Expert Service 1-661-257-9993 [Hours]

Audiopipe APCL-1504 OPEN BOX COMPLETE

1500W Consumer Line Series 4-Channel Class AB Car Amplifier

We apologize

This item has been discontinued

Item Added to Cart

Audiopipe APCL-1504 OPEN BOX COMPLETE

1500W Consumer Line Series 4-Channel Class AB Car Amplifier

$119.99

Keep Shopping

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$29.99

Add
Kicker 4-Channel RCA Audio Interconnect Cable

4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

$19.99

Add
NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$39.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Audiopipe APCL-1504 OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

Audiopipe Car Audio Store

Quality without the Cost

The Audiopipe Consumer Line series amplifiers were reengineered from the ground up in 2012 to provide plenty of high quality power for even the highest end sound system while keeping their footprint as compact as possible. Audiopipe didn’t skimp on the internals of these amps, the Consumer Line features the finest in electronic protection circuitry to protect against harmful short circuits, thermal overloads and overheating. These premium choice amplifiers are sure to impress.

Oversized Toroids for Better Sound

Oversized Toroids for Oversized Sound

The Consumer Line amplifiers are built with performance in mind, and a quick look under the hood of these amplifiers reveal oversized toroids. These toroids (basically just wire coils) help to regulate the voltage in the amplifier. By overbuilding them, Audiopipe ensures that every CL series amp puts out even, consistent power for the best possible sound, and the longest life from your components.

Outstanding Heat Dissipation

The Finest in Heat Dissipation

When redesigning the Consumer Line series, Audiopipe took great care in designing an amplifier that would not overheat. These amps feature a high quality aluminum heat sink with cooling fins running along each side and grills embedded in the top plate to ensure outstanding heat dissipation and prevent any unwanted heat related shutdowns.

Speaker Level Inputs

High Level Convenience

Audiopipe’s multi-channel Consumer Line amplifiers feature high level inputs (or speaker level inputs) to allow much simpler installations. High level inputs eliminate the need for RCA cables and line output converters by picking up the audio signal directly from the speakers in your car. They are ideal for use with factory radios that do not have RCA outputs to run amplifiers.




General Features:

  • Item Condition: Open Box Complete
    • Item has been installed and used
    • Consumer Line Series 4-Channel Class AB Car Amplifier
    • RMS Power Rating:
      • 4 ohms: 75 watts x 4 chan.
      • 2 ohms: 125 watts x 4 chan.
      • Bridged, 4 ohms: 225 watts x 2 chan.
    • Max power output: 1500 watts
    • Wired remote bass level control included
    • Variable Bass Boost (0 to +15 dB bass boost at 45 Hz)
    • 4,2 or Mono channel operation
    • Input sensitivity:
      • Low level: 200mV-6V
    • Input sensitivity speaker level:
      • Low level: 500mV-12V
    • Speaker-level (high-level) inputs
    • Variable high-pass filter (55-5,500 Hz, 12 dB/octave)
    • Variable low-pass filter (55-5,500 Hz, 12 dB/octave)
    • Low profile construction with aluminum heat sink
    • Overload, short circuit, thermal and low voltage protection
    • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
    • 4 gauge power and ground wiring is required for installation
      • Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
    • Dimensions: 7"W x 15"L x 2.2"H
    • Authorized Internet Dealer
    • 1-year Manufacturer's Warranty

    Power Specifications - Full Range Channels

    RMS Power @ 4 ohms

    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

    If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

    75 watts x 4 channels
    RMS Power @ 2 ohms

    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

    If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

    125 watts x 4 channels
    Bridged RMS Power

    Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

    Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

    225 watts x 2 channels

    Amplifier Specifications

    Amplifier Series
    This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
    Consumer Line (Audiopipe)
    Amplifier Class

    An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

    Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

    Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

    Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

    AB
    Number of Channels
    Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
    4
    Total Peak Power Output
    The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

    It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

    The RMS power rating is more accurate, and we recommend using it for product comparison.

    1500 watts
    Total RMS Power Output
    Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

    RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

    The RMS output figure is much more accurate than the peak rating when comparing products.

    450 watts
    Maximum Input Gauge Size
    This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
    4 AWG
    Minimum Impedance Unbridged
    The lowest impedance the amplifier will handle when it is not bridged.
    2 ohms
    Minimum Impedance Bridged
    The lowest impedance the amplifier will handle when it is bridged.
    4 ohms
    THD at Rated RMS Power
    The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
    .05%
    Speaker Level Inputs
    Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
    Yes
    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    Low-Pass (LP)
    High-Pass (HP)
    Signal-to-Noise Ratio
    This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
    95 dB
    Bass Boost
    The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
    0 - 15 dB
    Bass/Gain Remote
    If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
    Yes
    Fan Cooled
    A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

    Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

    Your Price $29.99

    NVX XKIT44 4-Gauge 4-Channel Wiring Kit

    4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

    Your Price $89.99

    Kicker 4-Channel RCA Audio Interconnect Cable

    4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

    Your Price $19.99

    NVX XIV45 4-Channel RCA Audio Interconnect Cable

    5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

    Your Price $23.99

    NVX V-Series RCA Interconnect Cable

    19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

    Your Price $11.99

    NVX XIX45 X-Series RCA Interconnect Cable

    16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

    Your Price $34.99

    StreetWires ZN9 Series Interconnect Cable

    16.4 ft. of 4-Channel RCA Cable with Rhodium-plated contacts and ZeroNoise construction for clear signal transfer!

    Your Price $74.77

    NVX XWS1225 12 AWG Speaker Wire

    25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $39.99

    NVX XWS1250 Speaker Wire

    50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $29.99

    NVX XWS1625 16 AWG Speaker Wire

    25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $15.99

    Belva BBSW127 12 AWG Speaker Wire

    12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $14.99

    Belva BBSW167 16 AWG Speaker Wire

    16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $12.99

    NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

    Comes with everything you need to upgrade your power and ground wire.

    Your Price $69.99

    Belva BBG3KT CCA 1/0 Gauge Big Three Kit

    Features everything needed to upgrade factory power and ground wire.

    Your Price $34.99

    XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

    1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

    Your Price $92.52

    270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

    Most Popular! 270+ amps at anything above 1800 rpm engine speed!

    Your Price $448.89

    240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

    240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

    Your Price $399.00

    240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

    Specifically designed to fit in tight spaces

    Your Price $399.00

    250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

    Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

    Your Price $399.99

    240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

    6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

    Your Price $399.00

    240 Amp S Series Alternator for 2011 Toyota Corolla

    Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

    Your Price $399.99

    240 Amp S Series Alternator for 2006-2011 Honda Civic

    15% more efficient than typical alternators

    Your Price $549.99

    370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

    WOW 370 AMPS! Elite series offers the highest possible amperage

    Your Price $699.00

    320 Amp S Series Alternator for Custom and Racing Applications

    Great for a Custom Project

    Your Price $499.00

    XS Power XP750 Special Edition

    12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

    Your Price $72.99

    Kinetik HC600-BLU

    BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

    Your Price $49.99

    XS Power D545

    12-Volt Deep Cycle AGM Power Cell with 800 Max Amps

    Your Price $109.99

    NVX XCAP1F

    True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

    Your Price $59.99

    Rockford Fosgate RFC1D - Top of the Line 1 Farad

    Digital 1.0 Farad Car Audio Capacitor for up to 1000W Max

    Your Price $99.99

    Belva BB1D

    1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

    Your Price $21.99

    NVX XTGSP2

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Scosche TK12

    The perfect kit for installing a car stereo and amplifier for the first time

    Your Price $18.99

    Five Piece Installer's Panel Removal Tool Kit

    Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

    Your Price $11.99

    Universal Wire Puller

    Make your installation less of a chore and save yourself the stretch

    Your Price $7.99

    8 Gauge Ring Terminals, 5/16" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $1.99

    0/1 Gauge Ring Terminals, 3/8" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $4.99

    PRO Series Classic Short GM Battery Post Shoc-Krome

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $4.99

    PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $6.99

    200 Amp Relay Isolator (BIR200)

    Great for isolating a second batter making it dedicated to the stereo system

    Your Price $39.99

    120 Amp 4-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $69.97

    240 AMP 3-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $124.99

    World's Smallest AFS / Mini ANL Fuse Holder

    Accepts 4 gauge or 8-gauge wire

    Your Price $12.99

    ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

    No-fail termination and current flow, it helps keep your system protected and running smoothly

    Your Price $19.99

    4 Pack of 80 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

    Your Price $3.99

    4 Pack of 100 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

    Your Price $3.99

    4 Pack of 150 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

    Your Price $3.99

    2 Pack of 200 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 200 Amp ANL Fuses

    Your Price $2.99

    2 Pack of 300 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 300 Amp ANL Fuses

    Your Price $2.99

    Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

    Great for amplifiers that do not accept a large gauge power wire

    Your Price $5.99

    Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

    Great for amplifiers that do not accept large gauge power wire

    Your Price $6.21

    NVX VUBT2

    Universal Bluetooth Audio Receiver

    Your Price $26.99

    NVX XUBT3

    Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

    Your Price $74.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-APCL-1504-OBC

    UPC

    784644415948

    Weight

    9.40lbs

    Internal SKU

    LS-apcl1504-OBCra219503

    Internal Product ID

    97508

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Audiopipe APCL-1504 OPEN BOX COMPLETE