Expert Service 1-661-257-9993 [Hours]

NVX NSW124V2- OPEN BOX

350W 12" N-Series V2 Dual 4-Ohm Car Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

NVX NSW124V2- OPEN BOX

350W 12" N-Series V2 Dual 4-Ohm Car Subwoofer

$59.99

Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the NVX NSW124V2- OPEN BOX.

Get FAST answers from customers ASK a Question See questions answers

NVX Store

Wallet Friendly N-Series Power

The NVX N-Series subwoofers offer top-notch sound quality at an entry level price. The NSW124V2 is a great multi-purpose sub that has been engineered to meet the highest audio standards. The stiff, ultra light non pressed paper cone allows the N-Series subs to give you accurate and responsive low-end even when you have your system blasting. The custom blended high roll foam surround allows for greatly improved excursion for further improved sound quality. The 2" dual 4-ohm high temperature aluminum voice coil gives you a wide array of Ohm load wiring options for different applications. With an RMS Power Range of 200-350 watts, the NSW124V2 requires less power to operate efficiently without losing bass quality.

Continuing with the excellent engineering is a stamped steel basket that provides exceptional rigidity while minimizing any unwanted distortion. The N-Series subwoofers also include spring-loaded, chrome plated push terminals that provide an easy and secure speaker wire connection. NVX's mission was to create an exceptional subwoofer at an entry-level price without sacrificing the quality and sound that the consumer deserves. They have succeeded!


General Features:

  • 12" Dual 4-Ohm N-Series Subwoofer
  • Product is Open Box
    • Previously Installed
  • Power Handling:
    • RMS: 200-350 watts
  • Ultra-Light Non Pressed Paper Cone ensures accurate, responsive performance even at high volume levels
  • Custom Blended High-Roll Foam Surround for extended excursion
  • Specially designed high excursion strain-relieved tinsel leads
  • 2" High Temperature Aluminum Voice Coil
  • Top-mount depth: 5.01"
  • Frequency Response: 20 - 200Hz
  • Sensitivity: 92 dB
  • High strength steel basket retains exceptional rigidity to minimize distortion
  • Chrome plated, spring loaded push terminals for easy, secure installations
  • High energy ferrite magnet motor structure allows for greater power handling and voice coil control during high excursions
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Enclosure Recommendations:

  • Ported Enclosure:
    • Recommended Volume: 1.75 ft3
    • Tuning Frequency: 36 Hz
    • Ideal Power RMS: 350W
    • F3 (Hz): 41
  • Sealed Enclosure:
    • Recommended Volume: 1.25 ft3
    • Ideal Power RMS: 350W
    • F3 (Hz): 47
    • FC (Hz): 55
    • QTC: 0.941

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
N-Series (NVX)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
200-350 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 200 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
92 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
12 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Non-Pressed Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.75 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.01"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
10.83"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
28 Hz
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
56.29 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
0.734

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.87

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $92.13

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.97

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 12" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

Universal 12" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

12" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $6.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 NVX NSW124V2- OPEN BOX Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 NVX NSW124V2- OPEN BOX Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 NVX NSW124V2- OPEN BOX Subwoofers

Mono Amp

4 Channel Amp

4 NVX NSW124V2- OPEN BOX Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Browse 5 questions and 15 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
making a demo car to start my own business and the staff was quick to answer my question on this model thank you
Bryan Z on Jan 28, 2015
great reviews, nvx sonic electronix recommended brand
JAIME B on Dec 14, 2014
which one of these is better for my boxes i got two boxes already built into my back seat of car and i dont want to redo it they are 1.60 each box ported in center?
Bryan Z on Jan 26, 2015
NVX NSW124V2
NVX NSW124V2
NVX NSW124
NVX NSW124
Best Answer: Hello Bryan,

We recommend the NVX NSW124V2 . Not only is it a superior driver , based off of the success of the V1, but its designed to work in a smaller enclosure than that of its predecessor as well.
Reply · Report · Customer SStaff on Jan 26, 2015
· Add Answer · I Have This Question Too (0)
I have the first version of the NVX nsw124, can I hook up both the v2 and the v1 together?
Nicholas S on May 20, 2015
NVX NSW124V2
NVX NSW124V2
NVX NSW124
NVX NSW124
Best Answer: Ideally any two sub woofers who share the same rms and same impedance can be wired together. They must both also be either single voice coil, or dual voice coil; using one single and one double will not work.

I usually never recommend using two different subs together, mainly because a used sub and a brand new sub sound completely different. But, it WILL woro
Reply · Report · Curtis T on May 20, 2015
· Add Answer · I Have This Question Too (0)
The specs on this sub say 1.25 cu ft sealed box. Sonic Electronix sells a 1.0 or 1.5 cu ft box. Which of the two would be best for this driver? Smaller & tighter or larger with or without poly fill? I'll be running 440 watts into it (@ 2 ohms from the NVX 900.5 amp).
David B on Nov 22, 2015
Best Answer: I would personally go with the 1.0 cu ft box and stuff it with poly fill to make the sub think it's in a larger enclosure.
Reply · Report · Edward L on Nov 22, 2015
· Add Answer · I Have This Question Too (0)
ok now im just wondering is it possible to flip these around in box i got 2 boxes stacked behind front seats was gonna mount bottom ones in and top one out has this been done?
Bryan Z on Jan 28, 2015
Best Answer: Hello Bryan,

What you are describing is called 'Inverted Mount' , and has been done for years --> http://goo.gl/gaA8xo . In regards to these subs, yes they can be, but please do your homework so you set up the drivers properly. Moreover, the sub has a proper gasket on it already, but we suggest making sure to protect the woofer with a custom foam gasket of some kind.
Reply · Report · Customer SStaff on Feb 2, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

NSW124V2

Weight

11.00lbs

Internal SKU

LS-nsw124v2-OB

Internal Product ID

95384

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX NSW124V2- OPEN BOX