Expert Service 1-661-257-9993 [Hours]

800W Wet Sounds + MB Quart Amplified Marine Speaker Combo

800W 8" Revolution Marine Tower Speaker Pair + 400W 2 Channel NA Class D Marine Amplifier

We apologize

This item has been discontinued

Item Added to Cart

800W Wet Sounds + MB Quart Amplified Marine Speaker Combo

800W 8" Revolution Marine Tower Speaker Pair + 400W 2 Channel NA Class D Marine Amplifier

$1,199.98

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$112.99
Add Warranty
3 years of protection

NVX XKIT82 8-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire and this kit has everything you need!

$49.99

Add
Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

$141.83

Add

Don't see the accessory you're looking for?
View all available accessories for the 800W Wet Sounds + MB Quart Amplified Marine Speaker Combo.

Get FAST answers from customers ASK a Question See questions answers

Announce Your Lake Presence with Authority!

Wet Sounds represents the ultimate in high performance marine audio. Their speakers are specifically designed to not only survive, but thrive in the demanding marine environment. State of the art acoustic engineering combine with years of experience have combined to create an unrivaled marine audio experience. The Revolution Series marine speakers are no exception. These tower speakers utilize Wet Sounds' proprietary REV TEC™ technology to provide outstanding volume and mind blowing full range sound quality both on and off axis. These speakers have been extensively tested to provide out-of-this world sound at distances of over 80 feet without taking a hit in quality or performance.

Nylas™ Frame

Marine Quality Construction

The Revolution series speakers utilize advanced materials and design techniques to ensure long lasting life. To create stellar sound performance without sacrificing durability, Wet Sounds developed a special cone made from a blend of Kevlar, epoxy and fiberglass called EFG™. This special cone is immune to intermittent UV and moisture exposure.

Full Passive Crossover

Be Heard Across the Lake

A full passive crossover network allows the Revolution tower speakers to deliver perfectly tuned frequencies to the powerful 8" woofer for full, rich sound. These speakers are capable of tremendous volume and mid bass without the listener fatigue usually associated with higher volumes. You'll be heard from across the water with Revolution tower speakers!

Grill Mounted Tweeter

Pro-Axial™ Driver, Pro Sound

The Revolution speakers feature a titanium horn loaded compression driver (HLCD) designed to produce a wide, horizontal trajectory for sound production in a directed path as well as off axis without sacrificing quality. The HLCD is considered to be an incredibly efficient transducer that provides outstanding output without much power usage.



Wet Sounds Rev 8 B-SC (Black)

400W 8" Revolution Series Marine Tower Speakers w/ Swivel Clamp
Quantity: 1 Pair (2 Speakers)

General Features:

  • 8" Revolution Series Marine Tower Speakers
  • Power Handling:
    • Peak: 800 watts per pair / 400 watts each
    • RMS: 400 watts per pair / 200 watts each
  • Kevlar reinforced EFG™ cone
  • Marine rated polyurethane surround
  • Heavy duty reinforced composite enclosure
  • Proprietary REV TEC™ technology provides outstanding volume and full range sound quality
  • Pro-Axial™ Driver: Coaxially mounted titanium diaphragm high output tweeter
    • Pro-Axial™ design allows the compression sound to travel through the voice coil former and out of the horn flare
    • Ensures phenomenal volume and accurate clarity
  • Full passive crossover network delivers tuned frequencies for rich, smooth sound
  • 4 ohms impedance
  • Frequency Response: 20-20,000 Hz
  • Sensitivity: 92dB
  • Dimensions:
    • Front to Back: 11-1/2"
    • Hang Height: 9-9/16"
    • Width: 8-3/4"
    • Hang Weight: 12.8 lbs
  • Includes swivel clamp mounting system for ultimate mounting flexibility
  • Color: Black
  • Also available in White
  • Protective neoprene storage case available and sold separately
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Are These Speakers Right for You?

Check out the Wet Sounds Rev 8 B-SC Owner's Manual

MB Quart NA1-400.2

400W 2 Channel NA Series Full Range Class D Marine Amplifier
Quantity: 1 Amplifier

General Features:

  • NA Series 2-Channel Class D Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 200 watts x 2 chan.
  • Total power output: 400 watts
  • 2 channel operation
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • Subsonic filter (24 dB at 15 Hz)
  • Frequency Response: 20-20,000 Hz
  • Signal to Noise Ratio: 90dB
  • 8 gauge power and ground wiring is required for installation
    • Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
  • Dimensions: 3.7"W x 5.5"L x 1.7"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Front Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
8"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Horn
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar Fiber
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Polyurethane
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Amplifier Power Specifications

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

200 watts x 2 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

400 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
4 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
90 dB
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 1 

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX XKIT82 8-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire and this kit has everything you need!

Your Price $49.99

Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

Your Price $19.99

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

18 Butt Connectors, 2 Ring Terminals, and Zip Ties

Great for connecting your car stereo wires to the harness

Your Price $4.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

Rev 8 B-SC_NA1-400.2

Weight

12.60lbs

Internal SKU

rev8bsc_na14002

Internal Product ID

95363

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 800W Wet Sounds + MB Quart Amplified Marine Speaker Combo