Expert Service 1-661-257-9993 [Hours]

MB Quart Z-Line Complete Full-Range Audio Package w/ Premium Amp Wiring Kit

Z-Line 6-1/2" Component & Coaxial Speakers, Class A/B 4-Channel & Monoblock, (2) 12" Reference Series Subwoofer , and Complete Kicker Amp Kit

We apologize

This item has been discontinued

Item Added to Cart

MB Quart Z-Line Complete Full-Range Audio Package w/ Premium Amp Wiring Kit

Z-Line 6-1/2" Component & Coaxial Speakers, Class A/B 4-Channel & Monoblock, (2) 12" Reference Series Subwoofer , and Complete Kicker Amp Kit

$727.11

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$89.99
Add Warranty
3 years of protection

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$11.99

Add
XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

$92.52

Add

Don't see the accessory you're looking for?
View all available accessories for the MB Quart Z-Line Complete Full-Range Audio Package w/ Premium Amp Wiring Kit.

Get FAST answers from customers ASK a Question See questions answers

Will fit most 6x9" and 5x7"/6x8" locations,
with appropriate speaker adapter. Click "Related Items" Tab.

MB Quart Audio Store

MB Quart ZC1-216

240W 2-Way 6-1/2" Z-Line Series Component Speakers
Quantity: 1

General Features:

  • SIZE Series TYPE Car Speakers/Component System
  • Power Handling:
    • Peak: 240x watts per set / 120 watts each side
    • RMS: 120 watts per set / 60 watts each side
    • Recommended Minimum Power: 60 watts RMS each
  • Composite basket w/original German-spec material
  • Mica-filled PP cone mated to UV butyl surround
  • 30mm ceramic coated titanium dome tweeter
  • Tweeter features nylon surround for lower fs
  • Removable phase lens allows the tweeter to be tuned for the application
  • Voice coil size and type
  • 4 ohms impedance
  • Frequency Response: 20 - 20,000 Hz
  • Top-mount Depth: 2.56"
  • Sensitivity: 88 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

MB Quart ZK1-116

240W 6-1/2" Z-Line Series 2-Way Coaxial Car Speakers
Quantity: 1

General Features:

  • 6-1/2" Z-Line Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 240 watts per pair / 120 watts each
    • RMS: 120 watts per pair / 60 watts each
  • Mica-filled PP cone mated to UV butyl surround
  • Composite basket w/original German-spec material
  • 1" (30mm) ceramic coated titanium dome tweeter
  • Tweeter features nylon surround for lower fs
  • 12bd/octave crossovers used throughout line
  • Removable phase lens allows the tweeter to be tuned for the application
  • 4 ohms impedance
  • Frequency Response: 20-20,000 Hz
  • Sensitivity: 88dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

MB Quart ZA1-320.4

320W 4-Channel Z-Line Series Class SQ A/B Amplifier
Quantity: 1

General Features:

  • Z-Line Series 4-Channel Class SQ A/B Amplifier
  • RMS Power Rating:
    • 4 ohms: 40 watts x 4 chan.
    • 2 ohms: 80 watts x 4 chan.
    • Bridged 4 ohms: 160 watts x 2 chan.
  • Fluid-FETS hand selected insulated MOSFETS
  • Focused mass heat sink designs
  • Q-Stasis preamp stage with wide input range
  • Top mounted controls for simple setup & adjustment
  • Elaborate preamplifier with extended control
  • Easy access mounting tabs for a secure install
  • LED power (green) and protect (red) indicators
  • Selectable 2Ch/3Ch/4Ch Modes
  • Selectable HPF/LPF /Full Crossover Settings
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 15 - 45,000 Hz
  • Signal to Noise Ratio: >90
  • Total Harmonic Distortion (THD): <0.5%
  • Variable Bass Boost: 0 to +12dB bass boost at 45Hz
  • Variable low-pass filter: 30- 250 Hz
  • Variable high-pass filter: 60 - 13,000 Hz
  • Fuse Rating: 25A x 2
  • CEA-2006 compliant amplifier
  • 8 gauge power and ground wiring is recommended for installation.
  • Dimensions: 9.20"W x 12.50"L x 2.20"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

MB Quart RWM304

350W 12" Reference Series Dual 4 Ohm Subwoofer
Quantity: 2

General Features:

  • 12" Dual 4 Ohm Reference Series Subwoofer
  • Power Handling:
    • Peak: 1400 watts per pair / 700 watts each
    • RMS: 700 watts per pair / 350 watts each
  • Impedance: 4 ohms
  • Injection molded polypropylene cone
  • UV Resistant butyl rubber surround
  • Heavy duty textured powder coat finish
  • Deep drawn heavy gauge stamped steel basket
  • Dual mirror image treated spiders
  • Spring loaded terminals
  • Low profile subwoofer design
  • 2" High temp aluminum voice coil
  • Red nomex spider
  • Anti-resonant magnet cover
  • Top-mount depth: 5-9/16"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

MB Quart ZA1-1000.1

1000W Monoblock Z-Line Series Class SQ A/B Amplifier
Quantity: 1

General Features:

  • Z-Line Series Monoblock Class SQ A/B Amplifier
  • RMS Power Rating:
    • 4 ohms: 475 watts x 1 chan.
    • 2 ohms: 750 watts x 1 chan.
    • 1 ohm: 1000 watts x 1 chan.
  • Fluid-FETS hand selected insulated MOSFETS
  • Focused mass heat sink designs
  • Q-Stasis preamp stage with wide input range
  • Top mounted controls for simple setup & adjustment
  • Elaborate preamplifier with extended control
  • Easy access mounting tabs for a secure install
  • LED power (green) and protect (red) indicators
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 15 - 250 Hz
  • Signal to Noise Ratio: >90
  • Total Harmonic Distortion (THD): <0.5%
  • Variable Bass Boost: 0 to +10 dB bass boost at 45Hz
  • Variable low-pass filter: 30- 250 Hz
  • Subsonic filter: 15- 35 Hz
  • Fuse Rating: 60A x 2
  • CEA-2006 compliant amplifier
  • 4 gauge power and ground wiring is recommended for installation.
  • Dimensions: 9.20"W x 12.50"L x 2.20"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kicker PKD4

Dual 4 Gauge Power Amplifier Installation Kit
Quantity: 1

Amplifier Kit Features:
  • Dual 4 Gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1500 watts
  • Premium power and ground wire provides optimal power transfer
  • Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
  • Twisted-pair technology eliminates noise for crystal clear sound
  • ANL Fuse holder offers ideal protection for high powered systems
  • Hyper-flex cable and wire
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Kit Includes:
  1. 17ft 4 AWG Blue Power Wire
  2. 2ft 8 AWG Blue Power Wires (x2)
  3. 4ft 8 AWG Gray Grounding Wire
  4. 17ft 16 AWG Speaker Wire
  5. 17ft 18 AWG silver remote turn on wire
  6. 100A mini-anl fuse
  7. DB4 distribution block
  8. Self-Tapping Grounding Bolts (x2)
  9. 18-22 AWG Red butt connector
  10. 3" zip-ties (x4)

Kicker KI24

4 Meters (13 ft.) 2-Channel K-Series RCA Audio Interconnect Cable
Quantity: 1

General Features:

  • 13 Ft. 2-Channel K Series Audio RCA Interconnect Cables
  • Black protected mesh with wire loom jacket
  • Unique cable winding patterns improve clarity and ensure consistent timing
  • Hyperflex protective jacket minimizes friction for easy install
  • Dual twisted pair conductors provide protection against interference
  • Integrated AR foil shield
  • RCA interconnect audio cable
  • Cable Length: 13 ft. (4m)
  • Color: Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kicker KI44

4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable
Quantity: 1

  • 4 Meters (13 ft.) 4-Channel RCA Audio Interconnect Cable
  • Dual twisted-pair, hyper-flex technology
  • Constructed of silver-tinned, oxygen-free copper for bass response and signal clarity
  • Silver-molded ends with gold-plated sure grip collars
  • Split center pin allows maximum signal transfer
  • Tactile-grip RCA ends
  • Color-code strain relief identifies front-rear/light-right channels
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Kicker QW1220

20 Ft. of 12 Gauge AWG Q-Series Speaker Wire
Quantity: 1

  • 20 Ft. of 12 AWG Q-Series Speaker Wire
  • Direct-connect engineering
  • Fewer connections for less signal distortion
  • Twisted-pair technology eliminates noise for crystal clear sound
  • Hyper-flex cable and wire
  • Jacket can be cut and and the wire split
  • Full spec cable is true to gauge
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Kicker KW1620

20 Ft. of 16 AWG K-Series Speaker Wire
Quantity: 3

  • 20 Ft.(6.1M) of 16 AWG Z-Series Speaker Wire
  • Direct-connect engineering
  • Fewer connections for maximum signal strength
  • Twisted-pair technology
  • Eliminates noise for crystal-clear sound
  • Hyper-flex cable and wire
  • Full spec cable is true to gauge
  • Blue and gray coloring to easily distinguish between positive and negative
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
2011 Kicker Authorized Online Dealer and eBay Seller

Amplifier Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

40 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

80 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

160 watts x 2 channels

Amplifier Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
475 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
750 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1000 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.5%
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
Full (AP)
Subsonic
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

60 - 13,000 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 250 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
15 - 35 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>90 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Titanium
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1400 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
700 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.96"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Reference (MB Quart)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1400 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
700 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20,000 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
88 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
9.5 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Red
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No

Recommended Enclosure Specifications

Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5.96"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

Your Price $11.99

Scosche TK12 Car Stereo Installation Kit

Includes panel removal tool, wire cutter/stripper, test light, RCA cable runner, screwdriver, and more!

Your Price $18.99

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $92.52

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $141.83

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Items we think you might want
SA68 main
Scosche SA68

The SA689 speaker adapters fit most aftermarket 5 1/4" and 6 1/2" speakers into 6" x 8" factory openings.

Your Price $6.99

82-5600 main
Metra 82-5600

•5 1/4" / 6-1/2 Component/Coaxial Speaker to 6" x 8" Adapter
• Works with 6.5" Speakers
• Installs in 5x7" and 6x8" Locations

Your Price $7.99

82-6901 main
Metra 82-6901

5-1/4" or 6-1/2" Speaker to 6" x 9" Mounting Hole Adapters • Mount your pair of 5-1/4" or 6-1/2" speakers in a 6" x 9" mounting hole

Your Price $5.99

SA69 main
Scosche SA69

The SA69 speaker adapters fit most aftermarket 5 1/4" and 6 1/2" speakers into 6 x 9" factory openings

Your Price $10.97

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

ZC1-216_ZK1-116_ZA1-320.4_2_RWM304_ZA1-1000.1_PKD4

Weight

58.30lbs

Internal SKU

zc1216_zk1116_za13204_2_rwm304_za110001_pkd4

Internal Product ID

97829

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MB Quart Z-Line Complete Full-Range Audio Package w/ Premium Amp Wiring Kit