Expert Service 1-661-257-9993 [Hours]

West Coast Customs WCC2200.5 by MB Quart

1100W 5 Channel WCC Series Class D Amplifier (Same as MB Quart OA1100.5)

Discontinued
|
dollar sign

Claim to Fame: Featured on hit MTV show!

We apologize

This item has been discontinued

Item Added to Cart

West Coast Customs WCC2200.5 by MB Quart

1100W 5 Channel WCC Series Class D Amplifier (Same as MB Quart OA1100.5)

$149.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$16.99
Add Warranty
3 years of protection

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

$149.99

Add
AudioControl LC6i (Black)

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

$109.99

Add
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$39.99

Add

Don't see the accessory you're looking for?
View all available accessories for the West Coast Customs WCC2200.5 by MB Quart.

Get FAST answers from customers ASK a Question See questions answers

West Coast Customs WCC2200.5 by MB Quart

West Coast Customs Signature Amplifiers by MB Quart

The West Coast Customs series amplifiers are manufactured using top quality components from Maxxsonics and MB Quart known around the world. This amplifier uses the power plant found in the MB Quart OA1100.5. At 1,100 watts total, its pairs well with most high output aftermarket speakers. The WCC series amps are designed with 3-way protection circuitry (thermal, overload, and speaker-short protection), making it a very reliable and heavy duty amplifier. The built-in Variable Crossovers ensure that you have the ability to set up a proper Full Range system.

West Coast Customs WCC2200.5 by MB Quart

Best Bang for Your Buck!
MB Quart
OA1100.5
West Coast Customs
WCC2200.5
Your Price $169.99 $149.99
RMS Power 1100W 1100W
Built-in Crossover Low-pass (LP), High-pass (HP) Low-pass (LP), High-pass (HP)
Frequency Response 10 - 45,000 Hz
Forced Mass Heat Sink
2ch/4ch/5ch Mode
Amplifier Class SQ



General Features:

  • WCC Series 5-Channel Class D Car Amplifier
  • Uses same build and design of the MB Quart OA1100.5 amplifier
  • Channel 1-4 RMS Power Ratings:
    • 4 ohms: 75 watts x 4 chan.
    • 2 ohms: 150 watts x 4 chan.
    • Bridged 4 ohms: 300 watts x 2 chan.
  • Subwoofer Channel RMS Power Ratings:
    • 4 ohms: 350 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Channel 1-4 Max Power Ratings:
    • 4 ohms: 150 watts x 4 chan.
    • 2 ohms: 300 watts x 4 chan.
    • Bridged 4 ohms: 600 watts x 2 chan.
  • Subwoofer Channel Max Power Ratings::
    • 4 ohms: 500 watts x 1 chan.
    • 2 ohms: 1000 watts x 1 chan.
  • Max power output: 2200 watts total
  • FLUID-FETS MOSFET Circuit maximizing power efficiency while improving sound quality
  • LED power (green) and protect (red) indicators
  • Variable BassEQ Boost 0 to +10dB bass boost
  • Built-in system diagnostics
  • Mono channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty Black Onyx aluminum alloy heat-sink
  • Input sensitivity: Level: 200mV-6V
  • Frequency Response: 10 - 45,000 Hz
  • Damping Factory: >180
  • Signal to Noise Ratio: >92dB
  • Total Harmonic Distortion: 0.05%
  • Channel Separation: >80dB
  • Fuse Rating: 40A x 2
  • Variable high-pass filter:
    • Channel 1-2: 50 - 4000 Hz
    • Channel 3-4: 30 - 150 Hz
    • Channel 5: n/a
  • Variable low-pass filter:
    • Channel 1-2: n/a
    • Channel 3-4: 250 - 4000 Hz
    • Channel 5: 30 - 150 Hz
  • Speaker Terminals: 16 AWG (Ch1-4) & 14 AWG (Ch5)
  • 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 15.98"W x 9.45"D x 2.23"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

75 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

150 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

300 watts x 2 channels

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
350 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
500 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
WCC (West Coast Customs)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
5
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1100 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
2 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.5%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 4,000 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 4,000 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>92 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
>80 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 10 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 2 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
25%
4 Star
50%
3 Star
25%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.3
Value
4.8
Features
4.8
Design
4.0
Usability
4.3
Dennard

Jackson, MS

Overall
Durability
Value
Features
Design
Usability
Powerhouse Amp if you're ballin on a budget

April 10, 2015

I was skeptical about this amp at first being that I've never heard of the brand other than the old TV show. After consulting with one of the experts at the Sonic elect call center who assured me it was indeed a quality product despite the name and price, I bit the bullet and gave it a try. Now keep in mind , I.m coming from more expensive name brand amps like kenwood excellon and fosgate punch. In fact the speakers I hooked to the amp are 2 punch 6.5, 2 punch 6x9, and 2 punch 12s. I honestly wasn't expecting to get comparable sound quality from my setup with this amp as the likes of those. Boy was I pleasantly surprised. First of the installation was the same as any amp, so no issues or surprises there, and I also love that as with most decent amps these days it came with everything needed for both installation and tuning the amp short of the amp install kit with the appropriate cables. The spare fuse is also a plus because... you know... things happen. But having the Allen wrenches in the box is never a negative. It also comes with the base control dial that usually may or may not be included with higher end models. So all in all please with what comes in box. After I got it installed and began my testing and measuring, thats when I realized I got a bargain. I will not say It sounds better than the other fore mentioned amps but it isn't far from being on par with them at all. It managed to push both fosgate subs with the 4 ohm load to thunderous proportions. I mean granted they are solid subs to begin with but this amp really pushes those bad boys while at the same time managing to get great sound from the 4 inside speakers. Everything sounds crisp and clean even at higher volumes. Once I finished tweaking the amp settings along with the decks I realized. this is actually a great amp, not just for the price but a great amp in its own right. So far I really don't have any negatives to report besides maybe the way the dials are labeled but not really. Solid amp, affordable price, typically easy install and tuning. Is it competition grade? I would be hard pressed to say. But It definitely gets the job done if your goal is to have a good to great sounding system for personal use. If you are thinking about pulling the trigger on this amp you should hurry before word gets out and the price either goes up or its always back ordered or sold out. Professional Installation Recommended.

24 of 28 found this helpful

Was this review helpful to you?

Bob

York PA

Overall
Durability
Value
Features
Design
Usability
Good value

June 14, 2015

Running complete system, 4 Polk DB 6 1/2 plus single 10 at 2 ohms in sealed box. Drives it all with ease, good volume and sound quality. You can buy better but it will cost a lot more. Does job well.

3 of 4 found this helpful

Was this review helpful to you?

Colby

Lawrenceburg, TN

Overall
Durability
Value
Features
Design
Usability
Great product

July 26, 2015

I have 2 kicker 12 comps and they hit very hard with this amp.

1 of 1 found this helpful

Was this review helpful to you?

Afnan

United Arab Emirates

Overall
Durability
Value
Features
Design
Usability
Above average product

June 30, 2015

I was looking for something cheap to power my whole system, and this does the job well. Powering focal components and focal coaxials plus a kenwood ported subwoofer.
Crossovers and gains are confusing as there are no markings on the knob and on the rca plugs as well, sound quality is above average and the build quality is good. Amp gets hot quickly but did not go to protect mode yet even after pushing for longer period. Good for the price.

2 of 3 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

Your Price $149.99

Stinger SK6201 0-Gauge Wiring Kit

You only get great sound when you use great wire. This Stinger kit will do the trick! Don't forget the RCA's!

Your Price $119.99

Belva BPK0D Dual Amp 0/4-Gauge Wiring Kit

Enough wire for 2 amps! Don't forget the RCA's!

Your Price $39.99

AudioControl LC6i (Black)

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

Your Price $109.99

NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

Your Price $39.99

Belva BBIC65 Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

Your Price $19.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1250 Speaker Wire

50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $29.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power D925

12-Volt Deep Cycle AGM Power Cell with 2000 Max Amps

Your Price $169.99

SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

Your Price $208.00

Rockford Fosgate RFC2D

Hybrid 2.0 Farad Digital Stiffening Capacitor

Your Price $129.99

Planet Audio PCBLK2.0

2.0 Farad Digital Capacitor with LED Display

Your Price $34.99

Belva BB2D

2.0 Farad Capacitor with Digital Red Display

Your Price $34.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $26.99

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $74.99

Browse 3 questions and 6 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Price / power output / on sale
tony b on Apr 26, 2015
I have always been a fan of MB Quart and this looks like it will fit my needs
Doug N on Apr 7, 2015
Roccomended By Luke at REVlimited forum
melvin c on Apr 19, 2015
Does setting the gain increase or decrease the wattage output ?
freddy krueger on Apr 20, 2015
Best Answer: Hello Mike,

Technically, both. However, that isn't the intended use/function of the Gain so I will not elaborate. I will, however, say that the Gain (aka "Sensitivity") is intended to match the Level/Sensitivity of the source, in order to obtain a clean signal.
Reply · Report · Rick MStaff on Apr 21, 2015
· Add Answer · I Have This Question Too (1)
I have a 2012 Volkswagen cc and it has a stock radio/navigation. I would like to know if this amp work's with my factory radio? its the amplifier full digital?!
A shopper on Jun 6, 2015
Best Answer: as long as you have the rca jacks on the deck i don't see why it wouldn't..have it installed in a vette.but so far it works great using just a 1.5 cap hasn't gone into safety yet.but I'm using it as a 5chan for whole car
Reply · Report · William M on Jun 7, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

WCC2200.5

UPC

806576221456

Weight

11.00lbs

Internal SKU

wcc22005

Internal Product ID

96295

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: West Coast Customs WCC2200.5 by MB Quart

  • West Coat Customs WCC2200.5 Car Amplifier
  • How To Install an Amplifier: Car Amplifier Basics Part 2