Expert Service 1-661-257-9993 [Hours]

Momentum by Cadence CST.1

1" 200W Surface Mount Hybrid Ceramic High Efficiency Dome Tweeters

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Momentum by Cadence CST.1

1" 200W Surface Mount Hybrid Ceramic High Efficiency Dome Tweeters

$7.99

Keep Shopping

NVX XWS1625

25 ft. of True Spec 16 Gauge EnvyFlex Speaker Wire

$15.99

Add
Dynamat Xtreme Wedge Pak

Just enough Dynamat to install around tweeters and speakers.

$24.99

Add
Door Panel & Upholstery Remover Tool

Easily remove your door panels and other panels to make the installation of your new tweeters easy.

$6.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Momentum by Cadence CST.1.

Get FAST answers from customers ASK a Question See questions answers

Cadence Store

General Features:

  • 1" Momentum Series Car Tweeters
  • Power Handling:
    • Peak: 200 watts per pair / 100 watts each
    • RMS: 100 watts per pair / 50 watts each
  • Hybrid Ceramic High Efficiency Dome
  • 4 ohms impedance
  • built in crossover
  • Can be installed in factory locations
  • Includes hardware installation kit
  • Surface Mountable
  • Sensitivity: 93 dB
  • Frequency response: 5,000 - 22,000 Hz
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

Tweeter Specifications

Priced Per
Car Tweeters are typically sold in pairs so you will receive 2 tweeters for each purchase on tweeters marked "Priced Per Pair". If a tweeter is marked "Priced Per Each" then the tweeter is sold individually and each purchase you make will result in 1 tweeter. High-powered tweeters are typically sold per each tweeter.
Pair
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1"
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Ceramic
Flush Mount
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

No
Surface Mount
If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

Yes
Angled Mount
If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

No
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
100 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
50 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
93 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
5,000 - 22,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0
Vintage George

Houston, TX

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
96 Ram 1500 single cab

February 29, 2016

The old Dodge had old and brittle factory tweets up high on the door panels. I was able to fit these into the factory location perfectly with straps. The Cadence tweeters give my truck a nice fill paired with RF 6x9's and JBL 6.5's. hard to believe something so small makes such a BIG improvement ! I don't have an amp at this time, really not needed ! Maybe later. Very pleased with Sonic Electronix in every way, good prices, super fast shippers.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XWS1625

25 ft. of True Spec 16 Gauge EnvyFlex Speaker Wire

Your Price $15.99

Belva BBSW167

16 Gauge 7 Meter (23 Ft) Speaker Wire

Your Price $12.99

Dynamat Xtreme Wedge Pak

Just enough Dynamat to install around tweeters and speakers.

Your Price $24.99

Door Panel & Upholstery Remover Tool

Easily remove your door panels and other panels to make the installation of your new tweeters easy.

Your Price $6.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
they look like they would be good tweeters
austin c on Jul 29, 2015

Product Summary

Manufacturer

Model Number

cst1

UPC

760488895955

Weight

0.50lbs

Internal SKU

cst1

Internal Product ID

95942

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Momentum by Cadence CST.1