Expert Service 1-661-257-9993 [Hours]

NVX JAD900.5 OPEN BOX COMPLETE

True 900W RMS, Full Range Class D 5-Channel Amplifier with Bass Remote

We apologize

This item has been discontinued

Item Added to Cart

NVX JAD900.5 OPEN BOX COMPLETE

True 900W RMS, Full Range Class D 5-Channel Amplifier with Bass Remote

$199.99

Keep Shopping

NVX XKIT46 4-Gauge 6-Channel Wiring Kit

6-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$129.99

Add
AudioControl LC6i (Black)

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

$109.99

Add
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$39.99

Add

Don't see the accessory you're looking for?
View all available accessories for the NVX JAD900.5 OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

NVX Store

NVX JAD Series Amplifiers

NVX's new line of Justice series amplifiers are perfect for those looking for a small footprint, high output amplifier. They boast an abundance of features such as variable high and low pass filters, pre-amp outputs, and gain level control. The sleek design of the chassis combined with the illuminated badge makes these amplifiers eye-catchers. The JAD900.5 5-channel includes a wired remote bass knob in order to manage bass levels from a user-defined location. The 5th mono channel is able to push 440W at 2 ohms to deliver a ton of power to one or more subwoofers.





Sonic Electronix Power Certified Amplifier

NVX's JAD900.5 5-channel amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings. Learn more about this amp's Sonic Electronix Certified Power Here!



Channel(s)
Impedance
Claimed Output
Certified Results
Dynamic Results
4
4 Ω
70W @ 14.4v
95W @ 14.79v
93W @ 14.81v
4
2 Ω
115W @ 14.4v
158W @ 14.72v
163W @ 14.79v
Mono
4 Ω
220W @ 14.4v
302W @ 14.79v
320W @ 14.77v
Mono
2 Ω
440W @ 14.4v
462W @ 14.70v
526W @ 14.70v



Item Condition:Open Box Complete

  • Item is cracked on one end
    • General Features:

      • Class D 5-Channel Amplifier with Bass Remote
      • RMS Power Rating:
        • 4 ohms: 70 watts x 4 chan. + 220 x 1 chan.
        • 2 ohms: 115 watts x 4 chan. + 440 x 1 chan.
        • Bridged, 4 ohms: 230 watts x 2 chan. + 440 x 1 chan. @ 2 ohms
      • Sonic Electronix Certified Power Rating*:
        • 4 ohms: 95 watts x 4 chan.
        • 2 ohms: 158 watts x 4 chan.
        • 4 ohms: 302 watts x 1 chan.
        • 2 ohms: 462 watts x 1 chan.
      • Non-regulated efficient S.M.P.S power supply design
      • Pulse Width Modulated MOSFET power supply
      • LED power (green) and protect (red) indicators
      • Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
      • High speed rectifying diodes
      • Soft start turn-on
      • 5/4/3 channel operation
      • 3-way protection circuitry (thermal, overload, and speaker short protection)
      • Heavy duty aluminum alloy heat-sink
      • Nickel-plated RCA level inputs
      • Nickel-plated screw terminals
      • Variable high-pass filter (40-4000 Hz, 24 dB/octave)
      • Variable low-pass filter (80-4000 Hz, 24 dB/octave)
      • Variable subsonic filter (20-38 Hz, 24 dB/octave)
      • Input Sensitivity: 200mV-6V
      • Frequency response: 20-20,000 Hz
      • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier
      • Dimensions: 6-7/10"W x 12-8/10"L x 1-8/10"H
      • Authorized Internet Dealer
      • 1-year Manufacturer's Warranty

      Extend your NVX Manufacturer's Warranty to 2 Years when you install your new NVX amplifier with a compatible NVX power installation kit! This offer is only available through Authorized NVX dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: NVX XAPK1D, NVX XKIT44, or NVX XAPK4

      *The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

    Power Specifications - Full Range Channels

    RMS Power @ 4 ohms

    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

    If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

    70 watts x 4 channels
    RMS Power @ 2 ohms

    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

    If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

    115 watts x 4 channels
    Bridged RMS Power

    Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

    Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

    230 watts x 2 channels

    Power Specifications - Subwoofer Channel

    RMS Power @ 4 ohms
    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
    220 watts x 1 channels
    RMS Power @ 2 ohms
    The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
    440 watts x 1 channels

    Amplifier Specifications

    Amplifier Series
    This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
    JAD (NVX)
    Amplifier Class

    An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

    Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

    Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

    Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

    D
    Number of Channels
    Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
    5
    Total RMS Power Output
    Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

    RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

    The RMS output figure is much more accurate than the peak rating when comparing products.

    800 watts
    Maximum Input Gauge Size
    This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
    4 AWG
    Minimum Impedance Unbridged
    The lowest impedance the amplifier will handle when it is not bridged.
    2 ohms
    Minimum Impedance Bridged
    The lowest impedance the amplifier will handle when it is bridged.
    4 ohms
    Speaker Level Inputs
    Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
    No
    Preamp Outputs
    Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
    No
    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    Low-Pass (LP)
    High-Pass (HP)
    Full (AP)
    High-Pass Crossover Frequency
    The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    40 - 4000 Hz
    Low-Pass Crossover Frequency
    The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    80 - 4000 Hz
    Subsonic Filter
    Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
    20 - 38 Hz
    Signal-to-Noise Ratio
    This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
    105 dB
    Bass Boost
    The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
    0 - 12 dB
    Bass/Gain Remote
    If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
    Yes
    Fan Cooled
    A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
    No
    Fuse Rating
    The amperage and the number of fuse(s) an amp requires.
    40A x 2 
    CEA-2006 Compliant
    Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
    • RMS Power
    • Signal-to-Noise Ratio

    This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

    Yes
    Sonic Certified Amplifier
    Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
    Yes
    Hi-Res Audio Compatible
    This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX XKIT46 4-Gauge 6-Channel Wiring Kit

    6-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

    Your Price $129.99

    Belva BAK46 6-Channel 4 Gauge Amplifier Installation Kit

    Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

    Your Price $57.95

    AudioControl LC6i (Black)

    6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

    Your Price $109.99

    NVX XIV65 V-Series Interconnect Cable

    5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

    Your Price $39.99

    Belva BBIC65 Interconnect Cable

    5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)

    Your Price $19.99

    NVX XWS1250 Speaker Wire

    50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $29.99

    NVX XWS1625 16 AWG Speaker Wire

    25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

    Your Price $15.99

    Belva BBSW127 12 AWG Speaker Wire

    12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $14.99

    Belva BBSW167 16 AWG Speaker Wire

    16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

    Your Price $12.99

    NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

    Comes with everything you need to upgrade your power and ground wire.

    Your Price $69.99

    Belva BBG3KT CCA 1/0 Gauge Big Three Kit

    Features everything needed to upgrade factory power and ground wire.

    Your Price $34.99

    XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

    1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

    Your Price $92.52

    270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

    Most Popular! 270+ amps at anything above 1800 rpm engine speed!

    Your Price $448.89

    240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

    240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

    Your Price $399.00

    240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

    Specifically designed to fit in tight spaces

    Your Price $399.00

    250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

    Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

    Your Price $399.99

    240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

    6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

    Your Price $399.00

    240 Amp S Series Alternator for 2011 Toyota Corolla

    Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

    Your Price $399.99

    240 Amp S Series Alternator for 2006-2011 Honda Civic

    15% more efficient than typical alternators

    Your Price $549.99

    370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

    WOW 370 AMPS! Elite series offers the highest possible amperage

    Your Price $699.00

    320 Amp S Series Alternator for Custom and Racing Applications

    Great for a Custom Project

    Your Price $499.00

    XS Power XP750-CK

    XP750 AGM Battery + Installation Kit for 1000-1500 Watt Audio Sytems

    Your Price $149.99

    Kinetik HC1200-BLU

    Kinetik BLU Series 1200 Watt 12V High Current AGM Car Audio Power Cell - Battery

    Your Price $109.85

    Stinger SPP680

    680 Amp SPP Series Dry Cell Battery with Protective Steel Case

    Your Price $119.99

    Belva BB1D

    1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

    Your Price $21.99

    NVX XTGSP2

    Perfect for safely troubleshooting and testing audio systems

    Your Price $29.99

    Scosche TK12

    The perfect kit for installing a car stereo and amplifier for the first time

    Your Price $18.99

    Five Piece Installer's Panel Removal Tool Kit

    Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

    Your Price $11.99

    Universal Wire Puller

    Make your installation less of a chore and save yourself the stretch

    Your Price $7.99

    8 Gauge Ring Terminals, 5/16" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $1.99

    0/1 Gauge Ring Terminals, 3/8" Opening

    Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

    Your Price $4.99

    PRO Series Classic Short GM Battery Post Shoc-Krome

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $4.99

    PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

    Side post battery adapter for GM type batteries (Positive or Negative)

    Your Price $6.99

    200 Amp Relay Isolator (BIR200)

    Great for isolating a second batter making it dedicated to the stereo system

    Your Price $39.99

    120 Amp 4-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $69.97

    240 AMP 3-Post Battery Isolator

    Prevents primary battery discharge and extends battery life

    Your Price $124.99

    World's Smallest AFS / Mini ANL Fuse Holder

    Accepts 4 gauge or 8-gauge wire

    Your Price $12.99

    ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

    No-fail termination and current flow, it helps keep your system protected and running smoothly

    Your Price $19.99

    4 Pack of 80 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

    Your Price $3.99

    4 Pack of 100 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

    Your Price $3.99

    4 Pack of 150 Amp Nickel-Plated MANL Fuse

    Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

    Your Price $3.99

    2 Pack of 200 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 200 Amp ANL Fuses

    Your Price $2.99

    2 Pack of 300 Amp Nickel-Plated ANL Fuse

    Two fuses per order. High quality 300 Amp ANL Fuses

    Your Price $2.99

    Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

    Great for amplifiers that do not accept a large gauge power wire

    Your Price $5.99

    Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

    Great for amplifiers that do not accept large gauge power wire

    Your Price $6.95

    XIX2025 Strapping RCA

    0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

    Your Price $9.99

    NVX VUBT2

    Universal Bluetooth Audio Receiver

    Your Price $26.99

    NVX XUBT3

    Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

    Your Price $74.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-JAD900.5-OBC

    Weight

    9.00lbs

    Internal SKU

    LS-jad9005-OBCra224487

    Internal Product ID

    98012

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: NVX JAD900.5 OPEN BOX COMPLETE