Expert Service 1-877-289-7664 [Hours]

2 Pack of Kicker CVR122 (07CVR122)

Pair of 12" Dual 2 ohm CompVR Series Car Subwoofers

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

  • Two 12" Dual 2 Ohm CompVR Series Subwoofers
  • Power Handling:
    • Peak: 1600 watts per pair / 800 watts each
    • RMS: 800 watts per pair / 400 watts each
  • Impedance: Dual 2 ohms
  • Inverted Structural Dome Polymineral Injection Molded Cone: Remains rigid, and lowers distortion
  • Rear Cone Brace: Offers unmatched strength and resistance to deformation
  • Ribbed Santoprene Surround for Linear Cone Motion
  • Silver-Coated Stamped Steel Basket
  • Stitched Surround: Ensures the cone and surround won't separate, even under the highest loads
  • High-temp Polyimide Film Voice Coil Former
  • Dual Ultra-Length Voice Coils
  • Perimeter Venting
  • Sleeved High-Power Tinsel Lead Wires
  • Spring Loaded Nickel-Plated Terminals
  • Other search terms: CVR12 2 ohms, CVR122, 07CVR12, 07CVR122, 07CVR 12" 2 ohm, CompVR 12", CVR 12", Comp VR 12"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
2011 Kicker Authorized Online Dealer and eBay Seller Find out more info about the 07CVR122 at our blog!

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Comp-VR / CVR (Kicker)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
25 - 500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86.7 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
12.64 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Silver
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Injection Molded Polypropylene (IMPP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
Optional (Accessory required and sold separately)
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
4.6 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.75 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
2.25 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6-3/16"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
11-1/8"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
79%
4 Star
21%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.9
Value
4.9
Features
4.8
Design
4.6
Usability
5.0

Dustin

Wausau, WI

Overall
Durability
Value
Features
Design
Usability

Buy these!

June 1, 2011

I just received these subwoofers, and have them hooked up to a 1200 Watt Hifonics Brutus amp running at 2 ohms and all I can say is wow!!! I'm putting 450 RMS to each subwoofer with settings about halfway and these babies still are loud and make my car shake!!! I would def recommend these to anybody who wants some good bass!!! And Sonic Electronix will not disappoint you! They ship usually within a day and you'll have your order within days!!!! Pick em up!

2 of 2 found this helpful

Help our customers find the most helpful reviews

Andrew

Middletown, PA

Overall
Durability
Value
Features
Design
Usability

If you wanna be LOUD and LOW get these!!

July 20, 2012

I have two of these in a box made by Dave the Box Guy (If you dont know who he is, look him up. He does awesome work) and they are LOUD!! I am powering them with a Visonik V318XT 800 watt rms amp and they flex my Suv like crazy. I even have windshield flex! When Im parked in front of my house my doorknocker on my front door litterally jumps up and down from the bass! If you power them right and put them in a decent box they will be loud. For how loud they are I would expect them to cost atleast twice as much! If you wanna be heard from blocks away without breaking the bank get these you wont be dissapointed!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Josh

NV

Overall
Durability
Value
Features
Design
Usability

Loud

March 4, 2012

Wow! I have 2 of these in a 5.5 cubic ft box tuned to about 35 hz on a 1500 watt hifonics hfi at 2 ohms so they are getting 500 each and they take it like nothing. My buddies hear me coming way before they see me. Sound great. And for the price it dosnt get any better. Upgrading to a hifonics Brutus 2400 on an Orion hcca 15 this summer!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dana

Eureka, IL

Overall
Durability
Value
Features
Design
Usability

Just what I was looking for!

February 14, 2012

Kicker has always had a great reputation when it comes to car audio equipment, so when I was in the market to buy subwoofers to finish off my sound system, Kicker was one of the handful of brands I considered. I finally chose to purchase the Kicker CVR's over the multitude of other options for their very responsive Ribbed Santoprene Surround and respectable 400 watt RMS power handling characteristics. After installing these subs and powering them with a Hifonics Brutus BRZ1200.1D, the sound that I received from these subs were beyond my expectations. When designing my sound system, I wanted to build it to make MUSIC, not just obnoxious bass. That being said, the Kicker CVR's are more than capable of rattling my car to pieces, but as I said, I prefer a crisp, clean sound that does not get muddy or distorted at very high volume, not a sound that is sheer bass alone. I am happy to say that I have not been disappointed by the performance of these subs, they do exactly what I want them to do. I am very pleased with the CVR's, and would recommend them to any audio enthusiast.

0 of 0 found this helpful

Help our customers find the most helpful reviews

mitchell

wenatchee, WA

Overall
Durability
Value
Features
Design
Usability

kicker subs

August 16, 2011

These subs ROCK!!! I have them hooked up to a rockford r600-5 channel amp and they are absoloutely ridiculous. Buy these! Great price and even better subs.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Anthony

Medford, MN

Overall
Durability
Value
Features
Design
Usability

Holy S***!!!!

April 22, 2011

When I bought these I had first put them in a ported box. Tuned to around 38Hz. They got EXTREMELY loud in that ported box. But they were a little bit muddy and did not get as low as I was looking for. So I bought a big sealed box, (2.24 cu. ft. per sub) and OMG these things get so low. and still get loud. The sound is way cleaner too! I have them hooked up to a 2000 watt amp (1200 RMS, 600 RMS to each) I am so glad I bought these subs. I will not buy another audio brand again. For the price u will turn heads every where. that I can promise u. PS. Make sure u have extra cash to fix things on ur car that these subs will break. haha

0 of 0 found this helpful

Help our customers find the most helpful reviews

rcv

lovington, nm

Overall
Durability
Value
Features
Design
Usability

wow!

April 4, 2011

Man these subs hit hard I love the sound they are phenomenal subs best I've had got the standard shipping and they were on my doorstep 4 days after I ordered I will never buy anywhere else SonicElectronix is the best

0 of 0 found this helpful

Help our customers find the most helpful reviews

Anthony

Owatonna, MN

Overall
Durability
Value
Features
Design
Usability

BBOOOOOOOMMMMM!!!!!!

March 2, 2011

i know this is a long review. but if ur unsure what to get for subs. read this............. 400 RMS each/800 RMS for both.??? Bull! I have both of mine runnin on a 2000 watt amp pushing out 1200 RMS (600 RMS each) and they are running as if im hardly pushing them. They were originally in a ported box and OMG they got loud as hell. but not very clean. so i just bought a sealed box (2.25 cu. ft. each sub) and it shakes my entire car. when the lows hit nothin is safe inside. or out. my windshield wipers bounce up and down along with my trunk lid and doors move in and out. these subs are easily the best subs out there. u have the wired properly and have a large enuff amp and u will be beatin down the block in no time. If u want them to be loud with decent sound quality go ported. If u want them to get low ( and I mean LOW) with dead on accuracy. Then get a sealed box. But a big sealed box. at least 2 cu. ft. per sub. either way. u will be happy. and as always. ONLY get it at SONIC ELECTRONIX!! :)

0 of 0 found this helpful

Help our customers find the most helpful reviews

Connor

Lake placid, FL

Overall
Durability
Value
Features
Design
Usability

HEAR ME COMIN...

February 6, 2011

These subs are phenomenal, I would recommend to everyone. I only had one issue, I got the dual 2 ohm when i needed the 4 ohms because my amp isnt stable at 1 ohm so make sure you check it if u get these ones. Great price as always from SONICELECTRONIX!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Max

SC

Overall
Durability
Value
Features
Design
Usability

Amazing Subs

January 7, 2011

Perfect subs. I love the sound I just installed them and I am speechless. I have been using kenwoods. These subs blew them away. I can't wait to break the Kickers in to hear their full potential. I will be a loyal customer to Kicker from now on. I have two of these hooked up to a 1800 watt amp pushing 380 rms at 2 ohms. And man I don't even have it turned up half way. Can't wait to let these hit. Forget losing your hearing to iPod headphones. This is what will get me. Only thing is personally, I like the color of the downgrade of these Kickers. The all black outlined with yellow looks good to me instead of the silver/red look. But Power > color.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ben

Anaheim, CA

Overall
Durability
Value
Features
Design
Usability

Great subs

March 1, 2010

This subs killed my previous Kenwoods, I have them hooked up to an MTX1000 (1K RMS) amp in a dual single slot ported box, these subs are rated @ 800 RMS a pair not true, these could handle way more. Good smooth also hard ground shaking subs if wired properly like mine. Just buy them can't go wrong w/ price & Service from Sonic's, the #1 Car audio-accessories store around.

0 of 0 found this helpful

Help our customers find the most helpful reviews

james horta

PLYMOUTH, IN

Overall
Durability
Value
Features
Design
Usability

great product good prices and fast shippping!

March 1, 2010

i bought these babies 2 weeks ago from this site and i haven't put them in bc i need to save up for the zx750.1. it was nice to see subs at my doorsteps couple of days from ordering. I also purchased the DS series 6x9s kickers, i am going to purchase the 6 '3/4' 2 way kicker speakers. i got it all in a 2002 neon sxt. Im pretty sure its going to bump hard!!! all pros and no cons. keep it up SE!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Robert

Rosharon, TX

Overall
Durability
Value
Features
Design
Usability

nice sounding subs

July 12, 2007

these subs hit hard for twelves. when purchasing make sure you choose the proper amp cause it takes a beast to make a beast. if you follow that you will have the loudest system around

0 of 0 found this helpful

Help our customers find the most helpful reviews

Michael

Saint Petersburg, FL

Overall
Durability
Value
Features
Design
Usability

Pretty good subs

July 12, 2007

I own two of these in a ported box, with a kendwood 1000watt max amp. the subs are really good. i think they can sound better if i had a better amp or i need a new box, and that is not ported. these are definitly worth buy especially if you are a n00b. lol. (i didnt purchase my subs from this site,but i should have.i could have save $40)

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Single 12" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

Single 12" Ported Enclosure Custom Black Baffle

Gold Binding post terminals and a high quality 5/8" MDF construction.

Your Price $59.99

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

20 oz. Bag of Poly-Fil

Polyester fiber fiberfill adds better bass to your system.

Your Price $5.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

12" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

AutoSound 2000 CD-101

Low frequency test CD

Your Price $11.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 2 Pack of Kicker CVR122 (07CVR122) Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 2 Pack of Kicker CVR122 (07CVR122) Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 2 Pack of Kicker CVR122 (07CVR122) Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 2 Pack of Kicker CVR122 (07CVR122) Subwoofers

2 Channel Amp

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

07CVR122-2-Pack

Weight

28.00lbs

Internal SKU

2subs_07cvr122

Internal Product ID

9348

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 2 Pack of Kicker CVR122 (07CVR122)