Expert Service 1-661-257-9993 [Hours]

Clarion XC2410

400W Peak Ultra Compact 4/3/2 Channel XC Series Micro Class D Marine Amplifier

In Stock
|

List price $199.99

You Save: $85.00 (42.50%)

Thanks , You Pay:

$114.99

with warranty

+ FREE Shipping in US 48

Order within 7 hrs 8 mins to ship today

Arrives by Thursday, Dec. 15 to zip 94107

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

Clarion XC2410

400W Peak Ultra Compact 4/3/2 Channel XC Series Micro Class D Marine Amplifier

$114.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$13.99
Add Warranty
3 years of protection

Stinger SK4681

8 Gauge 4000 Series Complete Amplifier Wiring Kit

$39.99

Add
NVX VUBT2

Universal Bluetooth Audio Receiver

$26.99

Add
NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

$11.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Clarion XC2410.

Get FAST answers from customers ASK a Question See questions answers

Bundles with this Product

=

Save 25% on an 8 Gauge Amp Kit with Purchase!

You will need an amp kit to install your amp, and the Belva BAK84 is the perfect kit for this amp. For a limited time, when you click "Add Both to Cart", you'll receive 25% off the amp kit. This offer cannot be combined with any other coupons or offers.

6.25

93367

2357

Clarion XC2410

$114.99

+

25% OFF

Belva BAK84

$24.99

Special Price $18.74 ($24.99 if purchased separately)

Belva BAK84

• Complete 8 Gauge 4-Channel Amplifier Installation Kit
• Designed Specifically For Car Audio Systems Up to 500 Watts RMS
• Premium Power and Ground Wire Provides Optimal Power Transfer
• Mini-ANL Fuse Holder With A 60 Amp Mini-ANL fuse
• 30% Copper CCA Wire

(Offer 1 of 1)

Combined Total Price

$133.73

You Save $6.25

Clarion Audio Store

"Easily exceeds all of its published performance specifications. It exceeds the published power numbers by a considerable amount, while other critical specs like signal-to-noise and frequency response also measure very well." - PASMAG.COM

You can read the full article on the Clarion XC Amplifier Series here


General Features:

  • Clarion XC 2110
  • Class-D FullRange 2-Ohm Stable 4-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 50 watts x 4 chan.
    • 2 ohms: 75 watts x 4 chan
    • Bridged, 4 ohms: 150 watts x 2 chan.
  • Total power output: 400 watts
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • Turn-On/Off Muting Circuitry (Soft Mute)
  • 4/3/2 channel operation
  • Speaker-level (high-level) input
  • RCA inputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Nickel heat-sink for extreme heat dissipation
  • Input sensitivity:
    • Line level: 200mV-8V
    • Speaker level: 600mV-20V
  • Frequency Response: 20 - 30,000Hz
  • Total Harmonic Distortion (THD): ≤1%
  • Signal to Noise Ration: 70dB
  • Variable high-pass filter: 15 - 250Hz, 12dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
  • 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 7.17"W x 3.23"L x 1.54"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the XC2410 Owner's Manual

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

50 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

75 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

150 watts x 2 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

Power Specifications - Subwoofer Channel

Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
XC
Marine Certified
Marine certified means that the unit has been designed and manufactured with a marine use in mind. It will withstand the harsh conditions that come from marine use. Generally, they are treated against UV rays and treated with special protective coatings.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

400 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

300 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
≤ 1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

15 - 250 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
70 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
48 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes
Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0
mark

grapevine, TX

Overall
Durability
Value
Features
Design
Usability
Nice product

July 17, 2016

Great price great product compact easy to install
Great for marine use

0 of 0 found this helpful

Was this review helpful to you?

Bob

AR

Overall
Durability
Value
Features
Design
Usability
Awesome little marine amp

July 6, 2016

My new go to amp for marine and custom side by side tops very easy to hide super clean pushing 2 pair 6.5 and an 8" sub Thnks Soni

0 of 0 found this helpful

Was this review helpful to you?

humberto

Dallas, TX

Overall
Durability
Value
Features
Design
Usability
Excelente

April 17, 2016

Excelente producto, Mucho mejor de lo esperado.... y rapido envío....Muchas gracias Sonic Electronix

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Stinger SK4681

8 Gauge 4000 Series Complete Amplifier Wiring Kit

Your Price $39.99

Belva BAK82

8 Gauge Amplifier Installation Kit with 2-Channel RCA Interconnects

Your Price $19.99

NVX XKIT82

8 Gauge True Spec Amplifier Installation Kit

Your Price $49.99

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $26.99

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $74.99

NVX XUBT4

Universal Bluetooth Audio Receiver

Your Price $74.99

NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

Your Price $11.99

Kicker 4-Channel RCA Audio Interconnect Cable

4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

Your Price $19.99

StreetWires ZN7 RCA Interconnect Cable

16.4 ft. of 4-Channel RCA Cable with hyper twist construction, oxygen free copper, and precision machined tips.

Your Price $59.99

StreetWires FB8

8 Gauge Firewall Bushing

Your Price $6.95

Car/Marine Audio Installation Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Browse 2 questions and 2 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Compact amp for boat console
Ed R on May 3, 2016
When running in 2 channel bridge mode, do you just plug the front channel RCAs or do you still have to plug all 4 channels with adapters/splitters? Doesn't seem to address than in the manual.
A shopper on Mar 18, 2016
Best Answer: All four Channel require a signal.
Reply · Report · Rick MStaff on Mar 18, 2016
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

XC2410

UPC

729218020999

Weight

2.00lbs

Internal SKU

xc2410

Internal Product ID

93367

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Clarion XC2410

  • Clarion XC Series Compact Marine Amplifiers | CES 2016
  • How To Install an Amplifier: Car Amplifier Basics Part 2