radius symmetrical surround
  • Dual flat conex spiders with loop stitched tinsel leads
  • Enhanced voice coil cooling systems
  • High temperature PAARC (Polyester Amide, Amide Resin Coated) Voice coil
  • Dual 2 ohm copper wound voice coil on aluminum former
  • Also found as: HCCA12.2, HCCA-12.2
  • Sensitivity: 84 dB
  • If you blow the subwoofer, there is a replacement cone kit that allows you to easily swap out the blown/burned voice coil and surround with a new one. The replacement kit allows you to keep the magnet and basket, therefore saving money as you do not need to buy a new sub.

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
HCCA (Orion)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
4000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
2500 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84 dB
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
Yes (Accessory available and sold separately)

Recommended Enclosure Specifications

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
10.7"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Warranty and Return Policy

Parts Warranty Duration
Not warranted
Labor Warranty Duration
Not warranted
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

Your Price $29.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $97.99

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $88.86

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $94.95

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $7.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 12" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Universal 12" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Orion HCCA122- OPEN BOX INCOMPLETE Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 Orion HCCA122- OPEN BOX INCOMPLETE Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Orion HCCA122- OPEN BOX INCOMPLETE Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 Orion HCCA122- OPEN BOX INCOMPLETE Subwoofers

2 Channel Amp

4 Channel Amp

Browse 10 questions and 20 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
i have W7 and now have the orian both are great but the orion is better in my opinion it hits tighter
Michael C on Apr 20, 2015
Had a Re xxx before and heard this one was good also so i wanted to give it a shot.
viktor m on Sep 20, 2014
They look great and sound even better. I highly recommend this subwoofer. I also like that you can order a recone kit for the orion hcca subwoofers.
Steven A on Feb 6, 2015
This subwoofer is an amazing product!
Lindsey M on Sep 2, 2014
Can you build a speaker box to specs for two of the 2000 watts Orion 12's? If so, could you please tell me the with and length of this particular box?
Rockett on Nov 2, 2014
Best Answer: Hello Ron,

Unfortunately, no , we do not currently fabricate custom enclosures for specific subwoofers. However, you are able to get the dimensions needed for the subwoofer(s) from the manufacture and/or reference the user manual of the sub(s).

http://www.orioncaraudio.com/attachment.php?id_attachment=101
Reply · Report · Customer SStaff on Nov 2, 2014
· Add Answer · I Have This Question Too (1)
one hcca 122 or 1 12 inch W7?
mayitodmngz m on Nov 28, 2014
Best Answer: That depends on what you are trying to achieve and how much room is inside vehicle space. This sub requires a lot of airspace and doesn't do good in a trunk or hatchback. It also needs a deeper box and special opening cut. I used 4ga wire with a 3400w amp at first and it burned through it in 3 weeks. Make sure you use 0ga wire with this one.
Reply · Report · Christa P on Nov 29, 2014
· Add Answer · I Have This Question Too (0)
hi I was wondering what is the best amp for the hcca 122 or atleast somewhat compatible with it?
A shopper on Sep 1, 2014
Best Answer: Hello,

As you can already see, there are MANY options. You are not going to find a "best amp" . Generally speaking, for the Orion HCCA122 , you seek an amp providing 2000w RMS @ 1ohm. In our own installation department, here are the amps we've used:

SKAR Audio T-2000.1D
http://www.sonicelectronix.com/item_74342_SKAR-Audio-T-2000.1D.html

DC Audio 2.0k
http://www.sonicelectronix.com/item_88190_DC-Audio-2.0k.html

NVX XPLD3K
http://www.sonicelectronix.com/item_78508_NVX-XPLD3K.html
Reply · Report · Customer SStaff on Sep 2, 2014
· Add Answer · I Have This Question Too (0)
could i safely put 2500watts into this sub?
A shopper on Sep 6, 2014
Best Answer: Hello,

Could you? Yes. It depends on the power source, signal, tune, and how responsible the person behind the headunit is.

Obviously we need to be talking about a proper amp, however. It would make no sense to run a supposed 2k from a ~$150-200 amp.
Reply · Report · Customer SStaff on Sep 6, 2014
· Add Answer · I Have This Question Too (0)
do you guys think that a hifonics brx2400.1d amp work good on two of these going at 2 ohms the power for it at rms handling is 1600 watts rms and am wanting to see if it would be a good amp to power these?
A shopper on Jan 7, 2015
Best Answer: Hello,

No. 1600w RMS divided amongst two subs would be 800w RMS , to subwoofers that are asking for ~2500w RMS EACH; That is a dramatic underpower figure. One HCCA122 (wired to 1ohm) on One BRZ2400.1D will be a proper match, but not Two subs, wired to 2ohms.
Reply · Report · Customer SStaff on Jan 7, 2015
· Add Answer · I Have This Question Too (0)
how big is the magnet? im trying to buy a ported box with a 11 inch mounting depth but the Maximum Magnet Diameter 8'' at 11'' depth can any one please help me? thank you.
A shopper on Dec 30, 2014
Best Answer: Hello,

Unfortunately, none of the manufacture's specs tells us the diameter of the magnet. However, being that the Magnet sits JUST within the actual "Cutout Diameter", its safe to assume its JUST within ~11" . Being that this will barely squeak by the specs for your enclosure, we suggest contacting Orion Tech Support, info below.

http://www.orioncaraudio.com/attachment.php?id_attachment=101

Toll Free Number: 1 855 475 6048
Email: [email protected]
Reply · Report · Customer SStaff on Dec 30, 2014
· Add Answer · I Have This Question Too (0)
What amp would you recommend for 2 122's?
A shopper on Dec 3, 2014
Best Answer: Hello,

Being that this setup would require ~4000w RMS @ 2ohms, you aren't going to find very many options. In fact, the DC Audio 7.5k is the best option. (The HCCA124 would have been far more practical.)
DC Audio (Soundlab) 7.5k
DC Audio (Soundlab) 7.5k
Reply · Report · Customer SStaff on Dec 3, 2014
· Add Answer · I Have This Question Too (0)
best amp for this hcca 122 either a soundstream TA1.3000 or a TA1.2000?
mayitodmngz m on Nov 16, 2014
Best Answer: Hello,

We recommend the Soundstream TA1.3000D; This will give you better figures, and raise the ceiling to where the setup may clip.

To be fair, the 'Best amp' would be more along the lines of the DC Audio 2.0k, NVX XPLD3K, and SKAR Audio SK-2500.1D.
Reply (1) · Report · Customer SStaff on Nov 16, 2014
· Add Answer · I Have This Question Too (0)
what is the weight on this sub?
mayitodmngz m on Nov 9, 2014
Orion HCCA122
Orion HCCA122
Orion HCCA154
Orion HCCA154
Best Answer: Hello Mario,

HCCA154
Weight
83.00lbs

HCCA122
Weight
77.00lbs
Reply · Report · Customer SStaff on Nov 10, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

HCCA122

Weight

77.00lbs

Internal SKU

LS-hcca122-OBINC

Internal Product ID

92910

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Orion HCCA122- OPEN BOX INCOMPLETE