Expert Service 1-661-257-9993 [Hours]

Pyle PLBW104 OPEN BOX COMPLETE

1000W 10" Blue Wave Series Dual 4 Ohm Subwoofer

We apologize

This item has been discontinued

Item Added to Cart

Pyle PLBW104 OPEN BOX COMPLETE

1000W 10" Blue Wave Series Dual 4 Ohm Subwoofer

$24.99

Keep Shopping

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Pyle PLBW104 OPEN BOX COMPLETE.

Get FAST answers from customers ASK a Question See questions answers

Blue Wave Series

Pyle’s Blue Wave series speakers don’t just sound great – they look great, too. Feast your eyes upon the azure curves of Pyle’s Blue Wave series and you’ll agree. The PLBW104 is a 10” booming 1000 watt subwoofer designed with the bass lover in mind. This subwoofer will make your music growl in your vehicle or at home, in any type of enclosure: sealed, vented, or open-air. The blue injected molded cone looks great – and thanks to a 70 oz. magnet, non-fatiguing big rubber suspension, and a rubber magnet boot, it sounds great too. The flat progressive spider design improves the speaker’s mechanical stability – increasing the life of your speaker and keeping your sound clearer over time. Connect using the silver plated terminals for a distortion-free sound.

Item Condition: Open Box Complete

  • Box is Ripped
    • General Features:

      • 10" Dual 4 Ohm Blue Wave Series Subwoofer
      • Power Handling:
        • Peak: 1000 watts
      • Impedance: Dual 4 ohms
      • Blue injection molded cone
      • Non-fatiguing big rubber suspension
      • Bumped vented extended pole piece
      • Silver plated terminal
      • Flat progressive spider
      • New wave-like rubber gasket
      • Rubber magnet boot
      • 2" High temperature dual kapton voice coil
      • Magnet weight: 70 oz
      • Resonance Frequency (Fs): 50
      • Top-mount depth: 5-1/8"
      • Sensitivity: 85 dB
      • Authorized Internet Dealer
      • 1-year Manufacturer's Warranty

    Subwoofer Specifications

    Subwoofer Series
    Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
    Blue Wave (Pyle)
    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    10"
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    1000 watts
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Dual
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    Voice Coil Diameter
    Diameter of voice coil, usually measured in inches.
    2"
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    85 dB
    Subwoofer Design
    This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

    Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

    Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

    Round / Circle
    Main Cone Color
    This is the color of the speaker's or subwoofer's cone.
    Blue
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    Injection Molded Polypropylene (IMPP)
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Rubber
    Magnet Structure
    Defines the overall structure of the subwoofers magnet.
    Single Stacked
    Subwoofer Grille
    Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
    No
    Re-Cone Kit Available
    Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
    No

    Recommended Enclosure Specifications

    Top-Mount Depth
    The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
    5-1/8"
    Cutout Diameter
    The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
    10-5/8"
    Shallow Mount Installation
    This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

    Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

    No

    Electromechanical Parameters

    Free-Air Resonance (Fs)
    The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
    50 Hz
    Total Speaker Q Value (Qts)
    This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
    0.72
    Electrical Q Value (Qes)
    The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
    0.84
    Mechanical Q Value (Qms)
    This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
    4.92

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Accessory Tools and Products

    Accessories added

    NVX 25 ft. of True Spec 12 Gauge Speaker Wire

    100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

    Your Price $39.99

    25 ft. of Streetwires 12 Gauge Speaker Cable

    You'll need speaker wire to hook up that new subwoofer!

    Your Price $37.85

    Belva 23 ft. of 12 Gauge Speaker Wire

    Ultra-flexible PVC blended jacket for easy installation.

    Your Price $14.99

    20 Square Feet of Sound Dampening Material

    NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

    Your Price $53.99

    Stinger Sound Dampening Trunk Kit

    Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

    Your Price $64.99

    Dynamat Sound Dampening Trunk Kit

    Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

    Your Price $94.95

    2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Universal rubber roller to make it easy to install sound dampening.

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

    Your Price $18.99

    Cordless Multi-Functional Heat Tool Soldering Iron Kit

    Continuous working lock allows you to work without holding down trigger.

    Your Price $74.99

    12 oz. Can of Adhesive Spray

    Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

    Your Price $8.99

    Gold Plated Dual Terminal Banana Plug Connector

    Enables an expandable, secure connection accepting up to 8 gauge wire.

    Your Price $1.99

    Universal 10" Subwoofer Grille

    Keep your subwoofer safe from accidental damages with this amazing grill.

    Your Price $16.99

    Universal 10" Subwoofer Grille

    Keep your subwoofer safe from accidental damages with this amazing grill.

    Your Price $19.95

    10" Protective Waffle Subwoofer Grille

    Keep your subwoofer looking amazing while keeping it safe.

    Your Price $3.44

    Scosche SPL Meter

    Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

    Your Price $21.99

    Browse 1 question and 1 answer
    Hide answersShow all answers | Sort by
    Why did you choose this?
    Sonic Electronix Store
    Good price for the features that the driver offers.
    Ethan G on Jul 4, 2015

    Product Summary

    Manufacturer

    Model Number

    LS-PLBW104-OBC

    Weight

    9.50lbs

    Internal SKU

    LS-plbw104-OBCra227830

    Internal Product ID

    98614

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Pyle PLBW104 OPEN BOX COMPLETE