Expert Service 1-661-257-9993 [Hours]

JL Audio HX300/1

300W Class D Full-Range Ultra-Compact Monoblock Amplifier for Powersport Vehicles / SSVs / UTVs / Motorcycles / Muscle Cars / HotRods / Cars

In Stock
|


dollar sign

Special Sale Price!
Small Package, Huge Sound, Same JL Audio Quality

List price $249.99

You Save: $80.00 (32.00%)

Thanks , You Pay:

$169.99

with warranty

+ FREE Shipping in US 48

Order within 16 hrs 41 mins to ship 12/9

Arrives by Thursday, Dec. 15 to zip 94107

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Item Added to Cart

JL Audio HX300/1

300W Class D Full-Range Ultra-Compact Monoblock Amplifier for Powersport Vehicles / SSVs / UTVs / Motorcycles / Muscle Cars / HotRods / Cars

$169.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$19.99
Add Warranty
3 years of protection

JL Audio XD-PCS8-1B 8-Gauge Wiring Kit

Get a JL Audio wiring kit to match your new JL amplifier! Don't forget the RCA's!

$74.99

Add
Bass Remote

A bass remote made specifically for the this amplifier.

$44.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$199.99

Add

Don't see the accessory you're looking for?
View all available accessories for the JL Audio HX300/1.

Get FAST answers from customers ASK a Question See questions answers

Bundles with this Product

Get 5% off the JL Audio Marine Bass Knob with Purchase!

For a limited time - while supplies last - get an instant 5% off the JL Audio Marine Remote Knob Control used to adjust the level of your amplifier from the front of the vehicle. This offer cannot be combined with any other offers.

2.25

93401

1895

JL Audio HX300/1

$169.99

+

5% OFF

JL Audio M-RBC-1 Water Resistant Bass Knob

$44.99

Special Price $42.74 ($44.99 if purchased separately)

JL Audio M-RBC-1 Water Resistant Bass Knob

• Water Resistant Remote Bass Control
• Compatible with various select JL Audio amplifiers

Save 25% on a Complete 8 Gauge Amp Kit!

You're going to need an amp kit to connect your system - bundle & save 25% on the NVX XKIT82 amp kit! 100% copper wire, 8 gauge and true to spec!

12.50

93401

505

JL Audio HX300/1

$169.99

+

25% OFF

NVX XKIT82

$49.99

Special Price $37.49 ($49.99 if purchased separately)

NVX XKIT82

• 8 Gauge 2-Channel Complete Amplifier Installation Kit
• For Car Audio Systems Up To 600 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 2-channel RCA Interconnect Cable

(Offer 1 of 2)

Combined Total Price

$212.73

You Save $2.25

JL Audio Store
JL Audio HX300/1

HX300/1 - Monoblock Class D Full Range Amplifier

Engineered specifically for powersports applications, the HX300/1 monoblock amplifier employs JL Audio's high-speed NexD switching design to pack a serious full-range punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV's or other utility vehicles.

With a robust 300W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system or full-range satellites. The HX300/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch. Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver's seat

HX300/1 Side View

Key Features:

Small Footprint, Big Kick

The JL Audio HX300/1 is clearly designed to be as small as possible without sacrificing the quality and performance we all expect from a JL Audio product. At 1.77" x 3.09" x 8.66" the JL Audio HX300/1 is one of the smallest amplifiers on the market. When compared to its small footprint, the engineering is extraordinary considering the amp is equipped with a proper bank of settings - including a 24 dB per octave filter slope - and true full range frequency response (20 Hz - 12,000 Hz) . Putting the 'nerdy' figures aside, and you still have an amplifier that put outs solid modest power for any sized setup - 160 W @ 4Ω , 220 W @ 3Ω , & 300 W @ 2Ω.

NexD Switching Technology

JL Audio have taken the simple fixed PWM approach - found in almost all common amplifiers - and enhanced it with a very high switching frequency: 400 kHz, which is exponentially higher than most Class D Full-range amplifiers. This pushes the amplifier's bandwidth to a much higher frequency than seen before, and still provide minimal distortion and improved efficiency, while keeping typically bulky circuity more compact. Your speakers will reward you with crisp, clear performance. The bottom line is simply great audio: clean, powerful and reliable.




Sonic Electronix Power Certified Amplifier

The JL Audio HX300/1 Monoblock Amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings.
Learn more about this amp's Sonic Electronix Certified Power Here!


Impedance
Claimed Output
Certified Results
Dynamic Results
4 Ω
160W @ 14.40V
158W @ 14.16V
224W @ 14.14V
3 Ω
220W @ 14.40V
271W @ 14.09V
283W @ 14.05V
2 Ω
300W @ 14.40V
354W @ 14.03V
366W @ 14.01V



General Features:

  • Monoblock Class D Full Range Amplifier
  • RMS Power Rating @ 14.4 V:
    • 4 ohms: 160 watts x 1 chan.
    • 3 ohms: 220 watts x 1 chan.
    • 2 ohms: 300 watts x 1 chan.
    • 1 ohms: ----------N/A-----------
  • RMS Power Rating @ 12.5 V:
    • 4 ohms: 160 watts x 1 chan.
    • 3 ohms: 200 watts x 1 chan.
    • 2 ohms: 250 watts x 1 chan.
    • 1 ohms: ----------N/A-----------
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 158 watts x 1 chan.
    • 3 ohms: 271 watts x 1 chan.
    • 2 ohms: 354 watts x 1 chan.
  • NexD ultra-high-speed switching design
  • Black powder-coated finish
  • Gasketed cover for the controls
  • Stainless steel hardware for durability
  • IPX6 water-resistance rating
  • M-RBC-1 remote level control (sold separately)
    Controls bass levels only
  • LED power (green) and protect (red) indicators
  • Accepts RCA (low-level) & Speaker-level (high-level) signal
  • Switchable Input sensitivity: 250 mV-4 V (Low) to 750 mV-15 V (High)
  • Variable Bass Boost: 0 to +12 dB bass boost at 43Hz
  • Variable low-pass filter: 40 - 400 Hz, 24 dB/octave
  • Frequency Response: 20 - 12,000 Hz
  • Total Harmonic Distortion (THD): <1.0%
  • Signal to Noise Ration: 85 dB
  • Subsonic filter: 20 - 40 Hz
  • Selectable phase: 0 / 180°
  • Fuse Rating: 30A x 1
  • Dimensions: 8.66"W x 3.09"D x 1.77"H
  • 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 2 Year Manufacturer's Warranty


Check out the JL Audio HX300/1 Owner's Manual

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

160 watts x 1 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

300 watts x 1 channels
RMS Power @ 1 ohm

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 1 ohm, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not Stable

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
HX (JL Audio)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

600 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

300 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<1.0%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 400 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
20 - 40 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
85 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Optional (Accessory required and sold separately)
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
30A x 1 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
No
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Yes

Warranty and Return Policy

Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
4.5
Usability
4.5
Luke A

Taylor, MI

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Works great

August 28, 2016

This works great for such a small amp. I was able to hide it under a seat and still get the watts I wanted. Wish it was not made in China.

0 of 0 found this helpful

Was this review helpful to you?

Nick A

Eugene, Oregon

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Little Amp, Big Sound

June 30, 2016

I had high expectations when I bought this amp and it did not disappoint. Installed this bad boy into my 2007 Polaris Ranger with a 10" Kicker CVR and it it bumps. I have a 12" Kicker CVR in my car and the 10" paired with the HX300/1 seems to hit harder that the 12". Very pleased with this amplifier.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

JL Audio XD-PCS8-1B 8-Gauge Wiring Kit

Get a JL Audio wiring kit to match your new JL amplifier! Don't forget the RCA's!

Your Price $74.99

JL Audio XD-ACS30 8-Gauge Wiring Kit

Get a JL Audio wiring kit to match your new JL amplifier!

Your Price $59.99

NVX XKIT82 8-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire and this kit has everything you need!

Your Price $49.99

Bass Remote

A bass remote made specifically for the this amplifier.

Your Price $44.99

AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

Your Price $199.99

The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $129.99

AudioControl THE-EPICENTER-WHITE

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $139.99

NVX XBBR

Looking to fine tune the bass in your vehicle? Look no further

Your Price $79.99

Kicker KI24 K-Series RCA Audio Interconnect Cable

4 Meters (13 ft.) 2-Channel K-Series RCA Audio Interconnect Cable

Your Price $15.95

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

4000 Series 2-Channel RCA Cable

17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile

Your Price $16.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

Your Price $72.99

Kinetik HC600-BLU

BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

Your Price $49.99

XS Power D545

12-Volt Deep Cycle AGM Power Cell with 800 Max Amps

Your Price $109.99

Rockford Fosgate RFC1D - Top of the Line 1 Farad

Digital 1.0 Farad Car Audio Capacitor for up to 1000W Max

Your Price $99.99

Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

Your Price $21.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Does the JL HX300/1 come with speaker wire to RCA for high level input?
Steve S on Jun 15, 2016
Best Answer: Hi Steve,

The JL Audio XD-CLRAIC2-SW Speaker Wire to RCA Adaptor is recommended, sold separately.

http://www.sonicelectronix.com/item_45960_JL-Audio-XD-CLRAIC2-SW.html

(To be fair, any such cable will work.)
Reply · Report · Rick MStaff on Jun 15, 2016
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

HX300/1

UPC

699440984003

Weight

5.00lbs

Internal SKU

hx3001

Internal Product ID

93401

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio HX300/1

  • JL Audio HX300/1 Amplifier Dyno Test | SMD D'Amore AD-1
  • JL Audio HX300/1 & MHX300/1 Car and Marine Amplifiers | Product Overview