Expert Service 1-661-257-9993 [Hours]

Belva BBLE212 OPEN BOX COMPLETE

2 ohm, 1200W Max Dual 12" Loaded Enclosure with 2 Subwoofers

We apologize

This item has been discontinued

Item Added to Cart

Belva BBLE212 OPEN BOX COMPLETE

2 ohm, 1200W Max Dual 12" Loaded Enclosure with 2 Subwoofers

$109.99

Keep Shopping

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$39.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$53.99

Add
Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

$18.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Belva BBLE212 OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

Subwoofer Features:

  • Item Condition: Open Box Complete
    • Item is used
    • Two 12" Belva Subwoofers Included
    • Power Handling:
      • Peak: 1200 watts total (600 watts each)
      • RMS: 600 watts total (300 watts each)
    • Final Impedance: 2 ohm
      • Each subwoofer is 4 ohm and the system is pre-wired down to 2 ohms
    • Polypropylene cone
    • Durable rubber surround
    • 1.5" black aluminium voice coil
    • 37 oz. ferrite magnet motor structure
    • Authorized Internet Dealer
    • 1-year Manufacturer's Warranty

    Enclosure Features:

    • Dual 12" Ported Subwoofer Enclosure
    • Preloaded with Belva Subwoofers
    • Tuned perfectly to get the best bass from the Belva subs
    • Dimensions: 30.43" L x 14.29" H x 11.73" D

    Subwoofer Specifications

    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    12"
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Single
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    2 ohms
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    300 watts
    Total RMS Power Handling
    This is the total RMS power handling of all the subwoofers included in the package or enclosure.

    If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
    600 watts
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    600 watts
    Total Peak Power Handling
    This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

    If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
    1200 watts
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Polypropylene
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Rubber
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle

    Enclosure Specifications

    Box Type
    Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

    Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

    Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

    Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
    Vented / Ported
    Number of Subs/Speakers
    This value represents the number of speakers or subwoofers that the enclosure accommodates.
    2
    Box Style/Shape
    The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
    Hatchback Style, Angled Back
    Height
    The height of the item, measured from top to bottom, in inches.
    14.29"
    Width
    The width of the item from left to right (side-to-side) measured in inches.
    30.43"
    Depth
    The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
    11.73"
    Number of Terminals
    The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
    1
    Box Exterior Color
    The color of the enclosure's exterior/outer finish.
    Black
    Box Finish
    The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
    Carpet

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Sonic Electronix

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX Speaker Wire (XWS1225)

    25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

    Your Price $39.99

    NVX Sound Dampening Trunk Kit (SDTK20)

    20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

    Your Price $53.99

    NVX Sound Dampening Rubber Roller (SDRLR1)

    Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

    Your Price $18.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-BBLE212-OBC

    Weight

    39.00lbs

    Internal SKU

    LS-bble212-OBCra217413

    Internal Product ID

    96033

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Belva BBLE212 OPEN BOX COMPLETE