Expert Service 1-877-289-7664 [Hours]


Did you know that we price match?

It is important that you always get the best price. Call us at 1-877-289-7664 for our best price on this item or check out our coupons page for great deals!

Wet Sounds HT-AS10

500W Single 10" Amplified Subwoofer Enclosure (WetSounds)

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

stealthas10 thumbnail

Wet Sounds STEALTH AS-10

OUR PRICE: $599.99

View item

Item Added to Cart

Wet Sounds HT-AS10

500W Single 10" Amplified Subwoofer Enclosure (WetSounds)


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

Get FAST answers from customers ASK a Question See questions answers

Wet Sounds Store

Complete All-In-One Package

The active Powered Subwoofer line brings Wet Sounds™ performance technology to the marine environment, in a complete all-in-one package. This complete solution integrates a fully sealed fiberglass enclosure with a built in High Powered 500 watt Class D amplifier and a Hard hitting 10 inch subwoofer; making it a True all in one plug and play subwoofer system. Adjustable crossover with remote gain adjustment and multiple input options makes for a versatile and important part of you Marine System. The Active 10 will bring the bass thumping power on the boat with minimal current draw to keep the party rocking on the water.

General Features:

  • Single 10" Amplified Subwoofer Enclosure
  • Power Output:
    • 1 - 500 Watts @ 14.4V
  • Stainless Steel hardware
  • Remote Bass Control Included
  • Wet Sounds Direct Amp Technology
  • Powder Coated Aluminum Mesh Grille
  • Thermal, Over voltage and Under voltage Protection built in
  • Higher Power composite cone subwoofer with rubber surround
  • Multiple layer sealed fiberglass enclosure with reinforced mounting feet
  • Adjustable Low Pass crossover with subsonic filter, bass boost and phase adjustment
  • Net Weight: 13.6kg / 30 lbs
  • Dimensions: 14.50"W x 11.50"L x 12.75"H

Amplifier Specifications:

  • Output Power @ 14.4V : 1 - 500 Watts
  • Frequency Response: 20Hz-150Hz
  • S/N Ratio (A-weight): >95dB
  • THD with 22k filter: <0.2%
  • Low Input Level: 100mV-4V
  • Hi Input Level: 8V
  • Battery Voltage Range: 10.5VDC-16VDC
  • Variable Low Pass Range: 35Hz-150Hz
  • Crossover Slope: 12dB/Oct
  • Bass Boost ( 45Hz:) 0-12dB
  • Subsonic Filter: 24dB @ 20Hz
  • Variable Phase: 0 / 180
  • Remote Auto Start
  • Protection Circuit Thermal, Over & Under Voltage
  • Amplifier Fuse & Holder: 1 x 25A
  • 4 gauge power and ground wiring is recommended for installation
    • Contact us for information regarding a discount on select amplifier kits
      from our website when purchased together with this amplifier
Check out the Wet Sounds SW-65i-B Owner's Manual

Product History:

Wet Sounds STEALTH AS-10 thumbnail
(newest, current model)
Wet Sounds HT-AS10 thumbnail
(previous model, replaced by Wet Sounds STEALTH AS-10)

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes - with included adapter
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

35 - 150 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>95 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 1 
Amplified or Non-Amplified
This indicates if the subwoofer comes with an amplifier installed as one unit or Non-amplified which requires an external amp to power the subwoofer

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Carbon Composite
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 150 Hz
Here you will find specific warranty information that this item qualifies for. Below are some of the most popular warranties found on the website: 1-Year Sonic Electronix - The item will be returned back to our company for processing and will either be replaced, repaired or exchanged. 1-Year Manufacturer's - The item will be returned back to the manufacturer and they will process the return and either repair or replace it. 90-Day Repair Only - Within 90 days the item can be sent back to our location for repair. No Warranty - This item does not come with any sort of warranty but one can be purchased separately from our website. If the warranty listed is different than any of the ones listed above, please visit the warranty page for specific details.
1-year Manufacturer's

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
The height of the item, measured from top to bottom, in inches.
The width of the item from left to right (side-to-side) measured in inches.
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
VIP Guarantee

Warranty and Return Policy

Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating

Browse 2 questions and 2 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
To be honest if it is the new model at the cheapest price on the entire internet with free 2day shipping for the best marine self powered subwoofer on the market oh not to mention tax FREE.......!!! AMAZING!!!! I will comment once it arrives this Friday. Can't wait !!!
Janelle g on Sep 22, 2016
Company quality, Watt power rating, ease of installation, ease of speaker to amp compatibility.
Jeff S on Jul 10, 2016
I need to replace the sub in my HT-AS10 and I was wonderingh if i could replace it with the SS-10B?
Gparadis on Oct 22, 2016
· Add Answer · I Have This Question Too (0)

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Wet Sounds HT-AS10