Expert Service 1-661-257-9993 [Hours]

RE Audio XXX6.5C- OPEN BOX

6.5" 2-Way XXX Series Component Car Audio Speaker System

We apologize

This item has been discontinued

Item Added to Cart

RE Audio XXX6.5C- OPEN BOX

6.5" 2-Way XXX Series Component Car Audio Speaker System

$209.99

Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

$18.99

Add
NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

$47.99

Add

Don't see the accessory you're looking for?
View all available accessories for the RE Audio XXX6.5C- OPEN BOX .

Get FAST answers from customers ASK a Question See questions answers

Setting Reference Standards

A high end component speaker system must incorporate value with durability, and most importantly stunning sound quality. RE Audio has manufactured a high end component speaker set that will rival the best components available on the market. The RE Audio XXX6.5C component speaker sets not only provide high amounts of power for your mid and high frequencies, but also provide clear staging with their presentation.

Rated at 150 watts RMS the RE Audio XXX6.5C component speaker systems are made to handle power, and sound great while doing so. The XXX lineup is manufactured with sound quality in mind, but also satisfies any requirements for sheer power. A cleverly incorporated silk dome tweeter allows for less bright, but clearer highs. This helps prevent listening fatigue so you can continue enjoying your music as long as you please!

The speakers are manufactured with a 2 Ohm impedance to allow for more output from your amplifiers to match up with the high power requirements of the RE Audio XXX6.5C component style speakers. A split coil design on the voice coils allow for greater heat dissipation under higher power levels. These component speakers raise the bar for high quality components speakers at a great value price.

Package Includes:
  • Two XXX Series Midwoofers
  • Two XXX Series Tweeters
  • Two XXX Series Crossover Networks
  • Two Midwoofer grilles
  • Two sets of speaker wire (9.5 ft. each)

General Features:

  • 6-1/2" XXX Series 2-Way Car Component System
  • Power Handling:
    • Peak: 600 watts per set / 300 watts each side
    • RMS: 300 watts per set / 150 watts each side
  • Foamed-Core Poly-Aluminum cone material
  • Sanoprene speaker surround
  • 1" Silk dome tweeter
  • FEA optimized motor structure
  • 2" single 4-layer high-temperature voice coils
  • High linearity Nomex spider design
  • Designed for extreme excursion for high bass output
  • Screw set terminals for a solid connection
  • 2 ohms impedance
  • Die-cast Aluminum basket for reduced noise cancellation
  • Powerful Neodymium magnet on both the bass driver and the tweeter
  • Includes twisted pair speaker wire with a thick braided jacket
  • 12 dB/Octave crossover network
  • Tweeter attenuation control
  • External Crossover Adjustments:
    • Tweeter Attenuation: 0, -6, -9 dB
    • Woofer Frequency: 2,800 Hz, 3,200Hz, and 3,600 Hz
  • Top-mount depth: 3-1/4"
  • Woofer mounting diameter: 5-7/8"
  • Tweeter mounting diameter: 2-1/8"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Speaker Specifications

Series
This is the manufacturer product line of speakers.
XXX (RE Audio)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Foamed-Core Poly-Aluminum
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
3-1/4"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
3-1/2"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-7/8" x 5-7/8" 
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $37.85

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

NVX XTGSP2 Tone Generator and Speaker Polarity Tester

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $7.99

Encore Universal Four Door Power Door Lock Kit

Add Power Door Locking and Unlocking while you have the Door Panels removed

Your Price $29.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $47.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $60.97

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $39.95

NVX Sound Dampening Rubber Roller

Install your Sound Dampening with ease using this heavy duty rubber roller!

Your Price $7.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

XTC 6-1/2" Round Large Frame, Shallow Foam Speaker Baffles

Creates a tight seal behind speaker for enhanced audio quality.

Your Price $13.84

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $5.99

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $11.99

Browse 4 questions and 17 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
The reviews says they are good speaker so im trying them
Sadasiven S on Oct 17, 2016
My buddy wanted me to order for him, because they looked like little BEASTS!
Cory C on Feb 10, 2016
RE AUDIO is one of the best manufacturer of Sound quality equipment, and I wanted a component set that goes along with my RE AUDIO XXX15 subwoofer. I found this set and grabbed 'em fast.
Ali A on Feb 20, 2016
I've had one pair in my car for about 9 months plan on adding 2 more over the next month or so really like how they sound
Gary B on Jan 15, 2016
Hy guys what is the recommended crossover point to set up in your amp for this speakers ??
yusme on Oct 22, 2015
Best Answer: I have mine right at about 80 Hz and they do great.
Reply · Report · Ryan S on Oct 22, 2015
· Add Answer · I Have This Question Too (0)
Will the re audio xxx6.5 fit in the rear pannel of the 2005 acura tl?
A shopper on Aug 5, 2014
Best Answer: I believe you'll be ok as far as depth goes, but you will have to buy an adapter that will change the speaker from a 6x9 oval shape to a 6.5" circular shape.
Reply · Report · Emma L on Aug 5, 2014
· Add Answer · I Have This Question Too (0)
RE audio does not submit the frequency response for the tweeters, if you could submit that info, it will be appreciated ?
Titus P on Sep 22, 2016
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

XXX-6.5C

Weight

13.00lbs

Internal SKU

LS-xxx65c-OB

Internal Product ID

93339

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: RE Audio XXX6.5C- OPEN BOX