Expert Service 1-661-257-9993 [Hours]

Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE

600W 12" Punch Stage 3 Dual 4 ohm Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE

600W 12" Punch Stage 3 Dual 4 ohm Subwoofer

$139.99

Keep Shopping

12" Dual Hatchback Style Medium Sealed Subwoofer Enclosure

CARB Compliant, 3/4" MDF Dual Hatchback Style Sealed Enclosure w/ Premium Carpeted Finish

$69.95

Add
25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

$37.85

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE.

Get FAST answers from customers ASK a Question See questions answers

 

Item Condition: Open Box Incomplete

  • Missing screws and manual
  • Item is used, has been installed, and has minor marks from screws
    • Product Features

      • 12" Punch P3 Series Dual 4 Ohm Subwoofer
      • Power Handling:
        • Peak: 1200 watts
        • RMS: 600 watts
      • Impedance: 4 ohm
      • Anodized aluminum heat sinking cone & dustcap for strength and durability
      • Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
      • Dual tear & fatigue resistant linear poly cotton spiders
      • Optimized motor magnetics with extended pole and bumped backplate
      • Fatigue resistant and reduced strain stitched tinsel leads
      • Multi point high temp/strength neck joint bonding technique
      • Sturdy 16 gauge compound bend frame geometry
      • Semi-Flexible PVC removable protective motor cover
      • Custom insulated compression input terminal assembly
      • Proprietary spider venting/cooling technique
      • Decorative die cast trim ring
      • Custom 10-AWG nickel plated push terminals
      • High temperature 4-layer 2-1/2" voice coil with spun laced nomex insulating reinforcement collar
      • 102 oz Double stacked ferrite magnet structure
      • Frequency response: 27.7-250 Hz
      • Sensitivity: 85 dB
      • Xmax: 16.2 mm
      • Mounting Depth: 6-11/16"
      • Cutout Diameter: 11-1/4"
      • 1-year Sonic Electronix Warranty

    Product History:

    Rockford Fosgate LS-P3D4-12-OBI thumbnail
    (newest, current model)
    Rockford Fosgate P3D412 thumbnail
    (previous model, replaced by Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE)
    Rockford Fosgate P312D4 thumbnail
    (previous model, replaced by Rockford Fosgate Punch P3D412 (09P3D412))

    Subwoofer Specifications

    Subwoofer Series
    Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
    Punch P3 (Rockford Fosgate)
    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    12"
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    1200 watts
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    600 watts
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Dual
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Voice Coil Diameter
    Diameter of voice coil, usually measured in inches.
    2.5"
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    27.7 - 250 Hz
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    85 dB
    Xmax (millimeters)
    Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
    16.2 mm
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle
    Main Cone Color
    This is the color of the speaker's or subwoofer's cone.
    Black
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Anodized Aluminum
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Santoprene Rubber
    Magnet Structure
    Defines the overall structure of the subwoofers magnet.
    Double Stacked
    Subwoofer Grille
    Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
    Optional (Accessory required and sold separately)
    Re-Cone Kit Available
    Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
    No

    Recommended Enclosure Specifications

    Recommended Enclosure Type
    This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

    Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

    Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

    Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

    Ported / Vented
    Sealed
    Minimum Sealed Box Volume
    This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    0.75 cubic feet
    Maximum Sealed Box Volume
    This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    1.25 cubic feet
    Minimum Ported Box Volume
    This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    1.79 cubic feet
    Maximum Ported Box Volume
    This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
    1.79 cubic feet
    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    6-11/16"
    Cutout Diameter
    The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
    11-1/4"
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    No

    Electromechanical Parameters

    Free-Air Resonance (Fs)
    The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
    27.7 Hz
    Equivalent Compliance (Vas)
    This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
    57.7 liters
    Total Speaker Q Value (Qts)
    This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
    0.52
    Electrical Q Value (Qes)
    The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
    0.57
    Electrical Resistance of Voice Coil (Re)
    Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
    6.40 ohms
    Mechanical Q Value (Qms)
    This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
    5.60

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    12" Dual Hatchback Style Medium Sealed Subwoofer Enclosure

    CARB Compliant, 3/4" MDF Dual Hatchback Style Sealed Enclosure w/ Premium Carpeted Finish

    Your Price $69.95

    12" SingleHatchback Style Small Sealed Subwoofer Enclosure

    CARB Compliant, 3/4" MDF Dual Hatchback Style Sealed Enclosure w/ Premium Carpeted Finish

    Your Price $39.99

    12" Single Hatchback Style Medium Sealed Subwoofer Enclosure

    CARB Compliant, 3/4" MDF Single Hatchback Style Sealed Enclosure w/ Premium Carpeted Finish

    Your Price $43.95

    12" Medium Sealed Subwoofer Enclosure

    CARB Compliant, 3/4" MDF Sealed Enclosure Lined with Premium Carpeted Finish

    Your Price $39.99

    25 ft. of Streetwires 12 Gauge Speaker Cable

    You'll need speaker wire to hook up that new subwoofer!

    Your Price $37.85

    Belva 23 ft. of 12 Gauge Speaker Wire

    Ultra-flexible PVC blended jacket for easy installation.

    Your Price $14.99

    20 Square Feet of Sound Dampening Material

    NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

    Your Price $53.99

    Stinger Sound Dampening Trunk Kit

    Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

    Your Price $64.87

    Dynamat Sound Dampening Trunk Kit

    Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

    Your Price $87.63

    2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Universal rubber roller to make it easy to install sound dampening.

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    Cordless Multi-Functional Heat Tool Soldering Iron Kit

    Continuous working lock allows you to work without holding down trigger.

    Your Price $74.99

    12 oz. Can of Adhesive Spray

    Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

    Your Price $8.97

    Gold Plated Dual Terminal Banana Plug Connector

    Enables an expandable, secure connection accepting up to 8 gauge wire.

    Your Price $1.99

    Universal 12" Subwoofer Grille

    Keep your subwoofer safe from accidental damages with this amazing grill.

    Your Price $19.95

    Universal 12" Subwoofer Grille

    Keep your subwoofer safe from accidental damages with this amazing grill.

    Your Price $19.95

    12" Protective Waffle Subwoofer Grille

    Keep your subwoofer looking amazing while keeping it safe.

    Your Price $6.99

    Scosche SPL Meter

    Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

    Your Price $21.99

    1 Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE Subwoofer

    Mono Amp

    2 Channel Amp - Bridged

    2 Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE Subwoofers

    Mono Amp

    Mono Amp - Option 1

    2 Channel Amp

    2 Channel Amp - Bridged

    4 Channel Amp - Bridged

    3 Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE Subwoofers

    Mono Amp

    4 Channel Amp

    4 Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE Subwoofers

    Mono Amp

    2 Channel Amp

    2 Channel Amp - Bridged

    4 Channel Amp

    Browse 2 questions and 5 answers
    Hide answersShow all answers | Sort by
    What amp will I need to power 2 of these and will I need a separate battery to power them? I currently have a 2000 Honda Accord and I'm unsure if I would need one.
    A shopper on Dec 31, 2015
    Rockford Fosgate LS-P3D4-12-OBI
    Rockford Fosgate LS-P3D4-12-OBI
    Rockford Fosgate P3D4-12
    Rockford Fosgate P3D4-12
    Best Answer: It would be a good idea to go with a extra battery, but it is possible to run these without a battery. Although it can be complicated and costly it is the best way to wire your system. Especially because Honda's batteries are not very large in comparison to my trucks dual battery configuration. I went with the Hifonics Brutus BRX 1100.1D Super D Class amplifier. It has provided high quality performance at a price point that cannot be beaten in my mind. I have owned Hifonics amps before and they are all still running fine, Although, It lacks the bells and whistles and name recognition of the more expensive amps for a mid level system build it is the right choice.
    Sincerely, Gus
    Reply · Report · Gus R on Jan 1, 2016
    · Add Answer · I Have This Question Too (0)
    Would this sub be able to handle 600 watts rms? Also between this sub and Rockford fosgate p3 12, what would you choose?
    Scott A on Jul 19, 2015
    Rockford Fosgate LS-P3D4-12-OBI
    Rockford Fosgate LS-P3D4-12-OBI
    American Bass XD1244
    American Bass XD1244
    Best Answer: Hello Scott,

    With the proper tune, responsibility and clean signal, 600W would be perfectly fine.

    In regards to the comparison, we would be partial to the Rockford Fosgate P3, based purely on superior build quality. However, we'll submit your question and see what others have to say (hopefully).
    Reply · Report · Rick MStaff on Jul 19, 2015
    · Add Answer · I Have This Question Too (0)

    Product Summary

    Manufacturer

    Model Number

    LS-P3D4-12-OBI

    UPC

    780687332761

    Weight

    22.00lbs

    Internal SKU

    LS-p3d412-OBIra225175

    Internal Product ID

    98226

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Rockford Fosgate Punch P3D4-12 (Newest Model) OPEN BOX INCOMPLETE

    • 3Sixty3 Aftermarket Setup Wizard Tutorial
    • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?