Expert Service 1-877-289-7664 [Hours]


Did you know that we price match?

It is important that you always get the best price. Call us at 1-877-289-7664 for our best price on this item or check out our coupons page for great deals!


450W 12" SCXv2 Series Dual 4 Ohm Subwoofer

In Stock. Only 1 Left!

List price $374.98

You Save: $266.49 (71.07%)

Thanks , You Pay:


with warranty

+ FREE Shipping in US 48

Order within o hrs 56 mins to ship 10/24

Arrives by Friday, Oct. 28 to zip 94107

Fast, Free Shipping

Within the US 48

Low Price Guarantee

Seen it for less? Click here

Item Added to Cart


450W 12" SCXv2 Series Dual 4 Ohm Subwoofer


Keep Shopping

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!


20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!


2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.



Don't see the accessory you're looking for?
View all available accessories for the RE Audio SCXv2-12d4 OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

RE Audio Store

General Features:

  • Item Condition: Open Box Complete
    • Item has been installed
    • 12" Dual 4 Ohm SCXv2 Series Subwoofer
    • Power Handling:
      • RMS: 450 watts
    • Dual composite 2-piece cone
    • Rubatek foam surround
    • FEA optimized motor structure
    • Cast aluminum basket
    • Tork-Tite terminals
    • 2.5" 4-layer aluminum voice coil
    • Double stacked magnets
    • Top-mount depth: 6.13"
    • One-Way Linear Excursion: 18.6mm
    • Sensitivity: 87.2 dB
    • Authorized Internet Dealer
    • 1-year Manufacturer's Warranty

    Need the Perfect Subwoofer Enclosure?

    Check out the RE Audio SCXv2-12d4 Subwoofer Enclosure Guide

    Subwoofer Specifications

    Subwoofer Series
    Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
    SCXv2 (RE Audio)
    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    450 watts
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Voice Coil Diameter
    Diameter of voice coil, usually measured in inches.
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    87.2 dB
    Xmax (millimeters)
    Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
    18.6 mm
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle
    Main Cone Color
    This is the color of the speaker's or subwoofer's cone.
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Composite Polypropylene Cone (CPPC)
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Magnet Structure
    Defines the overall structure of the subwoofers magnet.
    Double Stacked
    Subwoofer Grille
    Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
    Re-Cone Kit Available
    Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.

    Recommended Enclosure Specifications

    Recommended Enclosure Type
    This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

    Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

    Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

    Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

    Ported / Vented
    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    Electromechanical Parameters

    Electrical Resistance of Voice Coil (Re)
    Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
    4 ohms

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    4 Star
    3 Star
    2 Star
    1 Star

    Average Attribution Rating

    Accessory Tools and Products

    Accessories added

    25 ft. of Streetwires 12 Gauge Speaker Cable

    You'll need speaker wire to hook up that new subwoofer!

    Your Price $49.95

    Belva 23 ft. of 12 Gauge Speaker Wire

    Ultra-flexible PVC blended jacket for easy installation.

    Your Price $14.99

    20 Square Feet of Sound Dampening Material

    NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

    Your Price $53.99

    Stinger Sound Dampening Trunk Kit

    Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

    Your Price $70.97

    Dynamat Sound Dampening Trunk Kit

    Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

    Your Price $97.97

    2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Universal rubber roller to make it easy to install sound dampening.

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    Cordless Multi-Functional Heat Tool Soldering Iron Kit

    Continuous working lock allows you to work without holding down trigger.

    Your Price $64.73

    1mm All Purpose Solder

    Solder is all purpose for use on most projects where solder is needed.

    Your Price $8.99

    12 oz. Can of Adhesive Spray

    Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

    Your Price $8.97

    Spring Post Terminal Cup

    Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

    Your Price $3.99

    Gold Plated Dual Terminal Banana Plug Connector

    Enables an expandable, secure connection accepting up to 8 gauge wire.

    Your Price $1.99

    Universal 12" Subwoofer Grille

    Keep your subwoofer safe from accidental damages with this amazing grill.

    Your Price $19.95

    12" Protective Waffle Subwoofer Grille

    Keep your subwoofer looking amazing while keeping it safe.

    Your Price $6.99

    Scosche SPL Meter

    Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

    Your Price $21.99

    Impedance Meter / Signal Generator

    Easy to locate tuning frequencies of passive radiators and ported enclosures

    Your Price $285.25

    1 RE Audio SCXv2-12d4 OPEN BOX COMPLETE Subwoofer

    Mono Amp

    2 Channel Amp - Bridged

    2 RE Audio SCXv2-12d4 OPEN BOX COMPLETE Subwoofers

    Mono Amp

    Mono Amp - Option 1

    2 Channel Amp

    2 Channel Amp - Bridged

    4 Channel Amp - Bridged

    3 RE Audio SCXv2-12d4 OPEN BOX COMPLETE Subwoofers

    Mono Amp

    4 Channel Amp

    4 RE Audio SCXv2-12d4 OPEN BOX COMPLETE Subwoofers

    Mono Amp

    2 Channel Amp

    2 Channel Amp - Bridged

    4 Channel Amp

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary


    Model Number




    Internal SKU


    Internal Product ID


    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: RE Audio SCXv2-12d4 OPEN BOX COMPLETE

    • RE Audio New Product Line Overview | CES 2015
    • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?