Garage
Shop

West Coast Customs WCC2200.5 by MB Quart

1100W 5 Channel WCC Series Class D Amplifier (Same as MB Quart OA1100.5)

Product videos
highlight-star-icon

• Full-Range RMS: 75W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Subwoofer RMS: 350W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Class D Circuitry
• FLUID-FETS MOSFETS Circuit
• Heavy Duty Black Onyx
• Dimensions: 9-7/16"W x 16"D x 2-1/4"H

Learn more about the wcc22005

We apologize

This item has been discontinued

Product Highlights


• Full-Range RMS: 75W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Subwoofer RMS: 350W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Class D Circuitry
• FLUID-FETS MOSFETS Circuit
• Heavy Duty Black Onyx
• Dimensions: 9-7/16"W x 16"D x 2-1/4"H

Description


West Coast Customs brand icon

Authorized dealer

West Coast Customs WCC2200.5 by MB Quart

West Coast Customs Signature Amplifiers by MB Quart

The West Coast Customs series amplifiers are manufactured using top quality components from Maxxsonics and MB Quart known around the world. This amplifier uses the power plant found in the MB Quart OA1100.5. At 1,100 watts total, its pairs well with most high output aftermarket speakers. The WCC series amps are designed with 3-way protection circuitry (thermal, overload, and speaker-short protection), making it a very reliable and heavy duty amplifier. The built-in Variable Crossovers ensure that you have the ability to set up a proper Full Range system.

West Coast Customs WCC2200.5 by MB Quart

Best Bang for Your Buck!
MB Quart
OA1100.5
West Coast Customs
WCC2200.5
Your Price $169.99 $149.99
RMS Power 1100W 1100W
Built-in Crossover Low-pass (LP), High-pass (HP) Low-pass (LP), High-pass (HP)
Frequency Response 10 - 45,000 Hz
Forced Mass Heat Sink
2ch/4ch/5ch Mode
Amplifier Class SQ



General Features:

  • WCC Series 5-Channel Class D Car Amplifier
  • Uses same build and design of the MB Quart OA1100.5 amplifier
  • Channel 1-4 RMS Power Ratings:
    • 4 ohms: 75 watts x 4 chan.
    • 2 ohms: 150 watts x 4 chan.
    • Bridged 4 ohms: 300 watts x 2 chan.
  • Subwoofer Channel RMS Power Ratings:
    • 4 ohms: 350 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Channel 1-4 Max Power Ratings:
    • 4 ohms: 150 watts x 4 chan.
    • 2 ohms: 300 watts x 4 chan.
    • Bridged 4 ohms: 600 watts x 2 chan.
  • Subwoofer Channel Max Power Ratings::
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 1000 watts x 1 chan.
  • Max power output: 2200 watts total
  • FLUID-FETS MOSFET Circuit maximizing power efficiency while improving sound quality
  • LED power (green) and protect (red) indicators
  • Variable BassEQ Boost 0 to +10dB bass boost
  • Built-in system diagnostics
  • Mono channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty Black Onyx aluminum alloy heat-sink
  • Input sensitivity: Level: 200mV-6V
  • Frequency Response: 10 - 45,000 Hz
  • Damping Factory: >180
  • Signal to Noise Ratio: >92dB
  • Total Harmonic Distortion: 0.05%
  • Channel Separation: >80dB
  • Fuse Rating: 40A x 2
  • Variable high-pass filter:
    • Channel 1-2: 50 - 4000 Hz
    • Channel 3-4: 30 - 150 Hz
    • Channel 5: n/a
  • Variable low-pass filter:
    • Channel 1-2: n/a
    • Channel 3-4: 250 - 4000 Hz
    • Channel 5: 30 - 150 Hz
  • Speaker Terminals: 16 AWG (Ch1-4) & 14 AWG (Ch5)
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 15.98"W x 9.45"D x 2.23"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
75 watts x 4 channel
RMS Power @ 2 ohms
150 watts x 4 channel
Bridged RMS Power
300 watts x 2 channel
Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
350 watts x 1 channel
RMS Power @ 2 ohms
500 watts x 1 channel
Amplifier Specifications
Series
WCC Series
Amplifier Class
D
Number of Channels
5-Channel
Total RMS Power Output
1100 watts
Maximum Input Gauge Size
2 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
<0.5%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
30 - 4,000 Hz
Low-Pass Crossover Frequency
30 - 4,000 Hz
Signal-to-Noise Ratio
>92 dB
Channel Separation
>80 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Fuse Rating
40A x 2 
Strappable
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

WCC2200.5

Weight:

11.00lbs

Internal SKU:

wcc22005

Internal Product ID:

96295

Product and How-to Videos


  • West Coat Customs WCC2200.5 Car Amplifier
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
25%
4 star
50%
3 star
25%
2 star
0%
1 star
0%



Durability
4.3
Value
4.8
Features
4.8
Design
4
Usability
4.3

Customer Reviews

Sort by:

Loading...

Powerhouse Amp if you're ballin on a budget

I was skeptical about this amp at first being that I've never heard of the brand other than the old TV show. After consulting with one of the experts at the Sonic elect call center who assured me it was indeed a quality product despite the name and price, I bit the bullet and gave it a try. Now keep in mind , I.m coming from more expensive name brand amps like kenwood excellon and fosgate punch. In fact the speakers I hooked to the amp are 2 punch 6.5, 2 punch 6x9, and 2 punch 12s. I honestly wasn't expecting to get comparable sound quality from my setup with this amp as the likes of those. Boy was I pleasantly surprised. First of the installation was the same as any amp, so no issues or surprises there, and I also love that as with most decent amps these days it came with everything needed for both installation and tuning the amp short of the amp install kit with the appropriate cables. The spare fuse is also a plus because... you know... things happen. But having the Allen wrenches in the box is never a negative. It also comes with the base control dial that usually may or may not be included with higher end models. So all in all please with what comes in box. After I got it installed and began my testing and measuring, thats when I realized I got a bargain. I will not say It sounds better than the other fore mentioned amps but it isn't far from being on par with them at all. It managed to push both fosgate subs with the 4 ohm load to thunderous proportions. I mean granted they are solid subs to begin with but this amp really pushes those bad boys while at the same time managing to get great sound from the 4 inside speakers. Everything sounds crisp and clean even at higher volumes. Once I finished tweaking the amp settings along with the decks I realized. this is actually a great amp, not just for the price but a great amp in its own right. So far I really don't have any negatives to report besides maybe the way the dials are labeled but not really. Solid amp, affordable price, typically easy install and tuning. Is it competition grade? I would be hard pressed to say. But It definitely gets the job done if your goal is to have a good to great sounding system for personal use. If you are thinking about pulling the trigger on this amp you should hurry before word gets out and the price either goes up or its always back ordered or sold out. Professional Installation Recommended.

By Dennard on April 10, 2015

25

found this helpful.

Great product

I have 2 kicker 12 comps and they hit very hard with this amp.

By Colby on July 26, 2015

2

found this helpful.

Good value

Running complete system, 4 Polk DB 6 1/2 plus single 10 at 2 ohms in sealed box. Drives it all with ease, good volume and sound quality. You can buy better but it will cost a lot more. Does job well.

By Bob on June 14, 2015

3

found this helpful.

Above average product

I was looking for something cheap to power my whole system, and this does the job well. Powering focal components and focal coaxials plus a kenwood ported subwoofer.
Crossovers and gains are confusing as there are no markings on the knob and on the rca plugs as well, sound quality is above average and the build quality is good. Amp gets hot quickly but did not go to protect mode yet even after pushing for longer period. Good for the price.

By Afnan on June 30, 2015

2

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio XD700/5v2

• 75 watts x 4 channel + 180 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 300 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 300 watts x 1 channel @ 2 ohms
• Total RMS Power: 700 watts
• Class D 2 ohms Stable 5-Channel Amplifier

(8)

$429.99

Memphis VIV750.6V2

• 70 watts x 6 channel @ 4 ohms
• 125 watts x 6 channel @ 2 ohms
• Bridged: 250 watts x 3 channel @ 4 ohms
• Total RMS Power: 750 watts
• Class D 2 ohms Stable 6-Channel Amplifier

$399.95

Power Acoustik RZ5-2500D

• Full-Range RMS: 100W x 4 @ 4 ohms, 150W x 4 @ 2 ohms
• Subwoofer RMS: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Wired Bass Remote Included
• Class D Circuitry
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 4-3/4"W x 12-1/2"L x 1-1/2"H

(29)

$163.99

Infinity Kappa Five

• 75 watts x 4 channel + 200 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 350 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 350 watts x 1 channel @ 2 ohms
• Total RMS Power: 750 watts
• Class D 2 ohms Stable 5-Channel Amplifier

(12)

$289.95

JL Audio RD900/5

• 70 watts x 4 channel + 225 watts x 1 channel @ 4 ohms
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohms
• Bridged: 200 watts x 2 channel @ 4 ohms + 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 900 watts
• Class D 2 ohms Stable 5-Channel-Channel Amplifier

(3)

$659.99

Related Searches


WCC2200.5 small

Item added to your cart.

Price: $149.99

Essential add-ons
Belva BAK06

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 6-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - RED

$94.98

$53.98

Add to cart
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC66X helps you easily integrate with your factory or aftermarket system

$199.99

$79.99

Add to cart
8 inputs / 8 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control

The XLOC88X helps you easily integrate with your factory or aftermarket system

$119.99

$89.99

Add to cart
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$49.99

$29.99

Add to cart
Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

$29.99

$9.99

Add to cart
NVX XWS1275 Speaker Wire

75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$124.99

$59.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

$349.99

$329.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva BB2D

2.0 Farad Capacitor with Digital Red Display

$89.99

$39.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
NVX VUBT2

Universal Bluetooth Audio Receiver

$49.99

$39.99

Add to cart
Marine Grade Bluetooth Audio Controller/Receiver

Marine Grade Bluetooth Audio Controller/Receiver

$62.49

$48.99

Add to cart
NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

$99.99

$59.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon