Expert Service 1-661-257-9993 [Hours]

Pioneer TS-SW2002D2- OPEN BOX

600W 8" TS Series Shallow Mount Dual 2 ohm Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

Pioneer TS-SW2002D2- OPEN BOX

600W 8" TS Series Shallow Mount Dual 2 ohm Subwoofer

$57.95

Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$94.95

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Pioneer TS-SW2002D2- OPEN BOX .

Get FAST answers from customers ASK a Question See questions answers

Pioneer Audio Store

General Features:

  • 8" Dual 2 ohm TS Series Shallow Mount Subwoofer
  • Power Handling:
    • Peak: 600 watts
    • RMS: 150 watts
  • Mica injected molded polypropylene cone
  • Elastic polymer surround
  • Dual 2 ohm voice coil
  • Top-mount depth: 2-5/8"
  • Frequency Response: 20 - 200Hz
  • Sensitivity: 86dB
  • 1-year Sonic Electronix Warranty

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
8"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 200 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
2.8 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mica Injected Polypropylene (MIPP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Elastic Polymer

Recommended Enclosure Specifications

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-5/8"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
7.05"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
65 Hz
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
3.8 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
.98
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
1.20
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
1.5 ohms
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
5.23

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $94.95

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $7.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Pioneer TS-SW2002D2- OPEN BOX Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 Pioneer TS-SW2002D2- OPEN BOX Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Pioneer TS-SW2002D2- OPEN BOX Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 Pioneer TS-SW2002D2- OPEN BOX Subwoofers

2 Channel Amp

4 Channel Amp

Browse 5 questions and 28 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
I needed a little more bass in my car but didn't want to sacrifice trunk space. With this sub I'll be able to add it under my driver's seat and use the matching Pioneer amp I already have from a previous install.
Joshua T on Jul 10, 2016
THEY FIT THE VEHICHLE
steven m on Oct 12, 2015
shallow enough mount with only 2 ohm impedance
michael d on Oct 22, 2015
Direct replacement for factory sub in 2015 Ram Trucks with way better sound quality.
Chad W on Sep 16, 2015
Can i run use this amp (Lanzar RDA753D) to run two door speakers and one 600W Subwoofer (PIONEER TS-SW2002D2) ?
A shopper on Feb 17, 2015
Pioneer TS-SW2002D2
Pioneer TS-SW2002D2
Lanzar RDA753D
Lanzar RDA753D
Best Answer: You *can*... I don't really think I *would.*

That's not a CEA-2006 certified amp, so I wouldn't consider the wattage to be reliable numbers.

At 750W RMS into 4 ohms, that's a lot of power for that little 8" sub. The sub is rated for 150W RMS and 600W MAX. You'd be feeding about 5X the recommended power into that poor sub. The golden rule is that "gain control is not a volume knob" -- but you would have to back your gain off so as not to overpower the speaker.

I would not pair that sub with that amp.
Reply · Report · Keith R on Feb 17, 2015
· Add Answer · I Have This Question Too (0)
I have a 2007 Toyota Tacoma pickup with the JBL sound package. The original sub-woofer is blown. Would this work with the amplifier that came with the truck?
Tom G on Dec 8, 2015
Best Answer: It should with no issues. I have one installed in a 2014 VW Passat with the Fender package that includes an amp. Hits okay but could use more "umph".
Reply · Report · Rolando M on Dec 9, 2015
· Add Answer · I Have This Question Too (0)
will my stock amp in a 99 Lincoln navigator run this sub?
Mark D on Feb 4, 2015
Best Answer: Hello Mark,

Unfortunately, only Lincoln/Ford will have the specifications for you OEM Amplifier. Because of this, we cannot confirm/deny the compatibility. Please contact your local dealer for the figures you seek. We HIGHLY doubt the OEM amplifier is Stable @1ohm, so you will surely need to wire this subwoofer to 4ohms. With that said, if the OEM Amp provides ~150w RMS (or within ~25w of that, either way) then it will work well.
Reply · Report · Customer SStaff on Feb 7, 2015
· Add Answer · I Have This Question Too (0)
I would like to use 2 pioneer ts-2002d2 subwoofers, what would be a good amp? Pioneer?
A shopper on Apr 2, 2016
Best Answer: Hello,

We recommend the Pioneer GM-A5602.

http://www.sonicelectronix.com/item_74606_Pioneer-GM-A5602.html
Reply · Report · Rick MStaff on Apr 3, 2016
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

TS-SW2002D2

Weight

6.20lbs

Internal SKU

LS-tssw2002d2-OB

Internal Product ID

92913

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pioneer TS-SW2002D2- OPEN BOX