Expert Service 1-661-257-9993 [Hours]

Crunch CS46CX OPEN BOX COMPLETE

250W 4x6" 2-Way CS Series Coaxial Car Speakers

We apologize

This item has been discontinued

Item Added to Cart

Crunch CS46CX OPEN BOX COMPLETE

250W 4x6" 2-Way CS Series Coaxial Car Speakers

$16.99

Keep Shopping

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

$37.85

Add
Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

$18.99

Add
NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

$12.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Crunch CS46CX OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • Item Condition: OPEN BOX COMPLETE
    • Original packaging damaged
    • 4" x 6" CS Series 2 Way Car Speakers
    • Power Handling:
      • Peak: 250 watts
      • RMS: 125 watts
    • Silver alpha cellulose cones
    • Moisture resistant rubber surround
    • Neo mylar soft dome tweeter
    • 4 ohms impedance
    • Sensitivity: 88dB
    • Spade speaker terminals for easy installations
    • Anti-resonant stamped steel basket for improved performance
    • Authorized Internet Dealer
    • 1-year Manufacturer's Warranty

    Priced Per Pair

    Speaker Specifications

    Priced Per
    Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
    Pair
    Speaker Size
    Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
    4" x 6"
    Design
    The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
    2-way
    Tweeter Design
    Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
    Dome
    Tweeter Composition
    Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

    PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

    Mylar
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Cellulose
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Rubber
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    250 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    125 watts
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    88 dB
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

    You need speaker wire to connect your speakers!

    Your Price $37.85

    Belva 23 ft. of True Spec 12 Gauge Speaker Wire

    100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

    Your Price $14.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    NVX XTGSP2 Tone Generator and Speaker Polarity Tester

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Universal Wire Puller & Grabber

    Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

    Your Price $7.99

    Encore Universal Four Door Power Door Lock Kit

    Add Power Door Locking and Unlocking while you have the Door Panels removed

    Your Price $29.99

    NVX SDSK2 Speaker Kit

    Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

    Your Price $12.99

    NVX Sound Dampening Rubber Roller

    Install your Sound Dampening with ease using this heavy duty rubber roller!

    Your Price $7.99

    XTC 4" x 6" Foam Speaker Baffles

    Compresses and forms to the shape of most installations.

    Your Price $12.99

    12-10 AWG Butt Connectors

    These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

    Your Price $5.99

    12-10 AWG Quick Disconnect Connectors

    These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

    Your Price $11.99

    Browse 1 question
    Hide answersShow all answers | Sort by
    Are these speakers shallow mount?
    Andre L on May 11, 2015
    · Add Answer · I Have This Question Too (0)

    Product Summary

    Manufacturer

    Model Number

    LS-CS46CX-OBC

    Weight

    2.20lbs

    Internal SKU

    LS-cs46cx-OBCra219368

    Internal Product ID

    96423

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Crunch CS46CX OPEN BOX COMPLETE